Atari Explorer Online: 4-Sep-93 #0215

From: Bruce D. Nelson (aa789@cleveland.Freenet.Edu)
Date: 09/05/93-11:55:15 AM Z

From: aa789@cleveland.Freenet.Edu (Bruce D. Nelson)
Subject: Atari Explorer Online: 4-Sep-93 #0215
Date: Sun Sep  5 11:55:15 1993

 :: Volume 2 - Issue 15      ATARI EXPLORER ONLINE      4 September 1993 ::
 ::                                                                      ::
 ::  ATARI .............. News, reviews, & solutions ............ ATARI  ::
 ::    EXPLORER ............ for the online Atari .......... EXPLORER    ::
 ::       ONLINE ................. Community .............. ONLINE       ::
 ::                                                                      ::
 ::        Published and Copyright = 1993 by Subspace Publishers         ::
 ::         """""""""""""""""""""""""""""""""""""""""""""""""""          ::
 ::  Publisher ........................... Michael Lindsay   EXPLORER    ::
 ::   Editor .................................. Travis Guy   AEO.MAG     ::
 ::    News and Features Editor ............... Ron Kovacs   Z-NET       ::
 ::     Assistant Editor GEnie............... Ron Robinson   EXPLORER.1  ::
 ::      Assistant Editor CompuServe......... Albert Dayes   AEO.1       ::
 ::       Assistant Editor Delphi........ Andreas Barbiero   AEO.2       ::
 ::        Assistant Editor Internet....... Timothy Wilson   AEO.8       ::
 ::         Atari Asylum .................. Gregg Anderson   AEO.7       ::
 ::          Unabashed Atariophile .... Michael R. Burkley   AEO.4       ::
 ::           Atari Artist .................. Peter Donoso   EXPLORER.2  ::
 ::                                                                      ::
 ::                              Contributors                            ::
 ::                              """"""""""""                            ::
 ::               Ken Baum   Robert G. Brodie   Jerry Davis              ::
 ::                                                                      ::
 ::                      Telecommunicated to you via:                    ::
 ::                      """"""""""""""""""""""""""""                    ::
 ::                             GEnie: AEO.MAG                           ::
 ::                         CompuServe: 70007,3615                       ::
 ::                             Delphi: AEO_MAG                          ::
 ::                      Fnet: AEO Conference, Node 706                  ::
 ::                  AtariNet: AEO Conference, Node 51:1/10              ::
 ::                                                                      ::

                              Table of Contents

* From the Editors ....................................... There is a time.

* Z*NET Newswire ...,,,,,,,,........... Atari posts Second Quarter results.

* Dateline: Atari! ............. Falcon030 and Jaguar news direct from Bob.

* Atari Artist ............. New hardware, including video editing for the
                              Falcon030 from Wizztronics? Peter interviews.

* Houston Atari Safari ......... Jerry Davis reports on a hot day in Texas.

* AEO Calendar of Events ............... Events to note in the World Atari.

* Delphi Jaguar RTC ............... Bob and Sam Tramiel meet the videogame
                                        crowd to talk about the new Jaguar.

* Atari Asylum ....................... More ScreenBlaster tests from Gregg.

* The Unabashed Atariophile .............. New PD and Shareware files made
                                                 for _your_ Atari computer.

* The Second Twenty Questions .............. Atari Corp. answers questions
                                                        posed by CIS users.

* An Open Letter from Bob Brodie ......... On the ongoing online imbroglio.

* How Many Colors? ................. An AEO reader wanted to know how many
                                     colors just were in those Targa files.

* News from Usenet ............... Tim digs up more news from the Internet.

* Andreas' Den ................. Still in the Orient, Andreas thinks small.

* Developing News ....................................... STraight FAX 2.0
                                                           Oregon Research
                                                        CyRel Catalog Disk
                                                             ATARI UNITED!

* Shutdown ...................................................... "YOU DO."


 |||  From the Editors ....... Atari Explorer Online: The Next Generation
 |||  Travis Guy
/ | \ GEnie: AEO.MAG   Delphi: AEO_MAG   Internet: AEO.MAG@GENIE.GEIS.COM

Greetings everyone! Here in America, it's the Labor Day weekend - the
traditional end of summer, and for our children, the marker for the
beginning of another school year. Labor Day, a harbinger of change.
Hurricane Emily skirted across the Outer Banks of North Carolina
before changing course into the Atlantic; David Letterman is back on
late night television after changing networks, and he's in vintage
form ("Same Dave, better time, different station." - Yep, those
promos are everywhere.); and Atari's role in the marketplace is
changing, with the respect that accompanies the excitement generated
by the new Jaguar.

I'd like to thank all of the readers who took the time to send us
feedback on our Jaguar Special Edition. Responding to y'all has kept
me busy these last two weeks (and has grown to be the part of my job
that I enjoy the most), and I would like to encourage more EMails. As
Editor of AEO, it is my duty to see that the magazine reflects your
interests. Keep those messages coming!

What I've seen is that there is overwhelming interest in the Atari
Jaguar, enough so that I can't see why it won't be a phenom when it's
released. Oct-Nov-Dec for New York and San Francisco, and early 1994
for the US and Europe. Late maneuvering by Nintendo and 3DO shows that
they are clearly worried about, "that upstart, Atari." This battle
should be fascinating. Back in the 70s, Atari _created_ videogames.
Today, Atari has the power to _redefine_ videogames. Again, the next
18-24 months should be interesting.

For those of you who were introduced to AEO with our Jaguar Special
Edition, welcome to an ordinary, text-only edition of the best online
source there has ever been for Atari news. This issue is our largest
to date; there is so much that is happening in the World Atari these
days, that I had to make it all fit. (And like me, it wound up too
big. <grin>)

If you have ever read AEO all the way through to EOF, you would have
noticed a cryptic tagline that sits just above the legal notices. The
line reads "DNFTEC" and stands for "Do Not Feed The Energy Creature."
It's a gentle reminder (to me, if no one else) to ignore slight, snide
comments made while online. In most cases, Energy Creatures are
harmless, but will Feed off of your replies to them, grow in size, and
continue their juvenile attacks. Sometimes, however, the Energy
Creature isn't harmless, and is self-sustaining.

There's a open letter from Bob Brodie to Ralph Mariano in this issue
on a subject that AEO has steadfastly refused to cover. The GEnie ST
RT / Lexicor / STReport dispute has been waged in sometimes vitriolic
style over the past few months, and despite pleas from some AEO
readers to balance out the "coverage," we have remained aloof.
However, stands must be taken. After an online exchange with Mr.
Mariano this week, Bob Brodie felt compelled to clear the air of the
charges and countercharges being levelled. While this isn't AEO's
usual fare, together, the editorial staff felt that Bob's point of
view as an outsider should be expressed. We have always encouraged
feedback; and here too, if you have any comment on this issue, please
send EMail to me, your editor.


 |||   Z*NET Newswire
 |||   By: Ron Kovacs
/ | \  GEnie: Z-NET      CIS: 75300,1642      Delphi: ZNET

//// ATARI REPORTS SECOND QUARTER RESULTS - Atari recently reported
=========================================   its operations for the
second quarter ended June 30, 1993. Net sales for the quarter were
$5.7 million as compared to $23.3 million for the same quarter in
1992. During the quarter, Atari incurred an operating loss of $4.0
million as compared to an operating loss for the second quarter of
1992 of $45.0 million. In addition, during the quarter the company
incurred loss on exchange of $3.1 million and had other income items
totalling $0.5 million, which resulted in a net loss for the second
quarter of 1993 of $6.6 million as compared to $39.7 million in 1992.
Commenting on the results, Sam Tramiel, president of Atari, said, "The
company has focused all of its efforts on the development and launch
of its new multi-media video entertainment system called Jaguar, which
will be launched in the fourth quarter of this year in the New York
and San Francisco markets. We have approximately $35 million in cash."

=================================================   Devices has
disclosed that its scientists may have incorporated parts of Intel's
computer language in its new "built from scratch" microprocessor. An
AMD spokesman said the development will not significantly delay
release of the new chip, which could occur as early as this month or
in October. AMD had previously pledged that it would release the
AM486SX chip during the current quarter. The new chip was designed to
be a non-cloned version of Intel's 486 with the circuitry largely
reverse-engineered from Intel's. The chip will be "pin-compatible" -
that is, like other AMD chips, it will be able to be plugged into
sockets designed for Intel chips.

//// COMPUTER ORDERS RISE - A government report on factory goods
=========================   orders, released earlier this week shows
that demand for computers is rising sharply. Overall, orders for all
products made in U.S. factories and manufacturing shops is growing
slowly, rising 3.7 percent from July 1992 to July 1993. But orders for
computers and office equipment climbed 21.6 percent in that one-year
span. Computer and office equipment orders each month this year: -up
8.1 percent, July; down 5.3 percent, June; up 6.1 percent, May; down
2.5 percent, April; down 4.8 percent, March; up 9.6 percent, February;
down 0.8 percent, January.

//// HP ANNOUNCES TAKE BACK PROGRAM - Hewlett Packard has announced a
===================================   pilot program to collect used
inkjet printer cartridges. The cartridges are used in HP's
market-leading DeskJet brand printers, as well as in its inkjet
plotters and fax machines. In the U.S. program, customers may return
their used cartridges to any participating dealer. HP will provide
dealers with cartridge collection bins and retrieve the cartridges
periodically at no cost to the dealers. After the cartridges are
collected, they will be sent to processing facilities where the
precious metals (gold and copper) used in the cartridges will be
reclaimed. Ore smelters will use the remaining plastic parts as an
energy source. The plastic, which can be burned at extremely high
temperatures, is a much cleaner source of energy than traditional
fossil fuels.


 |||   Dateline: Atari!
 |||   Captured and Edited by: Ron Kovacs
/ | \  Courtesy: GEnie

<[Host - Lou] ST.LOU> Welcome to the First Anniversary Edition of
Dateline Atari! with Bob Brodie. This evening we have not selected a
specific topic. Instead the topics of discussion will be your choice.
No doubt Bob will provide us with the latest news on Atari computers
and game machines. The last few conferences have been dedicated to
those topics and I expect there is still great interest in developing
and marketing those products.

We also have some special giveaways to celebrate the anniversary
edition of this conference. Sometime during the evening Bob will post
a skill-testing question. If you answer correctly, you may be one of
the winners of Atari Works - the integrated application, MultiTOS or
SpeedoGDOS. Just a quick note... only paying customers are eligible
for the prizes :-) Without further ado............. Here's Bob!

<BOB-BRODIE> Paying customers only!!!!

Good evening everyone! And it's a great pleasure to gather together on
the eve of this long weekend. I hope that you have a chance to enjoy
being with your loved ones, relax and just enjoy the long weekend. I
know that here at Atari, we're all looking forward to it.

It is with great joy that I look back at our last year together in
this setting! Here on our official online service, GEnie, we had
wonderful series of monthly conferences!! We've had quite a series of
events to share. In addition to being able to visit with you
personally, I've been privileged to have as special guests Eric Smith,
the author of MultiTOS, Pradip Fathepuria, author of Atari Works, and
James Grunke, Director of Atari Music. In the very near future, we'll
be scheduling another special CO to discuss in greater detail our
exciting new 64 bit home entertainment system, the Jaguar!!!

I'd like to take this opportunity to that Darlah Potechin and her
entire staff of sysops for making the Atari RTs on GEnie THE PLACE TO
BE for all Atari owners! Without their help and support, our efforts
to support our customers online wouldn't be nearly as effective as
they are. Further, I'm grateful that she lets me have these monthly
events! Not every sysop is as supportive of real time conferences as
Darlah, and as the contract holder of the RT, it really is up to her
if we have these events. Thanks, Darlah! I'm grateful for your
support!!! I also appreciate the hosts of these real time events, as
they make sure that things are always "going the right way" and keep
the flow in tow! <grin> Lou, Brian, and Mike...thank you!!!

As a part of the commemoration of the one year anniversary of
Dateline: Atari, tonight we're going to be giving away a number of
Atari products! The way that we'll do this is that I'll include in my
opening remarks some key information that you'll have to repeat later
on in the CO. The first one with the correct answer will have his
choice of our prizes! We're giving away one copy of Atari Works, two
copies of MultiTOS, two copies of SpeedoGDOS, and as SPECIAL EXTRA
BONUS, I've added a copy of our latest Lynx offering, Lemmings to the
prize list! First correct answer picks first, second second, and so
on. So pay attention, and get those capture buffers open! <grin>

Let's begin our time together tonight discussing the BEST handheld
game system on the market; the Atari Lynx! We just gotten two more
games in stock: Lemmings and Jimmy Connors Tennis. Approval has been
given to start manufacturing on two more titles, Malibu Bikini Beach
Volleyball, and Ninja Gaiden III. Lemmings is an excellent conversion
of the popular computer game, brought to life with the superb color of
the Lynx. It's really a fun game!! At our house, my 11 year old has
always been semi-interested in the Lynx. When I brought home Lemmings,
he couldn't put it down for hours!!! I guess that's one of the highest
endorsements I can give it: it captivates the interest of Brian Andrew
Brodie. <grin> Truly a fun game, and reviewers have their copies on
the way to them now. Jimmy Connors Tennis is a title that is full of
all kinds of exciting digitized sound, one of the largest games that
we've produced to date (4 megs!). This is an excellent tennis game,
filling a niche in our line up of sports titles for the Lynx!

One of the titles that I know where anxious to get going on for the
Lynx is Eye of the Beholder. Work is progressing along with that
title, and I'm hopeful that we'll see that title in time for
Christmas. That pretty much covers all the things going on regarding
the Lynx. One of the questions that I'll be asking tonight is which
Lynx game has my son's attention, and the answer is LEMMINGS! Be sure
to pay attention when we ask that question during the RTC! You don't
have to take the Lemmings game if you can pick from any one
of the prizes available at that time!!!

On the Jaguar front, we're overwhelmed at the amount of attention that
the Atari Jaguar is garnering. Retailers and the media alike are
excited at the views that they've seen of our 64 bit home
entertainment system. As seems to be ALWAYS the case in the Atari
market, while we've projected the Jaguar to be a home entertainment
system, the rest of the world is coming up with all kinds of things
that they want to do with the Jaguar!! There has been interest in
using it as a main board in coin-operated video arcade games from a
number of companies. A number of people believe that the Jaguar has
enough power to finally be able to start the promise of Virtual
Reality. And of course, the techies among us want to know everything
about everything, why it is, how it is, and how can they get it.

I've gotten contacts from potential developers ranging from self
described "brilliant, but poor college students", and some of the
greatest names in gaming. The video game magazines are virtually
camping out on our doorstep.. I'm getting to know the people from
GamePro by their voice on the phone! <grin> For those of you that
haven't seen a lot of the information on the Atari Jaguar, please take
a look at the recent issue of Atari Explorer Online Magazine, Special
Jaguar Edition. It's here in the libraries of GEnie as file
AEO_SE_J.ZIP, and includes some GIF format pictures to give you some
screen shots from the Jaguar.

The entire staff at AEO, lead by publisher Mike Lindsay, editor Travis
Guy, and news editor Ron Kovacs have put a tremendous amount of effort
into making this a terrific resource for everyone interested in the
Jaguar. Congratulations, guys!!

For those of you that have taken the time to download and check out
the GIFs and Targa pictures from AEO, thanks for your comments!! We
will be putting out some more pictures later on, but we want to be
certain that we don't step on the toes of the game magazines by giving
away too much before they publish, either!! But rest assured there
will be more Targa files uploaded. And naturally, they will be on
GEnie, our official online service FIRST!

We're now just a few weeks away from one of my favorite events of the
year, The Southern California Atari Faire!! This year Faire
Chairperson John King Tarpinian will once again be putting on the best
fest in the West at the Glendale Civic Auditorium. GEnie will be
there, as will a host of other notables, including Bill Rehbock from
Atari. In addition to attending the show, Bill will be hosting a
developer conference held in conjunction with the Glendale Show. Be
sure to check in category 11 for the latest updates to the show vendor

Well, I think I've gone on just about long enough now! I'm really
excited to be here, and lets get started with some questions!!!! My
apologies for the typos, I got home late due to heavy traffic.

<[Graham] B.STEVAN> 1) Do you have any info yet on higher end Falcons?
2) Do you have any release dates on Atari's 14MB RAM board? 3) Does
Atari have any plans for LDW Power? 4) Do you have a name yet for the
new service manager you mentioned at the last RTC? 5) How is Atari
handling VARs right now (with regard to the Falcon)? I'd also like to
encourage Atari to contract IBM to produce the Falcon. Right now we
have to pay 3.9% duty to bring the Falcon into Canada since it is made
in Taiwan. If it could be made in the US we could avoid this duty, and
would be able to offer the Falcon at a lower price.

<BOB-BRODIE> OK, On the higher end Falcons, not at this time. As I've
said in the past, I've seen the plans, and I think you will be pleased
with what we've got in the works. Our service manager is named Jim
Jackson, and he has years of quality control and service experience. A
real first rate professional, and very famililar with dealing with
manufacturing in the Far East. Re the 14 meg boards, Sorry. I forgot
to check on that issue, but until ours is available, please use the
very excellent board from Chro- Magic Software, the Ram Gizmo. Works
great, and is a very nice product indeed. RE LDW, we're kicking around
a number of ideas with it. Our deal that we were working on with a
developer fell through, so we're looking at other options right now.
Regarding VARs we have no specific VAR program per se at this point on
the Falcon. We simply confirm that they are in fact VARs, and then we
treat them just like a normal dealer in terms of ordering, etc. I
appreciate your input on the manufacturing, we'd love to be a totally
US produced company as soon as it is practicial to do so.

<B.AEIN> Any news on the GE SOFT speed up board? Will dealers like
Toad get Jag's to sell for the holidays? Any promo deals for Falcons?
How about advertising the Jag in movie theathers with trailers? Pro
Logic surrond on Jag?

<BOB-BRODIE> Please gang...ONE question. We haven't firmed up our
plans for sales to dealers like TOAD yet but I suspect that they will
be able to purchase Jaguars after the holidays. We don't plan on
opening up mail order until after the initial roll out in NY and San
Francisco. The advertising for the Jaguar will primarily be

<P.CHAMBERLA2> We've been working on the design spec for the worlds
first and only digital signal processing, solar powered flashlight.
We want to know when we can expect to see the falcon developers kit we
ordered more than 6 weeks ago.

<BOB-BRODIE> Please send email here on GEnie to Mike-Fulton and cc
Ataridev on the mail. I don't handle developer orders, and since I'm
(for a change) doing this RTC from home rather than the office, there
isn't any way for me to check on it for you tonight in real time.
Sorry. Mike has already left the office as well, as we were having
some maintence done in the building.

<RHETT> Why should I develop for the Jaguar, when Sega and Nintendo
have shown themselves to be top-notch marketers? What can you offer
developers to tempt us away from those companies? Superior technology
doesn't always sell best, as we've seen.

<BOB-BRODIE> There are two big reasons why, Rhett. First, the real
thing that sells entertainment systems is quality software. And as a
developer, you will have more power at your disposal with the Jaguar
than with ANY OTHER SYSTEM ON THE MARKET, period!!! That means that
you will be able to create games for the home in a fashion that before
you only dreamed about being able to do. The Jaguar has the power to
make games unlike ANY of the systems that Sega and Ninetendo have. As
a developer, you also know that the price is a prime consideration of
these systems. Neo Geo had (or should I say has) a very nice system as
well, but it is simply too expensive to be a success in the home
market. We feel that the price of the Jaguar is agressive enough, and
the technology is so far advanced that we will have some of the finest
games available on the planet. While I am not familiar with your
company, and I'm not in a position to release names tonight, I can
assure you that we have some of the finest names in gaming that are
coming on board to develop for the Jaguar.

<R.HALL49> Personally, I feel that the Jaguar trounces the competition
into dust. So recently when Denny Atkin-formerly of Computes Amiga
Resource had a conf. on the Amiga Roundtable, I asked him to compare
the CD32 to the Jaguar...He replied that he thought the 2 machines
were aimed at different markets...(strange!) Anyway from the close
relationship that you have with the developers how much superior do
THEY think the Jaguar is? <BOB-BRODIE> Every developer that has seen
the system is very excited. There are admittedly "camps" in these
meetings. The bean counters tend to take a look at Atari, the company,
and question how much real support we will give the system. The
programmers and technicians can't wait to get the system in their
hands, especially after they hear that there is NO OPERATING SYSTEM to
get in their way. They get to write directly to the hardware! They all
love that!!

<K.CAVAGHAN2> Hi Bob, I know I'm going to sound like a broken record
but when could we see some (any???) ads for the present systems
including the Lynx? I haven't even seen any ads in the comics lately!

<BOB-BRODIE> Kent, we had a promotion proposed for the summer, but we
have decided to hold off and make a big push for the Lynx at the same
time as we will do the Jaguar roll out. I'm sure you will be pleased
with the ads that we will be running then. Titles are starting to come
out at a better pace, too.

<J.TORRES17> I love the LYNX and cant wait to get Lemmings (I'll have
my cousin in NY send me a Jaguar... :> ) But around here (tampa)
NOBODY seems to carry the LYNX anymore! (Toys R us, etc.) Any deals
with companies to keep the Jaguar and LYNX on the shelves. I've got
$1000 in the LYNX now. (and can't wait for Lemmings!)

<BOB-BRODIE> The Lynx is set to be back on the shelves of Electronic
Boutique very, very soon. In fact, it should have already have
happened by now. Re the Lynx/Jaguar combo, there is no question that
we will be using the Jaguar as a leverage tool to also place the Lynx
in the stores. But we also have to be mindful that the entire handheld
business is just 17% of the total video game market. So we're not
going to be shipping Lynxes in to the stores on a 1:1 basis with the
Jaguar. BTW, we haven't had a single retailer tell us they DON'T want
to do business with us on the Jaguar...they have ALL told us that they
want to sell the product.

<SAM-RAPP> Bob, I can no longer buy Lynx games here in the
Chattanooga, TN area. A Service merchandise ad I recieved today
featured the LameBoy for $44.95, on sale from $49.95. What is the
current pricing on the Lynx?

<BOB-BRODIE> The current price on the Lynx is $79.96, Sam. Like I just
told the previous questioner, you will be able to purchase them in
Electronic Boutiques again, very, very soon.

<D.ELLIS16> Thanks Bob for being here! Any word on Blackmail the voice
mail program for the Falcon? I saw a picture of the Jag in the paper..
Great Job to the entire team ! Really looking forward to seeing
production line units ;-) Thanks again!!!

<BOB-BRODIE> Dale, last I heard of Blackmail, they were awaiting the
approval of the FCC to market the program. I saw them at a conference
that I attended back in May, and they were still wrestling with that

<D.VICHA> Glad to have you here bob. With RAM prices going up, How are
Atari prices for Falcon and Jaguar going to be affected.

<BOB-BRODIE> We don't envision a change. For one thing, the increases
in RAM prices were pretty artificial anyway. There was a report that a
major factory was destroyed in an earthquake in Japan, but that turned
out to be an epoxy factory...not a chip site. So, most of the increase
has been temporary. Locally, we've been very encouraged by two events,
#1) The big, big comeback that US semiconductor companies are making
against their Asian competitors. They really are doing a great job of
getting back into the competitive standpoint. And #2) we have
benefitted from Apple's problems. As a result of their sales slump,
they have cancelled some huge orders for parts (like DRAM), which
naturally made the product available to other companies!

<ORA.TECH> Along with the push for the Jaguar, will there be any
advertising or other means of getting the word out about the Falcon?
The market needs to see a large number of units in the hands of those
other than Atari die- hards.

<BOB-BRODIE> Right now, the plan is for the Jaguar to get the big
push, and then we'll take some of the funds from the Jaguar's success
and put it toward the Falcon. The reason we have changed our mind and
gone this way is that PC sales, across the board are really poor.
There are a handful of companies that are making any money in the
hardware business right now. However, we are still committed to the
Falcon. We believe in it, and intend to support it.

<S.LAPHAM1> I'd love to upgrade my '86 vintage 1040 to a Falcon but
refuse to sell my SLM605for a big loss then spend 100's more for
another laser. Any word on being able to hook up an SLM to a Falcon
(and why were SLM owners abandoned)?

<BOB-BRODIE> Hi Scott, the interface for the SLMs has not materialized
yet. And I confess to not knowing what the problem is. Bill is just
back from Europe, and I haven't had a chance to discuss this issue
with him. The reason for the change is that we wanted to bring the
system more in line with the standards that the rest of the computing
world was using, so we eliminated the DMA port. At some point in time,
every peripheral becomes obsolete. We also did away with the floppy
disk port, which made useless every external floppy disk drive ever

<C.CASSADAY> Any news on the next batch of TT's; changes; TOS updates;
RAM configurations? (with only one question mark, that should count as
one question.

<BOB-BRODIE> I asked about this before I left the office tonight,
Chris. And I KNEW that someone would ask about this!! :) But I wasn't
able to get a definitive answer about how many, when, what, etc. I can
tell you that we're continuing to work on MultiTOS, and have another
beta rev going thru testing now. It's stable enough that it is in use
in the office. I don't have a time frame on it being released, or cost
at this point.

<AEO.MAG> Bob, AEO has received a tremendous amount of feedback from
our readers on the Jaguar Issue, and on the screenshots. (They want
more!) Many of the letters have been coming from Europe asking if and
when Atari plans to market the Jaguar over there. Do you have an
answer for these very interested (potential) customers?

<BOB-BRODIE> Hi Travis, we have plans to sell the Jaguar in the first
half of 1994 in Europe, going first to London, then Paris, and
Frankfurt with our European lanuch of the Jaguar. I've gotten a lot of
wonderful compliments about the AEO Special Jaguar Edition as well,
and I'd like to take this opportunity to say thanks for your efforts
in making this such an outstanding issue. I'm particulary grateful
that AEO is a magazine that has a balanced editorial staff, that is
such a pleasure to work with. Unlike a certain other online magazine
which is piloted by an obsessive, overbearing, vindictive, self
centered ego maniac.

<K.KOZORIZ> Any chance of a 14 meg, no HD config Falcon?

<BOB-BRODIE> Kevin, not directly from us, no. But it would be an easy
system to create by purchasing a one meg no HD Falcon, and then
installing the Chro-Magic RAM Gizmo.

<L.LOZO1> Hi bob i am a dealer in australia, i met you 2 years ago at
the vancouver atari fair. Over 6 years i have been an atari dealer. I
don't agree you can critcize apple, may be years ago you could not any
longer. The Ste was late, The TT was Late, The stacy was late, The not
book we never saw, The falcon was late, Why Should i remain an atari
dealer or anyone for that matter? P.S. what about my atari dealers
access to genie? (I've requested this for over 1 1/2 years!

<BOB-BRODIE> Hello Lucas, of course I remember meeting you, both here
at the office, and it the airport on the WAY to the Vancouver show. I
did not criticize Apple, I merely pointed out that they were
cancelling their orders for certain parts, and that had impacted the
prices of those parts.

Re your GEnie access, I gave that to you, but if you do not go in to
the dealer category at least once a month, you will automatically LOSE
that access. That is not something that we have set up, it is simply
the way that GEnie's software operates. And for the most part, the
information in the dealer topic is for US/Canadian dealers. They deal
directly with us in Sunnyvale, while you are to conduct all of your
business with our office in North Ryde. If you want back in, I'll set
you up, but all of your questions about pricing etc are going to be
referred to our office in OZ. I'm not 100% up to speed on what they're
pricing/policies are there. I believe in the last year they have
primarily focused on selling the Lynx, and have become profitable in
the process there. This is in marked contrast to most of our
subsidiaries that have operated in the red for the last several years.

//// Editor's Note: At this point a drawing was held. This part has been
//// edited out of the transcript. The winners, and their prizes were:
//// <C.CASSADAY>    Atari Works.
//// <D.SHORR>       SpeedoGDOS.
//// <C.WAWRZYNIAK>  MultiTOS.
//// <R.PERRY4>      Speedo.
//// <B.CONNOLLY1>   Lemmings.
//// <D.VICHA>       MultiTOS

<BOB-BRODIE> Congratulations to the winners!

<[Host - Lou] ST.LOU> OK back to the conference.

<E.BAIZ> Are there any CD Rom games being developed for the Jaguar?

<BOB-BRODIE> Ed, the initial games that we are working on are
cartridge products. The CD will be available next year.

<C.S.SMETON> So, Is there any chance of a keyboard attachment for the
Jaguar, so that us application devs will have something to develop
software for? ;-)

<BOB-BRODIE> Hmmmm, I'm not aware of any plans for that, Charles. But
there will be a DSP expansion port, that is envisioned as being
something that interactive media (including modems) could take
advantage of.

<[Jeff] J.WHITE99> And a gracious good evening to you, Robert. Have
you guys decided where you want the booth to end up after the San
Diego show next week?

<BOB-BRODIE> I believe that we will want it to be in Glendale, home of
the Southern California Atari Faire, version 7.0. We'll be putting it
up on the stage to showcase the Falcon, and perhaps some video tape
displays that will give the attendees a look at some of the
capabilities of the Jaguar.

<S.OLSON2> While I plan to purchase a Jaguar asap I am underwhelmed by
the targas released, will these be touched up in any way? Also what
happened to Battlezone 2000?

<BOB-BRODIE> Hi Steve, well, I'm sorry that you didn't like the pics.
We have gotten all kinds of reactions to them, like Travis from AEO
indicated earlier, including mail from Europe that was high praise for
the pics. We've also heard from some people like you that didn't care
for them. Which ones didn't you like?

<S.OLSON2> PrimariMostly the Kasumi ninja ones...they seemed bland...
especially the one with the two fighting...the title screen shot
seemed alright

<BOB-BRODIE> Ah, right. Those are very preliminary shots. Please bear
in mind that part of what gets lost in these pictures is the motion,
and of course, the sound. It really is a terrific game but I agree
that the still shots didn't do it justice. Releasing the pics was a
tough decision. A lot of people here were opposed to it, because of
the mixed reactions that we knew would occur. Especially because the
way the pics looks isn't entirely in our control. Seeing them in ST
low rez on a stock ST really doesn't do them justice. On the other
hand, on a Falcon030 in true color mode, they look terrific. They were
also previewd on a Mac, with a SuperMac video board, and they looked
terrific there too. Anyway, the pictures are not retouched in any way.
They are the real thing.

<H.HAMMOUD> Hi Bob. I joined late so I hope that this was not covered
yet. Are there any plans to hook a Falcon up to the Jag? (I think it
would produce a pretty interesting animal, don't you? :) ) Also, will
the CDrom drive work on other Atari computers?

<BOB-BRODIE> Hmmm, not directly, Hassen. It does sound like a very
interesting idea though. I'll pass that idea along. Re the CDROM, is designed to fit onto a special spot on the case of the
Jaguar, and plug into the cartridge port. And it also has a "pass
through" cartridge port to allow you to play cartrdige based games
while you have the CD Rom unit installed.

<C.WAWRZYNIAK> Thanx Lou. Hi Bob! Thanks for the prize! Will games for
the Jaguar be designed like the card type for the Lynx or a box type
of cartridge? Battery backed games are appealing. Especially for the
RPG games.

<BOB-BRODIE> Hi Chris, my're welcome! The Jaguar games
are designed to be cartridges, the idea of battery backed systems has
been discussed, and is possible.

<J.VOGH> Bob, how do you view the Nintendo/SGI system announced for
late 95? If it ever makes it to market, will the Jaguar compete and
can the Jaguar be easily upgraded so that in will blow the
Nintendo/SGI away if it ever comes to market (i.e. can the clock rate
be increased, memory expanded etc.). BTW I want Star Raiders for the
Jaguar! What type of monitor does the Jaguar RGB port work with?

<BOB-BRODIE> Hi James, well I view the Nintendo/SGI announcement as an
attempt discourage, cause fear, and place uncertaintity in the
marketplace. It isn't a real product, they haven't even signed the
agreement so far as we know. SGI is a terrific company, but they are
not known for making inexpensive systems, which is what needs to be
done for a home based system. Most of the analysts here in the Silicon
Valley have decried it as a FUD announcement...if it shows up in a few
years, they're going to be WAY WAY WAY, behind us. Not a good position
to be in.

Re the monitor, the Jaguar is incredibly versatile in the way that it
handles video. There are plans to have an accessory that will handle
composite RGB output.

<J.TORRES17> Is there an editor for SpeedoGDOS drivers & Fonts. It
doesn't seem to support my HP 500C in color mode. BTW does Works do
color pics?

<BOB-BRODIE> Joe, the fonts are a propreitary format from BitStream.
They don't produce an editor, they just make more fonts. Re the
driver...hmmmm I thought that there was a 500C driver! Works doesn't
do Color pics though at this time.

<D.KAUFMAN> MTOS v. Geneva: Comments? Opinions? Recommendations?
(Three question marks, one question.) (-; Hi, Bob from sweltering,
humid, sweaty NYC.

<BOB-BRODIE> MTOS vs. Geneva, why can use BOTH at once!
Really, my friends at Gribnif, Rick and Dan, are talented programmers
with yet another great product. From the talks that I had with Rick on
the phone, there is no reason to choose, as Geneva really replaces the
AES, not TOS.

<R.HALL49> I heard the Simarils was going to do a 65,000 color 16 bit
sound version of Ishar 2 for the Falcon...from a hardware standpoint
can the Falcon move this type of game well and are they probably using
the DSP to do it?

<BOB-BRODIE> I haven't had a chance to talk to Bill Rehbock about
this, but if they were going to do a 16 bit sound version of the game,
yes, the DSP would be the way to do it...and I think it can handle it
very well.

<D.ELLIS16> How about a comment on the production schedule for the
Jaguar roll-out. Are we still on schedule? Really looking forward to
both the Jaguar and the Falcon But have to get the money first.

<BOB-BRODIE> Yes, we are still on schedule. We have just done the
first pilot production run, and Sam Tramiel is in North Carolina to be
there as the first units come off the line. I know what you mean about
having to get the money first, the economy here in California
continues to be horrible!!!

<G.ROUSH> Why is the Falcon at the rate of 16 MHZ? Why not put in a
faster one like the rest of the competition? And how many software
companies are bringing out new programs?

<BOB-BRODIE> Gary, the reason that we used a 16Mhz 030 was because of
the way that our system works. We don't just rely on the CPU in order
to make the system work. We have an DSP chip, DMA, and FPU chip that
are all available to take the workload off of the CPU. We have in fact
discussed using a Jaguar chipset as a card for other products,
including a PC card.

<R.WHITMAN2> Will Atari be making a 24 bit (Jaguar based) graphics
card for The falcons pds???

<BOB-BRODIE> We're considering it, but we haven't committed to it yet.

<[Host - Lou] ST.LOU> Well, that wraps up our Anniversary Edition of
Dateline Atari! Many thanks to Bob and Atari Corp. for providing the
prizes. Congratulations to our lucky winners. Don't forget to send
your addresses in email to BOB-BRODIE.

Join us on Saturday, September 18 at 4 p.m. Pacific Time (7 EST, 6
CST, 5 MST) for a special Glendale RTC live from the Glendale Show.
Our guests will be Bob Brodie, Glendale Coordinator John King
Tarpinian, and ZNET/AEO writer Ron Kovacs. Goodnight everyone and
thanks for coming.

<BOB-BRODIE> Thanks for coming tonight, everyone. I'm grateful, as
always to have the opportunity to participate on this network where
the staff and system have taken a strong stance to ensure that you
have the _BEST_ of everything at your disposal to serve your computing
needs. I'm also proud to be associated with these people, both as
professionals, and friends. Be sure to read our next issue of AEO, it
will be in the libraries this weekend. Good night.


 |||   Atari Artist
 |||   By: Peter Donoso
/ | \  GEnie: EXPLORER.2

  ~   ~   ~   ~   ~   ~   ])=-=-=-=-=-=-=-=-[   ~   ~   ~   ~   ~   ~
-=-=-=-=-=-=-=-=-=-=-=-=- [  ATARI  ARTIST  ] -=-=-=-=-=-=-=-=-=-=-=-=-
  ~   ~   ~   ~   ~   ~   ])=-=-=-=-=-=-=-=)[   ~   ~   ~   ~   ~   ~

This issue features a talk with Steve Cohen of Wizztronics. We cover
some familiar ground, and then delve into a number of their upcoming
hardware enhancements for Atari ST/STe/TTs, as well as the Falcon030.
I had the pleasure of being able to talk with Steve at length in a
recent, exclusive interview, during which he shared with me details
concerning a number of Wizztronics' exciting new products. While some
of these have just recently been released, I'll also be telling you
about the soon-to-be available products which they plan to debut at
the upcoming Glendale Atari show in California, along with a brief
review of the company's current roster of quality hardware
enhancements, you'll also get a glimpse into what's on the Wizztronics
drawing board for '94. So, without further ado....

     =                                                               =
   -         -=-=-=-   [  EXTRA! EXTRA! EXTRA!  ]    -=-=-=-          -
     =                                                               =


Companies who venture into the area of hardware-based computer
enhancements often have to contend with a number of unique challenges.
Although handling the distribution of third-party products has certain
advantages, there may be faulty parts and/or assemblies, as well as
warranty and service requirements to deal with. If the original
developer is based elsewhere in the world, there's the added
frustration of contending with foreign shipment. Anticipated
feature-upgrades can sometimes meet with costly delays, and
suggestions for improvements to make the product more marketable may
meet with negative reactions and resistance from the inventor. Each of
these factors can whittle the licensing "edge" down... and then down
some more.

If both design and distribution is assumed by the same outfit, the
profit margins become potentially greater, but then, so do the risks.
Research and development costs for materials and prototypes have been
known to put a product permanently to pasture, often taking the
company with it. As Tarzan said to Jane after relaxing with his third
martini from a hard day swinging through the big primeval,
"Jshane...ish a jshungle out there!"

As the founder and principal developer of Wizztronics, Steve Cohen
knows only too well the joys and pitfalls of being both a hardware
developer and product distributor. Located in New York's Port
Jefferson section of Long Island, the company is presently headed by
Steve and his partner, senior programming engineer Joseph Rodomski.
Both men have certainly had their share of rewards and frustrations,
and though the rewards may not have all necessarily been of a
financial nature, the company continues to be responsible for
producing a number of excellent, quality ST/STe/TT/Falcon products.
And, as they often say... the best is yet to come! But first....

//// Some Background

The birth of every company shares the common proverbial beginning, "It
all started when... In keeping with that tradition, I'll ask Steve to
fill us in.

    "Well...Back in 1979 I was on my way to visiting my family when I
    became intrigued by a store sign advertising video games, so I
    pulled over to check it out.  Even though I had a strong
    electronics background, I really had little experience in
    computers at that point. Little did I realize I'd soon be closing
    that gap, though. I ended up walking out of that store with an
    Atari 800 8-bit computer, loaded with an impressive (at that time)
    16k of memory, along with a couple of video games and some
    software. Within eight months I had upgraded my machine to a
    whopping 48K, and gladly abandoned storing my data on cassette
    recorders for a 5 1/4" disk drive."

Like so many small companies, the business end of Wizztronics'
computer hardware development grew out of Steve's own personal desires
and requirements. He found himself wishing his computer had features
and capabilities beyond the manufacturer's standard factory specs, and
since neither they, nor anyone else, for that matter, could supply him
with those options... he promptly decided to design, build and install
them himself!

    "Our first product grew out of my frustration of having to put up
    with having to sit there, notching my floppies just to get the
    drive to read and write both sides of the disk. After figuring out
    all I needed to do was bypass the write-protect feature on the
    drive, I came up with the design for installing a hardware switch
    which would allow any model 810 or 1050 floppy disk drive to
    access both sides of any 5 1/4"floppy. It worked great!"

A friend convinced him to market it and, though it may have seemed at
the time like a rather small step for Wizztronics into the formidable
arena of computer hardware developers, it would prove to be a giant
step for the world of Atari users.

When Atari upgraded their operating system with the release of the
800XL, there were incompatibilities with a number of software titles.
Wizztronics solved the problem by coming out with a board that allowed
users to switch between any one of 5 operating systems, including the
original 800, the 800XL and a number of alternate software-based
operating systems as well. Its release was greeted with great
enthusiasm. People really began to take notice of Wizztronics, and the
company soon became an established name among the pantheon of Atari
8-bit developers.

Steve dabbled briefly with becoming a software developer when he
wrote his first game for the Atari 800, a jump-and-shoot-'em-up that
featured multiple screens.

    "Apart from the graphics and novelty of the game itself, the thing
    that really stood out the most in this piece of software was how
    I got the screen to scroll so smoothly! I shared a beta version
    with a few friends to get their opinion, and they were gaping in
    amazement that this smoothness was really possible on an Atari
    800! A week later I was handed a disk by another Atari user as he
    excitedly told me I had to check out this great new game that he
    just downloaded off a bulletin board. I couldn't believe it - it
    was my game! After that experience, I quickly lost all desire to
    become a commercial software developer."

When the first ST models came out, 8-bit musicians had already gotten
the jump on using MIDI in conjunction with their computers.
Wizztronics had recently released MIDIMax, their hardware MIDI In/Out
interface which they bundled with MIDI MusicSystem, a sequencing
software package licensed from a third party developer. Although the
software was simplistic by today's standards, MIDIMax turned out to be
one of the most popular 8-bit products for the company. Wizztronics
also developed an Atari 800XL 256k upgrade, which did extremely well,
and still does even to this day.

//// Developing for the 16-Bit Atari

Surprised by the continued demand for 8-bit related products,
Wizztronics coasted through the early years of ST/STe development by
supporting their 8-bit market, and started looking into doing repairs,
installations and upgrades for DOS-based computers as well. Steve was
certainly intrigued by the direction Atari was heading, and begun to
explore the possibilitiesfor developing products for Atari's family of
16-bit computers.

    "Our first ST product was Compatibility Plus ($59 - limited to
    remaining stock) a bare, unpopulated board which allowed
    a520/1040/Mega ST user the convenience of being able to install
    and toggle between any two versions of TOS 6-chip sets through the
    use of an external hardware switch. Compatibility Plus II ($99
    unpopulated, $149 with TOS 2.06 pre-installed) makes Atari's
    NewDesk desktop available to older ST users, and provides the
    additional option of being able to switch back to their original
    version of TOS in order to run older software that may not be
    compatible with the newer TOS.

    "Then we introduced Cartmaster ($199), which allows any ST/STe/TT
    and Falcon user to simultaneously connect up to four cartridges to
    their cartridge port. They can then activate any cartridge
    through a desk accessory without having to turn of and re-boot
    their computer. In response to a number of customers who wanted
    to be able to activate a specific cartridge when auto-booting the
    companion program with boot-up utilities like Super-Boot and
    X-Boot, we've just recently made four Auto-Folder programs
    available - one for activating each port.These are now on GEnie in
    the ST Utilities library.

    "Cartright ($65 assembled with enclosed case, $35 assembled
    without case or $15 for the unassembled kit) frees any over-sized
    cartridge interface - a hand scanner, sound digitizer, video
    capture cartridge, MidexPlus or Spectre GCR - from taking up extra
    desk space. It's basically a ribbon extender (10" length is
    supplied, but we've tested it successfully at 6' feet; call us for
    a price on a custom length) with a standard 40-pin male and female
    cartridge plug on either end.  You can then relocate your
    cartridge to sit on top of or behind your computer. You can even
    bury it underneath your desk, or put it on the opposite end of
    your desk, or up on a shelf! Cartright also comes in handy for
    those people who have their computer sitting on top of an external
    hard drive or power switch panel. Rather that have their cartridge
    just sitting out there in the middle of the air with no support,
    Cartright can insure that an over-sized cartridge won't end up
    with bent or broken pins."

(Editor's note: For a more detailed description and review of these
two products, please see Issue #13 - AEO_013.TXT - of Atari Explorer

    "Printer Perfect ($125) is a bi-directional hardware device which
    offers the convenience of being able to connect up to three
    printers that use the Atari ST/STe/TT/Falcon parallel port. It's
    basically an A/B/C switcher, but is totally controlled using
    software - there's no physical knobs or switches. As in
    Cartmaster, we supply an accessory, which can also be run as a
    program, along with 3 small programs for booting your computer
    with a pre-assigned port as the default. Although 1040ST/Mega
    ST/STe computers unfortunately do not have parallel ports which
    are bi-directional, the Falcon 030's parallel port  definitely is
    (we still need to check out the TT about this). This means you
    could also use Printer Perfect with up to three networked Falcons
    for enabling them to share the same printer.

    "Stowaway Professional ($19.95) is a disk labeling software
    package for printing labels on any 9 or 24-pin dot matrix printer
    written by James E. Thompsen. The next update, scheduled for
    release in the first quarter of '94, will add support for laser,
    DeskJet and PostScript printers. The tentative price for this
    release will be $44.95, and owners of the earlier versions will be
    able to upgrade for $25."

//// So, What's New?

If you're one of the growing number of proud Atari Falcon 030 owners,
congratulations! If you wanted to get the MAXED version with 14 megs
of memory for doing some serious desktop publishing or digital
multi-track recording, and found they were impossible to get (Atari's
supply of upgrade boards are presently backordered), well, wait no
longer! Now you can take your Falcon to the upper)memory ozone with
Wizztronic's Falcon Memory Upgrade board ($99 unpopulated). The board
matches Atari's dimensions, measuring 2 1/4" x 4 3/4", and you have
the same option of upgrading from a 1 meg configuration to either 4
megs or 14 megs.

Installation is a breeze for even the most faint-hearted do-it-yourselfer.
The unit comes with simple and easy to understand instructions. Simply
remove the 8 case screws and then the ten screws that attach the
shielding. Next, unplug Atari's Falcon memory module board, plug your
RAM SIMMSs onto the Wizztronics board, plug the board in and secure it
to the high-insertion force pressure-fit pin connect or, re-attach the
shielding and seal the bird back up. That's it!

Although you can get the board pre-installed with RAM, Wizztronics is
not really in the business of selling RAM. They deliberately offer the
board without RAM so that you can get the absolute best price you can
find. Of course, if you're really gun-shy when it comes to doing
anything other than tying your shoes, Wizztronics will also mount your
preferred configuration of RAM onto their board and install it in your
Falcon. The total charge consists of their current market price for
RAM (market prices for RAM go up and down constantly) plus $10 for
installation, along with the cost for shipping and insurance both
ways. Insuring your unit is a very wise precaution to take, I might

Just what kind of RAM chips can be used? Want to fill us in, Steve?

    "You can use 1-SIMM chips (72 pins) in a 1x32,(4 meg) or 4x32 (14
    meg) configuration. Alternately, you may have a friend, or know
    someone at the office with a IBM PS2 which they're about to
    upgrade with more memory, and are switching to the larger memory
    chips.  Well, tell them you'll offer to take their existing RAM
    chips off their hands, because you can also use these 1x36 or 4x36
    bit module chips as well. The board we sell comes with two pairs
    of mounted solder pads. Pre-configured for 14 megs, you can easily
    alter the board's configuration by simply using a soldering iron
    to break one of these two jumpers, which automatically
    reconfigures it to 4 megs.

    "I'd like to also point out that our board employs multi-layer
    construction - 4 layers, to be exact - as opposed to the
    traditional two-layered boards, which eliminates electrical noise,
    and we use top-quality all-gold connectors manufactured by AMP. In
    the interests of environmental concerns, we're also offering a $5
    rebate plus a refund for the cost of shipping for sending us your
    original Falcon memory board."

//// Next Up

If you're a 1040ST/STe, Mega ST/STe, TT030 or Falcon 030 owner, you
may have found yourself looking at your friends' PC towers with envy,
and wished that you could also be able to reduce the number of your
Atari components down to one case! Wouldn't it be great to finally
free up your desk space from that jungle of wires, power cables, and
varying-sized cases? One case that now stands straight up, off to the
side or, even better yet, located underneath your desk and off it
entirely!  Well... you won't have to wait much longer. What's
Wizztronics got up it's proverbial disk-sleeve, Steve?

    "Although we're still working out the final details - I'll get to
    those in a minute - we plan to offer tower cases in either grey or
    black for around $250. The present units we're thinking of using
    will be 24" tall, 8" wide and approximately 18" deep, but we may
    scale them down a bit in size. They'll have four external drive
    bays, which could ideally be used for two floppy disk drives of
    any available density, a Syquest removable media hard drive and a
    CD ROM drive, but you can use any or all of them for whatever you
    might want.

    "These cases will be able to mount ANY Atari 68XXX series
    computer's mother board, with plenty of room for expansion. Each
    unit will come with the necessary cable extensions for making your
    ports accessible from a supplied back case template, which will
    have the appropriate ST model's punch-outs to fix their port
    extensions into. The case will be able to accommodate two to three
    internal hard drives, depending on their physical size and storage
    capacity, as well as a FAX/modem, and even a Cartmaster! A 230
    watt UL-approved power supply, and a standard three-prong power
    cord will also be included.

    "The cartridge port placement (and accessability) will be
    optional. If you're a one)cartridge kind of person, and that's the
    only thing you ever use the cartridge port for, you can just plug
    it in and close up the back.  For external placement, the back of
    the case seems to make the most sense, but it can also be
    installed in the front. Alternately, using our Cartright ribbon
    extender, you can locate your cartridge port wherever you like -
    on the top of the case or on the side. If you're really handy, you
    can also probably cut a hole in the side of the case and mount it
    there, but we won't be providing a punch-out for that, and you'd
    have to work out the mechanics of securing it well enough to
    withstand the pressure of inserting and removing a cartridge. For
    those CartMaster owners who prefer to have their unit buried in
    the case, there'll be plenty of room for locating it inside as

    "The front panel will have an access light for indicating internal
    hard drive activity, as well as a front-mounted power switch,
    keyboard port and soft reset button. The available amount of
    interior space will ideally also allow for using the recently
    developed European memory expansion boards, which can bring your
    Atari 1040 ST/STe or Mega ST/STe up to a total of 12 megs of RAM.

    "Mega ST owners who are using an ADSpeed16 accelerator, or have a
    color accelerator, ATSpeed, Viking Moniterm or SoundTools card
    installed in their Megabus slot would not have the room to
    accommodate the addition of a 12 meg memory upgrade unit within
    the dimensions of their standard Mega ST case. Once relocated in
    our tower case, this would not be a problem."

Steve, that's really great news for Mega ST/STe and TT owners, since
their computers already have separate keyboards. Now, the big question
- what about Falcon and 520/1040 ST/STe owners who have their CPUs and
keyboards integrated within the same computer case?

    "Well, remember when I mentioned earlier that we're still working
    out the final details? This is one of the big challenges we have;
    being able to offer this to ANY Atari 16bit or 32bit user, which
    we really want to do. We looked at the possibility of being able
    to use the original 1040ST/STe-styled keyboards, but it looks like
    that solution may not end up being cost-effective in the end.

    "As a viable alternative, we thought of purchasing MegaSTe/TT
    keyboards from Atari to offer our 1040/Falcon customers, and we're
    still checking that out with Atari. Stock status and pricing for
    their keyboards are uncertain, so right now that option is up in
    the air. We're presently investigating the possibility of getting
    injection-molded keyboard cases made that could house the original
    1040/Falcon-style keyboard, and still be able to incorporate a
    mouse and joystick port as well...we're not quite sure yet what
    the best solution will be, but we're hard at work on getting it

//// Debuting at Glendale

Ever since Atari unleashed the Falcon030, a video-hungry user base has
waited off-camera in eager anticipation for a video editing package to
finally be released that would take full advantage of Atari's amazing
video machine. Nothing too expensive; how about, oh, let's see...  how
about less than half of what it costs on the "other" video computer,
which needs that break-the-bank, "extra-aneous pseudo-kitchen
appliance" hardware accessory to do a lot of the same video
prestidigitation? Seems too good to be true? Well, the wait is just
about over!

This September at the annual Atari Glendale show in California,
Wizztronics will unveil the first module in their total VES 2000
(Video Editing System) Prosumer package! The term "Prosumer" indicates
the unit has a number of professional features and capabilities, but
due to certain limitations, can't really be consider as a fully
professional system (they start at around $25,000!). Now that I've
drawn the curtains and cued the orchestra, I'll let Steve introduce
the cast.

    "The first part of our VES package is a VFC (video frame capture)
    unit which we're targeting at around $300. The unit is a
    cartridge-based integrated assembly which plugs into the Falcon's
    cartridge port and powered by an included UL-listed AC adaptor. It
    features a composite input via standard RCA jacks, which will make
    it compatible with any VTR (video tape recorder) or camcorder, and
    will also contain RCA composite output jacks.

    "On the technical end, the unit will have a capture rate of 20 FPS
    (frames-per-second), with a resolution of 640 by 480. The VFC then
    automatically scales this down to 320 by 200 for use with the
    Falcon's high-res, true color capabilities. This is accomplished
    using an on-board 24-bit VIM (video input module). You'll be able
    to store captured images to your hard drive, which will average
    around 600K per picture at uncompressed, high-res quality. In
    addition we've also integrated a 1 megabyte RAM buffer into our
    VFC unit to allow for fast frame buffering. The data capture rate
    is 1/60th of a second, NTSC quality, and displayed to the Falcon's
    monitor screen at the rate of 20 FPS, which is the Falcon's
    maximum limitation. This unit supports full NTSC input and output,
    as well as TBC (time-base co rrection) for syncing signal timing
    from multiple sources. This particular feature will be important
    for when we release the complete VES2000 system."

Wow! But wait, there's more. The full blown VES2000 system, which is
scheduled for a second quarter of '94 release, will offer a COMPLETE
hardware/software video editing package! It will support both consumer
AND commercial VTR units, be able to handle two input sources (a total
of three inputs with their VFC unit) which can then be mixed down to
one final output, and the software will feature live editing
capability on your Falcon monitor screen, as you're watching it on
your video monitor. Steve, tell us some of the features you're
planning to include in this system.

    "The package will include: genlocking with titling and animation
    capability; chroma keying (like they use for putting weather maps
    behind TV weather casters); luminous keying; colorization; a
    variety of fades and wipes; screen scrolling and rotation; digital
    effects; zoom in/out capabilities, as well as solarization. You'll
    be able to do such special effects, as displaying one live image
    which then can be "ghosted" to allow another image to emerge from
    behind - in real time! You'll be able to display anywhere from 3
    to 6 frames of video in linear mode - the list just goes on and

    "Commercial decks, which have servo-controlled motors for
    single-frame accuracy, will be controlled through either a RS232
    or RS422 cable directly from the Falcon, and hopefully be able
    to... [access] the bus directly for optimum
    processing speed.

    "Consumer decks will require a third-party hardware interface,
    such as Sony's "VBox" (video computer interface), which uses
    Sony's industry-standard VISCA (Video System Control Architecture)
    to generate and translate a number of protocols that interface
    with a variety of consumer-model VCRs.  These protocols include
    CONTROL-S, LAN-S and LAN-C. Sony models include their SLVR5,
    SLV676, SLV757, SLVP30HF, SLV50, SLV70HF, and Beta models
    SLHF1000, SLHF2100, EDV9300, EDV9500, but a number of companies
    support these protocols as well.

    "Basically, any VCR which has either a 5-pin DIN connector, S-3 or
    other kind of wired remote plug on the back of the unit will most
    likely qualify as being compatabile with the VBox, This will allow
    the Falcon to control such standard VTR functions as play, record,
    stop, pause, rewind and fast forward. Wizztronics, by the way,
    will be a registered Sony VISCA developer.

    "The audio aspects will take full advantage of the Falcon's DSP
    chip to handle full digital stereo as well as digital sound
    effects. This whole project is a real complicated challenge! We're
    hard at work on this package, and are looking at a host of other
    hardware and software features and capabilities as well, including
    interfacing with third-party animation software, but we'd rather
    not talk about them until we've got them worked out. Atari has
    been very helpful and supportive, and we're as excited as they are
    about showing what the Falcon030 can really do!"

The VES2000 system is slated to come in at somewhere around $2,000. At
this point it's not certain whether the VFC cartridge unit will be
incorporated into this total package, or remain a separate piece. You
will need to have 14 megs installed in your Falcon to take full
advantage of all the incredible features of this system.

This may seem like an expensive price tag at first, until you start to
do some comparison shopping. Even at a total price tag of $3,800 (14
meg Falcon with monitor included), a total PC-based package with
comparable features comes in at somewhere between $5,000 and $7,000
dollars, while an Amiga 4000 package - including a VideoToaster 4000 -
comes to about $6000!  And that doesn't include multi-track digital
audio and effects! With the upcoming official US release of Cubase
Audio for the Falcon (8 channels of digital audio without any
additional hardware) Atari's claim that you'll be able to actually
produce your own music video or commercial spot on the Falcon will
soon be a reality!

//// On the Drawing Board

Wizztronics is working on some other exciting new projects that are in
various stages of development. One of them is a Falcon video
accelerator card! Another is a memory upgrade board which will boast
handling up to an awesome 1 gigabyte of RAM! Of course, these products
will be able to integrate with the VES2000 system as well.

Steve and all the other people at Wizztronics believe in giving their
customers FULL support for any and all of their products.

    "If there's a problem, we'll stay with it until it's solved! If,
    in the unlikely event that we can't solve it, we'll be more than
    happy to give them a full refund. Our customers are important to
    us, and that's exactly how we treat them. Talk to any of our past
    customers and you'll hear the same thing: 'Wizztronics took the
    time to make sure I was totally satisfied!' We also believe in
    using only top-quality parts in all our products, for obtaining
    the best possible response and durability.

    "Wizztronics is an authorized Atari developer, as well as a
    recognized Atari repair center. We have a pretty quick turn-around
    for installing hardware and memory upgrades. We're very familiar
    with the complete line of Atari 8, 16 and 32-bit computers, and
    can help you with whatever problems you may be having."

I'd like to thank Steve Cohen for his generous time and efforts in
getting all this information together for this interview, exclusive to
AEO readers. I'm sure they share my excitement in learning about these
exciting new products and are as eagerly looking forward to their
official release as I am.

If you have any questions, you can reach Steve at:
P.O. Box 122
Port Jefferson, NY  11776

Voice/Fax (516) 473-2507

Or leave him E-mail on Genie at S.COHEN27.

Well, that's it for now. We welcome your comments, suggestions and any
interesting things you may want to see mentioned here, so feel free to
write to either of us on Genie at EXPLORER.2. Until next time, just

  -=-=-=-=- Today Is The Tomorrow You Dreamed About Yesterday. -=-=-=-=-


 |||   Houston Atari Safari '93 Report
 |||   By: Jerry Davis
/ | \  GEnie: EXPLORER.3

The fourth annual Houston Atari Safari, sponsored by the Houston Atari
Computer Enthusiasts (H.A.C.E.), was held on August 21st, 1993, at the
Jerabeck Athletic Center on the campus of the University of St. Thomas
in Houston, Texas. As has been the case with most other Atari shows
recently, attendance this year was down sharply from previous years.
But, the mood of those attending the show did not appear to be
dampened by the low turnout.

The H.A.C.E. members put a lot of time, and effort into this year's
show, and their hard work was evident from registration to show's end.
H.A.C.E. President George Iken, Treasurer Bill Kithias, and the other
members manned the registration table throughout the day, distributing
the Safari packs, and making sure everyone got their name tags and
were registered for the many door prizes given away during the show.

Disk Librarians Bruce Fudge and Harold Gailey were busy passing out
free disks and selling compilations of PD and Shareware files from the
huge H.A.C.E. library. Other members were scurrying about attending to
the needs of the different vendors and people who came for the show.
This show seemed to be very well organized, and the members of
H.A.C.E. are to be commended on a job well done.

The hall and the meeting rooms in the Jerabeck Athletic Center
provided a comfortable and relaxing atmosphere for this year's Safari.
Although there were no local dealers present, two retail dealers from
outside the Houston area, several individuals with swap tables, and
eight different developers were on hand to answer questions, offer
upgrades, and sell their products. I believe most of the tables did a
fair amount of business. I saw many smiling people leaving the show
with new purchases in hand.

There was a good deal of excitement for many, seeing a Falcon030
closeup for the first time. Most of the developers had at least one
Falcon030 on hand to demonstrate their products. This idea worked,
because the tables garnered a lot of attention as interested show
goers checked out the demonstrations while actually getting a chance
to use a Falcon030.

The lack of a local dealer was disappointing to many, in the fact that
there were no Falcon030's for sale at the show. I spoke to several
people who had come to the show planning to buy one. There were rumors
of the arrival of a new Atari dealer in the Houston area in the coming
weeks. This will hopefully give the folks in Houston a quality dealer
to fulfill their needs.

One of the stalwart developers of software for the Atari, Codehead
Technologies, was represented by Tomas Ensley. Tomas had a Falcon030
with a VGA monitor demonstrating MIDI Spy, the background MIDI file
player/recorder and the 030 version of Warp 9's EOS screen saver.

In addition to answering questions and putting up with some good
natured ribbing from myself and others, Tomas stayed busy selling
copies of the ever expanding line of software available from the
Codeheads. Of special interest were Image Copy II, a new product that
allows you to view and convert many different types of graphics on any
ST, TT, or Falcon030 and DigiTape, a digital audio recording/editing
package for the Falcon030.

James Collins, of Chro-Magic Software Innovations, spent the day
showing Guitaristics and Pianistics, two computer-assisted instruction
tools for beginner or professional guitarists and pianists. Mr.
Collins reminded me that software updates are now available for those
who purchased Guitaristics when it was being distributed by Dr. T's

James also displayed an open Falcon030 showing Chro-Magic's new RAM
Gizmo, a unique solderless RAM expansion board for the Falcon030 that
makes use of standard SIMM modules. I must say it was impressive to
see the innards of the mighty Falcon, with the upgrade board tucked
neatly in place. With a list price of $99, this little board should
prove to be popular for those looking to upgrade the memory in their

The amiable S.K. Webb of SKWare exhibited the many features of Seurat
Version 2.80. In this relaxed setting, I saw several different people
putting Mr. Webb's excellent drawing program through it's paces. This
latest version is fully TT030 and Falcon030 compatible.

Offering many new features, Seurat now allows you to enlarge, reduce,
or re-proportion both B&W and Color images. A bundled package
featuring Seurat v 2.8, Color Scan, a utility that converts scanned
grey scale images to Color pictures, and other graphics utilities was
being offered at a special show price. This package is also available
via mail order, direct from SKWARE.

Linda Peckham of Electronic Spinster Graphics, presented a wealth of
DTP graphics, and offered some great package deals for those attending
the show. I noticed a considerable amount of interest in their new
selection of Vector Graphics. Available in CVG, GEM/3, and EPS
formats, these graphics are ready to import into your favorite DTP

The lone TT030 at the show was located at the DMC table. With a large
screen monitor, Mario Georgiou exposed some of the many features of
Calamus. As with wares offered by the other developers, special show
prices were in effect for Calamus, Invision Elite, Outline Art, and
other fine DTP products offered by DMC.

Barefoot Software Inc. CEO Jeffrey Naideau and Product Specialist Dana
Byrd gave some very impressive demonstrations of SmpteTrack and
EditTrack Platinum MIDI sequencing software. Their usual array of MIDI
tools, GenEdit, a new version of EZ-Score Plus, and Take Control Music
DTP were prominently displayed also.

On the cutting edge of Atari/MIDI capabilities, Barefoot announced the
availability of AudioTrack Platinum, a new version of the EditTrack
series of sequencers. When run on an Atari Falcon030 with D2D System's
direct-to-hard-disk software, it allows MIDI sequencing along with
playback and recording of hard disk audio files. In combination with
their proprietary hardware, AudioTrack and the hard disk
recording/playback can both sync to the same SMPTE signal.

In addition to working the Barefoot table throughout the day, Jeff
conducted an informal and educational demonstration of EditTrack in
one of the adjoining classrooms. Those attending the demonstration
seemed to be genuinely impressed. Jeff's willingness to answer even
the most absurd questions was refreshing.

Keith Gerdes of Trace Technologies was exhibiting his familiar Data
Diet and Data Rescue. Squish II, the newest version of Keith's
executable file compression program was being displayed too. Keith was
also handling sales of Craig Harvey's EdHack, the edit anything
accessory from, Clear Thinking Software.

One of the busiest folks at this years Safari had to be Damien Jones
of DMJ software. Fairly new to the arena of American Atari developers,
Damien has generated a lot of interest from the Atari community
lately. His appearance at the Safari proved to be no different.

Damien's View II, being distributed by It's All Relative, is a program
that replaces the Atari desktop's show routines. Once View II is
installed, you can display text files, picture files, animations, play
digitized sounds, and display or extract ARC and LZH files. The
different viewers are completely configurable and offer many features.

In closing, I would like to thank my good friend and fellow Atari
die-hard Jim Ashly for convincing me to make the trip to this year's
show. I also appreciate him putting up with my incessant ravings and
running count of the many Bar-B-Que stands between Lubbock and

The folks at H.A.C.E. are some of the friendliest you'll ever meet,
and I did enjoy their hospitality. I know that the low turnout will
cause some concern when planning next year's show.  One alternative I
heard suggested, was to combine the efforts of the surviving user
groups in Texas into one big show at a central location in the state.
Regardless of where or how next year's show materializes, if H.A.C.E.
is involved, it will be a winner!


--       --==--==--       GEnie Sign-Up Information      --==--==--      --
--                                                                       --
--   1. Set your communications software for half duplex (local echo)    --
--   at 300, 1200, or 2400 baud.                                         --
--                                                                       --
--   2.  Dial toll free: 1-800-638-8369 (or in Canada, 1-800-387-8330).  --
--   Upon connection, enter HHH.                                         --
--                                                                       --
--   3.  At the U# prompt, enter XTX99436,GENIE then press <Return>.     --
--                                                                       --
--   4.  Have a major credit card ready.  In the U.S., you may also use  --
--   your checking account number.                                       --
--                                                                       --
--   For more information in the United States or Canada, call 1-800-    --
--   638-9636 or write: GEnie, c/o GE Information Services, P.O. Box     --
--   6403, Rockville, MD 20850-1785.                                     --
--                                                                       --
--       --==--==--  Atari's Official Online Resource!  --==--==--       --


 |||   AEO Calendar of Events
 |||   Compiled by: Ron Kovacs
/ | \  GEnie: Z-NET      CIS: 75300,1642      Delphi: ZNET

//// Fairbanks Atari Expo                             September 4, 1993

The Fairbanks Atari Users Group will be holding a computer exhibition
on Saturday the 4th of September at the Ft. Wainwright post library.
The show will begin at 12:00 and go till 5:00 pm. Purple Mountain
Computers from Bellevue Washington will be there as well as Far North
Computers.  The user group will have a booth demonstrating some MIDI
software and answering questions. If you have questions regarding the
show or the area, please call 907-356-9835.

////  The Glendale Show                           September 18-19, 1993

The Glendale Show, Version 7.0, The Legend Continues...

The show will be held Saturday and Sunday, September 18-19, 1993 at
the Glendale Civic Auditorium, 1041 N. Verdugo Road, Glendale, CA.
Hours are 10:00 am to 6:00 pm on Saturday and 10:00 am to 4:00 pm on

General Admission is $5.00 per person. If you plan on attending and
you live outside of Southern California you may get FREE admission by
sending a self-address-stamped-#10 envelope (the long one) to
H.A.C.K.S., 249 N. Brand Bl. #321, Glendale, CA 91203 and get TWO one
day passes.

For those of you who will be needing lodging we have made arrangements
with the New Red Lion Hotel in Glendale. Regular rates are $129.00 per
night but if you mention ATARI/HACKS you will get a room for $79.00
per night, single or double occupancy. Reservations may be made by
calling the Red Lion at 818-956-5466. The hotel has a free shuttle
from the Burbank Airport. The guaranteed reservation cut-off date is
August 28th. If you are quoted another rate ask for Janet Waldie in

Atari will be doing something very special in conjunction with this
year's show. Details to come.

If you have any questions send mail to:

 H.A.C.K.S., 249 N.  Brand Bl. #321, Glendale, CA 91203

or leave GEmail to JOHN.KING.T or call John King Tarpinian at
818-246-7276 before 9 pm PDT.

Exhibitors List:

Oregon Research
Clear Thinking
Branch Always
Steve's Software for Safari Fonts
J&J Computers
A&D (ST Informer)
Toad Computers for Straight FAX!
Best Electronics
J.V. Enterprises
The Computer Network
Fast Technology
Fair Dinkum

////  MacWorld Expo                               September 20-22, 1993

The third MacWorld Expo, titled Canada '93 at the Metro Toronto
Convention Centre, sponsored by MacWorld Magazine.

////  Mobile World Expo                           September 21-23, 1993

Mobile World Expo and Conference at the San Jose Convention Center in
San Jose California.

////  Unix Expo '93                               September 21-23, 1993

Unix Expo '93 in New York City, New York at the Javits Convention

////  Image World                                     October 4-8, 1993

Image World New York, Javits Convention Center, New York City.

////  NetWorld '93                                    October 5-7, 1993

NetWorld 93, Dallas Convention Center, Dallas TX.

////  Lap & Palmtop Expo                              October 7-8, 1993

Lap & Palmtop Mobile Computing Expo at the Chicago Mart/Expo Center
in Chicago, Illinois. Exhibitors will show the latest in mobile
computing, software, pen, peripherals and communications from the
industry's leading manufacturers. In conjunction with the exhibits is
the Mobile Systems Solutions Conference series. Featuring over 80
leading industry experts speakers, the conference provides vital
information needed to build or improve your world of mobile computing.

////  PC Expo                                       October 19-21, 1993

PC Expo-Chicago, McCormick Place East, Chicago IL.

////  CD-ROM Expo                                   October 27-29, 1993

CD-ROM Exposition at the World Trade Center, Boston MA.

////  EDA&T Asia '93                                October 27-29, 1993

EDA&T Asia '93.  The Electronic Design and Test Conference Exhibition
at the Taipei International Convention Center in Taiwan.  Exhibit space
is still available.  For more information contact: Betsy Donahue,
Chicago, Fax: 708-475-2794.

////  November 1-3, 1993

Online/CD-ROM '93, Washington  DC.

////  GeoCon/93                                     November 7-10, 1993

GeoCon/93, an international conference and showcase for software
products developed outside the U.S. at the Royal Sonesta Hotel,
Cambridge, Mass. The conference program will include three days of
workshops on topics of interest to overseas developers entering the
U.S. market. Workshop presenters will discuss such issues as how to
negotiate distribution and licensing contracts, setting up a business
in  the U.S., manufacturing and fulfillment, technical support,
packaging, research sources, and how to market through direct,
retail, and catalog channels. For additional information, contact Tom
Stitt, associate publisher, Soft letter, 17 Main St., Watertown, Mass.
02272-9154; Telephone 617-924-3944; Fax 617-924-7288, or Colleen
O'Shea, director, Soft letter Europe, 2 um Bierg, 7641 Chirstnach,
Luxembourg, Telephone: 35.2.87119; Fax: 35.2.87048.

////  COMDEX                                       November 15-19, 1993

COMDEX Fall '93. Las Vegas Nevada.

////  Mobile '94                                       March 6-10, 1994

Mobile '94 Conference and Exposition at the San Jose Convention Center.

////  SAC Expo 94                                     March 12-13, 1994

S.T.A.R (formerly known as SST) proudly announces SAC Expo 94. The
second annual Sacramento Atari Computer Exposition will be held
Saturday and Sunday at the Towe Ford Museum: 2200 Front Street,
Sacramento, California 95818. The Towe Ford Museum was so excited
about the '93 show that they allocated nearly double the space in the
museum for SAC Expo 94. STAR will be mailing vendor packets by
September, if you are a vendor and did not receive a packet for SAC
Expo 93, please contact us so you will not be missed this year. Look
for future press releases containing more details, vendor lists, and
show information. For more information contact STAR at P.O. Box
214892, Sacramento, CA 95821-0892.

////  GEC '94                                           June 4-11, 1994

GEC '94, Milam ITALY.  Centrexpo, Sheila Palka/Delia Associates, PO Box
338, Route 22 West, Whitehouse, NJ 08888; (800) 524-2193, (908)
534-6856  (Fax).

If you have an event you would like to include on the AEO Calender of
Events, please send email via GEnie to Z-NET, CompuServe 75300,1642, or
via FNET to node 593 or AtariNet node 51:1/13.0. International shows
also covered.


 |||   Delphi's World of Games' Atari Jaguar RTC
 |||   Courtesy: Delphi
/ | \  -----------------------------------------------------------------

On August 25, 1993, a formal Atari conference was held on the Delphi
information service (e-mail to VIDGAMES@DELPHI.COM or
VIDGAMES@NETCOM.COM for signup info). The conference was held to spread
info on the recently announced Atari Jaguar game system. Moderating was
Andy Eddy, former Executive Editor for VideoGames & Computer
Entertainment magazine. Guests were Sam Tramiel, president of Atari,
and Bob Brodie, Atari's director of communcations.

After a lengthy delay of nearly 20 minutes while chaos reigned due to a
temporary bug in Delphi's conference software, the CO started and
attendees got to ask questions of Atari's execs. What follows is a *very*
edited transcript of the questions and answers. The list of attendees
were compiled from /WHO lists taken during the CO and in the
post-formal chatter that followed; apologies to those I may have
forgotten. (This "post-war" CO is in an accompanying file, for those
who are interested.)

Comments to my e-mailboxes, save your flames...

Andy Eddy
71333,3664 on CompuServe


Formal Atari CO attendees:

  Okay, before we start, I'll apologize for the problems. I think
  Delphi...  has a software bug.

  I'd like to start by welcoming everyone here tonight. Special thanks
  to Sam Tramiel and Bob Brodie of Atari for taking time out of their
  very busy schedule to answer some questions for us here. Finally,
  I'd like

  .... let's <attempt> to be patient and virtueous..... :):):)

  to welcome any of the Internet crowd for coming by Delphi this
  evening.  I hope you like the system and will join us again.

  As an introduction, you all know that Atari announced the Jaguar
  last Wednesday in a press event at its Sunnyvale offices. Before the
  event, there was skepticism, and since there has been lots of
  speculation. Atari has thrown the gauntlet at 3DO, and tonight Sam
  and Bob will be sharing with you what makes this product so

  Finally, the Jaguar has sparked a flurry of heated debate. With
  that in mind, I'll set the law right now: NO SHENANAGANS (whatever
  they are) WILL BE TOLERATED! We're doing this conference as an
  effort to spread vital game information to the public, and
  disruptions make that impossible.  This is a formal conference, and
  if you don't know the rules for how a formal CO works, you are asked
  to exit the Conference area (/EX twice) and re-read the banner that
  greets you upon entrance. Not abiding will put you in the
  "audience." Thanks in advance for your cooperation.

  Now, while those of you with questions will signal with a ?
  (remember, only one per customer), we'll start by asking Sam and/or
  Bob to open with a statement, then get to the conference...

  Bob and/or Sam? Comment to start?

  Good evening everyone.  On behalf of Atari Corporation, I'd like to
  thank you all for attending tonight's conference.  We appreciate the
  opportunity to meet here with you, especially with our good friend
  Andy Eddy!  Andy has been a long time supporter of Atari Corp., even
  preceding his involvement here in the World of Games Forum on
  Delphi, and we're thankful for his long-term support of our company.

  Tonight, we are here to talk to you about the Atari Jaguar, our
  exciting new 64 bit interactive multimedia entertainment system.
  For those of you that haven't seen the specs on the Jaguar yet, here
  they are:

  o   64-bit RISC-based multiprocessing architecture.

  o   A very high speed 106.4 Mbyte/sec 64-bit Data path.

  o   27 MIPs Graphic Processor with 4K bytes of zero wait-state
  internal SRAM that is closely coupled with the Blitter that can
  perform a full range of graphics effects (including shading and
  rotations) at high speed yet is programmable for maximum

  o   A programmable Object Processor that can act as a variety of
  different video architectures, such as an advanced sprite engine,
  pixel-mapped based systems, character mapped based systems and many

  o   27 MIPs Digital Signal Processor with 8K bytes of zero
  wait-state internal SRAM for CD quality sound and full stereo

  o   A Blitter that can perform a full range of logical operations at
  high speed with hardware support for Z-buffering and Gouraud

  o   MC68000 CPU clocked at 13.3 MHz as a general purpose control

  o   Lifelike quality 32-bit color on NTSC or PAL television screens,
  yielding greater than 16 million colors.

  o   ROM Cartridge capacity to 48 Megabits of compressed or
  uncompressed code. When compressed, equivalent to almost 400

  o   16 Megabits of fast page-mode DRAM.

  o   An optional double speed CD-ROM drive.

  o   ComLynx I/O for networked multiconsole games.

  o   Two (expandable to literally dozens) enhanced Controller Ports,
  supporting digital and analog interfaces, as well as keyboards,
  lightguns and mice.

  o   High performance, ergonomically designed, Controller with
  Joypad, 3 firebuttons, Pause, Option, and 12-key keypad with
  game-specific overlays.

  o   High speed synchronous serial port for connection to modems,
  cable TV networks and other high performance networks.

  With this Fall's introduction of the Atari Jaguar, the ultimate
  video game system and the nation's first 64-bit interactive
  multimedia entertainment system, comes a plethora of both new and
  familiar game titles. While third party developers and publishers
  are actively designing software for the system, Atari programmers
  overseas and domestically have been developing and fine-tuning
  several titles for the Jaguar for release this year.

  The dramatic use of 3D rendering and 24-bit graphics is most
  prevalent in games seen on the Jaguar system. Scanned and digitized
  character images, as well as detailed texture mapping, lighting and
  shadowing effects and unrestricted motion and speed all contribute
  to the next level of technology apparent in these games. And the
  16-bit stereo capabilities and high fidelity CD quality sound
  combined with the imagery produce extraordinary results.

  Some of the upcoming game titles include:

  Crescent Galaxy - Lifelike three dimensionally rendered and shadowed
  planetary objects and lifeforms prevail in this multi-leveled side
  shooter. You are the young Corporal Trevor McFur of the Circle
  Reserve Core. Returning from a deep space reconnaissance mission,
  you and your shipmate intercept a long-range transmission telling
  you that you are the only hope in saving the galaxy against a
  ruthless creature. The game is visually stunning with full textured
  3D renderings of creatures and planets with nine levels reflecting
  five different worlds. Enemies and allies include: Pop-up Poppies
  which explode when they sense an enemy nearby; Geysers which can
  spurt forth abrupt blasts of nuclear steam erupting from the Planets
  core; and bothersome creatures such as Skeletal Vultures, Scorpions
  and Flying Dinos and dozens more.

  Cybermorph - Surreal landscapes colored in both muted and bright
  tones are the background for this One-Man Rescue Probe sent into an
  interplanetary battlefield to rescue stranded survivors of a dying
  war. The Cybermorph is an adaptable, flexible machine with an outer
  skin programmed to react to its environment. If accelerating, it
  grows streamlined to reduce resistance; when banking, its wings
  extend to give maximum turn; when slowing up, the rear of the craft
  morphs into a cowl to bring the speed down quickly and smoothly. The
  probe flies in a full three dimensional world environment. The
  object is to fly over the surface of each world in a low-altitude,
  high speed craft saving helpless survivors and avoiding surface and
  air attack and alien infestation. You defend yourself by shooting
  anything that moves and avoid being hit yourself or colliding into
  tall landscape features. A holographic face speaks to you giving you
  information.  Following lifeline sensors, you race toward the cries
  for help, saving survivors from all 50 moons to complete the

  Raiden - As the ultimate arcade game conversion, the Jaguar version
  is considered the ideal soundalike and lookalike Raiden game. As a
  vertical scroller, you control aircraft flying over enemy territory,
  shooting militaristic tanks and aircraft, avoiding enemy gun fire
  and hidden missiles. This full-featured game makes use of the
  graphic capabilities with complex parallax scrolling and realistic
  and engaging audio quality. This was essentially developed as a
  yardstick for performance, color and sprite comparisons to showcase
  the Jaguar's capabilities. Speed and motion are exceptional with no
  slow down when mass objects are present on the screen. No other
  system comes close to accurately converting this arcade game to a
  home console.

  Evolution-Dino Dudes - Familiar to consumers as Dinolympics? on the
  Lynx or as Humans? on the PC, this title is an Atari-owned property
  which, seen on the Jaguar, utilizes all the graphics and colors
  Jaguar can represent. Vivid colors and creative use of animation
  facilities enhance the overall look of the game, but the 80 levels
  of play make this challenging as well. As a platform puzzle game,
  cavemen characters are taught to survive, by avoiding man-eating
  dinosaurs, discovering the spear, making fire and physically
  running, jumping and climbing their way up the evolutionary ladder.

  Club Drive - The most exciting vacation park in the 21st century is
  the theme for this pulse quickening excursion. At this fantasy
  driving resort, all vehicles are indestructible, and visitors can
  challenge their skills and courage by driving some of the most
  treacherous terrain and returning completely unscathed. Different
  levels are represented by a futuristic city, an old western town, a
  present day world and even a toy car world where you can drive in
  and around your furniture at breakneck speeds as if you were inside
  a toy racing car.  This true 3D polygon environment is completely
  new to the gaming world.

  Checkered Flag II - Jaguar Formula One Racing hits its peak with
  this version using real-time 3D generated action, akin to arcade
  quality racing games. Cars, buildings and roads are rendered in true
  3D, with options to customize your car. The game features 100% true
  sound effects; crashes are realistic in both sound and imagery, with
  parts flying and tires screeching. Racing speed is markedly

  Tiny Toon Adventures - Based on the popular Warner Bros. characters,
  this platform game utilizes the vibrant colors and graphics to the
  utmost. The storyline follows Buster Bunny, Babs Bunny and Plucky
  Duck as they embark on a rescue mission to save the planet Aurica.
  Bad boy Montana Max has a new toy: an Acme TiToonium-Gold Converter.
  The only place to get TiToonium is on the planet Aurica. The removal
  of TiToonium is causing grave ecological damage to Aurica. Armed
  with Acme Crazy Net, our heroes try to shut down the Acme
  TiToonium-Gold Converter. The object is to navigate through each
  level, locate the TiToonium Extractor within each level and pull the
  plug on it. With a transport beam pad, one of our heroes can be
  selected to climb, jump and run through each level so in the end,
  the planet can be saved.

  Alien vs. Predator - Based on two 20th Century Fox feature film
  blockbusters, what would happen if the Alien, the Predator and a
  colonial Marine Corporal were put together? Who would win? You
  select who you will portray and the qualities each possesses is
  incorporated into your strategy. For instance, if you were the
  Alien, you could climb walls; as the Predator, your night vision is
  superior and as the Marine Corporal, you may be able to outwit the
  other two with your computer skills. Placed in realistic texture
  mapped corridors, your movement is put in real-time action. Camera
  speeds race as you're being chased down hallways with a high frame
  rate. Exceptional colors and shadow effects put you right into the

  Kasumi Ninja - The game is set on the small island of Kasumi in the
  West Pacific rim. The Kasumi Ninja are the world's finest Ninja
  warriors and a mist of invisibility from the Ninja Gods hides Kasumi
  from the world. Kasumi is undetectable, even by radar. The Gods have
  decided to intervene when Gyaku, a strong warrior, kills his family
  and the Gods must find a new strong warrior to battle him. But
  first, this new young Ninja must learn new skills and fight with
  nine other persona, each with unique martial arts abilities and
  special moves.  The game incorporates superior graphics and
  animation with realistic landscapes and backgrounds. Ninja warriors
  utilize 91 different martial arts movements, with all the sound
  effects and audio consistent with this type of fighting.

  Tempest 2000 - This title is familiar to gamers as the favorite
  arcade classic using vector graphics, polygons and rapid fire. Here,
  the Jaguar version incorporates a starfield in the background
  instead of just a black background. CD quality stereo enhances this
  game tenfold as this fast-paced energetic game unfolds. Manipulative
  abilities have been modernized and updated with new features that
  include spins and twists not seen in the 80's, as well as an updated
  version to the year 2000 which takes full advantage of the Jaguar's
  3D graphic polygon capabilities.

  We're very pleased with the reception that the Atari Jaguar has been
  getting from the media, especially the gaming publications!  We
  recently had a media day, where we showed off the Jaguar and it's
  spectacular effects to a standing room audience.  The reception was
  overwhelming, and to say the least, we're gratified!!

  Our plans for the rollout of the Jaguar are for a New York and San
  Francisco release in October, with the rest of the US to follow in
  1994.  From the US, we'll be expanding into Europe, with London,
  Paris, and Frankfurt as the major target cities.

  With that, I thank you for your attention, and we're now happy to
  take any questions that our audience might have, Andy!

  Whew, nice to have *someone* prepared (hehe). Okay, first question..
  honor go to AEOMAG.

  Sorry for some of the formatting...  ga, Tim

  OK, can you give a benchmark (maybe aska programmer?) on how fast
  the polygons are?  texturemapped and flat shaded.?  ga

  Tim, this is a bit more technical than I had expected, and I don't
  want to hazard a guess. I'll get back to you on that, hopefully
  later on tonight.  Sorry. ga

  Follow up, Tim?

  no, that was my question.

  Tim, please be sure to send me email on who the people that are
  interested in VR are, we'll be happy to talk to them.


  Okay, on to PHUNKZIP.

  the Jag may have a 64 bit Graphics processor, but isn't it really
  16 bit machine because of the 68000 CPU?

  Tim, we can render 50 million goroud shaded pixels a second.  Hope
  that benchmark helps.

  yes it does.

  No, the 68000 is a co processor.  And it shares only the lower
  sixteen bits of the 64 bit system bus.

  It's a similar situation to the 16 bit ISA bus that you still get
  in 32 bit PCs.  ga

  so what chip is the CPU of the Jag?

  Side comment: Isn't it also true that a processor in the Jaguar can
  be moved...  from its "main" usage (like the graphics processor) to
  another task if you chose to?

  The Jaguar CPU is a 64 bit custom graphics chip.

  last question from me: how can a graphics chip be the CPU?

  The 64 bit custom graphics chip is a good general purpose RISC
  unit, but it has been specifically optimized for 3D graphics work.

  ok thanks

  Okay, thanks, Dave. Josh, you're up.

  Thanks, Andy!  Guys, I'm one of those that felt a bit "burned" by
  the...  promises of third-party LYNX support, that basically never
  materialized...  so I'd like to know which 3rd-party publishers have
  definitely been...  developing for the Jaguar.  GA.

  We at Atari made no promises of 3rd party publishers for the Lynx.
  And we are working very hard to attract 3rd party publishers to
  Jaguar.  We will make our first formal announcements as to who has
  signed up in September.  ga

  Follow-up, Josh?

  Ah. Okee-dokee. :-(  Yes, one follow-up...
  As you said, you're planning a test market release in October in NY
  and SF...  and I'm wondering when in 1994 you're planning the
  national rollout.  GA.

  The NY and SF markets will be shipped product in November and the
  rest of the national rollout will occur in the first quarter of '94

  Okay, thanks. RJUNG, you are up. GA

  Hmmmm...OK, thanks!  Andy, back to you!

  Hi, guys. Two questions, sorry if this is against protocol. (1)
  What game comes with the Jaguar? (2) How does the Lynx/Jag/ComLynx
  connection work?  Are you talkingh about Lynx and Jag versions of a
  title, a Lynx adaptor, But there are no gasmes planned to be on both
  the Lynx and Jaguar platforms?

  We have not decided which game will be packed out.  It will be a
  surprise.  :)  The ComLynx connection is a not a Lynx compatible
  adapter.  The Jaguar will not play Lynx titles.  What the ComLynx
  port will allow, is for software to be developed to allow Lynxes to
  be part of a Jaguar game as controllers.  ga

  All right. Thanks. GA.

  We're not sure what you mean, but we do plan to have some of the
  same titles on both platforms.

  Okay, WUNDERLEYS is up. Go ahead with your question.

  Ok, first off, what is the CD tht you were talking about?  Is it a
  CD-ROM or something?

  (If you already signaled with a ?, please don't send another one.
  It's confusing. Thanks.)

  Ok, and for my final question....  Will you have Fighting games?

  We are planning a CD peripheral to be introduced during the 1st
  half of 1994.  It can play CD audio, CD+Graphics, and of course,
  Jaguar CD software.  It's a high performance double speed drive And
  will allow for full motion video in the Jaguar software.

  Will you have fighting games?  What basis of games are you going to
  stick to releasing?  ga

  Side question: How much will the MPEG 2 option cost?

  by using compression techniques called "Cine Pak".

  Bob/Sam, did you get the question about fighting games?


  Ok, thanx!  I'm finished! GA

  Sorry, there was a question about fighting games. I thought that
  was..  still being answered.

  Of course, we will have a fighting game of all sorts.  Man against
  man, man against animal, animal against animal, Aliens against
  Predators, just like we said in our opening remarks. <grin>  We are
  planning on having all types of games, and hope that 3rd party
  publishers will add a long list of titles.

  Andy, we are not annoucing prices at present.

  (hehe) Okay, ARNOLDB. Fire away.

  What language is native game code writen in?


  does the console have hardware scaling and rotating of individual

  That was easy enough. Follow-up?

  Yes, and lots more besides.

  how many megabits will the average game be

  Again, easy. DAVHEBEL, you are on.

  and what phisical size are they?

  Have you considered contacting Beyond Games about porting Battle
  wheels from the Lynx to the jag ?

  asembly as in 68000 chip or that graphics chip?

  Let's move on to Dave's question so that everyone else has a
  chance. Thanks.  (We still have about 20 people with questions in

  You cannot compare the megabit size of Jaguar carts to Sega Gensis,
  and SNES.  As Jaguar can compress data much more efficently and
  decompress on the fly.  The general amount of uncompressed data will
  be far larger than anything seen on Genesis and SNES.

  I'd like to start by welcoming everyone here tonight. Special thanks
  to Sam Tramiel and Bob Brodie of Atari for taking time out of their

  True Color graphics and CD quality stereo sound take up a lot of data.
  Regarding Beyond Games, of course we are talking to them.  And as I said
  earlier, we'll announce publishers in mid September.


  thanks ga

  Follow-up, Dave?

  Arnie: ALL the processors are programmed in Assembly.

  no thanks!

  Okay, Gene5320 is up. Go ahead with your question.

  Followup on the 3rd party question.  3rd partys do make the machine,
  look at what Street Fighter II did for SNES.   My question, will
  Atari put the Jaguar on "Tour" (like malls) to show it off and allow
  hands on with it?  ga oops..  redo?

  Good question.

  We are planning heavy duty marketing support, and will have point of
  purchase demostration units available at stores.  At present, we
  don't plan "a tour", but might in the future.  ga

  Follow up, Gene?

  all done

  Okay, JONSEI is in the spotlight.

  Basically same as josho above: How many 3P's and who. Do you
  anticipate 3P support at launch? Are development systems available.?

  We will have 3rd party publishers developing software at launch. As
  a matter of fact, they are working on software as we speak.  They
  will not be shipping until Q-1. And yes, development systems are of
  course available.  ga

  Okay, follow-up, JONSEI?

  no. GA.

  Okay, let's see if TELENUT is here...
  Nope, on to ATARIPOWER7.

  Why the timdity in getting the product out, what with the resources
  IBM has, surely we could have things in full blast already even!
  Bestest and mostest is great, add fastest, and!!!!
  GA followed by  another !?  <3 DOn't, ATARI DOES! :):):).... >
  Sorry, I was almost finished retyping into my text editor... :)

  We are limited by the amount of custom chips we can get this year.
  1994 we should not have these limitations.  ga

  Great, follow up, ATARIPOWER7?

  I'll wait in line for the next time....

  IBM really does have tremendous manufacturing power. And we really
  do agree that 3DO, don't, and Jaguar Does!

  Fair is fair!

  All right... SAM_RAPP. You are up.

SAM_RAPP:Sam 030>
  Hi Guys!  Thanks for being here!  Thanks for all the wonderful toys!

  (Thanks, ATARIPOWER7)

SAM_RAPP:Sam 030>
  I hear that there are several development systems for the Jaguar,
  such as TT, PC, and a stand alone system.  Could you briefly
  describe the development environment and list the features of each
  system?  GA

  This question is very complicated, but basically we have a TT
  development environment, and a PC development environment.  You can
  use any machine you want for art development.  Of course, you should
  use Atari's for music work.

SAM_RAPP:Sam 030>
  One more thing...  Will you mailorder this year for us Die hards?

  All we have time for is three more questions, sorry.

  Okay, let's move to EELIAS.

  Will the Jaguar be modem ready or cable ready?

  We do not have a formal reply to this, but we will consider the
  mail order option.


  Again, if you are talking about the new, or yet to be available OR
  clearly define {interactive networks}, we do think that Jaguar can
  act as a set top in this environment. ga

  We'll skip follow-ups so we can get as many people in as possible.

  Thanks. ga

  RDIMICK... you are on.

  Will you be bringing any of the Atari coin ops to the jaguar ? -
  And can you please arrange for some of the initial Jaguars to be
  sold here on Delphi - there has to be a way!!!!  please

  Yes, some of the coin op titles will be on Jaguar.  And I already
  answered regarding Mail order. We appreciate your enthusiasm... :)

  Okay, EFLY. Go ahead with your question.

  Could you run the preliminary information again.  I was late.
  Perhaps on the way out.

  It will be in the transcript. I'll have it up in a day or so.
  Another question?

  We'll have a transcript for the library later.

  (I'll save Bob and Sam from repeating all that.)

  no thanks.

  Okay, Geoff. You can go.

  Go on to the next person while I get my question ready.

  I think they are about out of time. How much more, Bob/Sam?

  One more, Andy.

  Okay, if Geoff isn't quite ready, Telenut is back and hopefully can.

  I'm ready.


  As a person who was disappointed in the way the lynx turned out to
  be a pretende the Jag to show us that it is a contender?

  Oops. GA Dave.

  How do you see the Jaguar as bieng supiror to the 3DO.  As far as
  overall quality.

  We feel that the power of the Jaguar will allow for a quantum leap
  in software experiences.  And we will back this with serious
  marketing dollars.  The Lynx is not dead, and we will advertise it
  in NY and San Francisco along with Jaguar.  There will be 12 new
  Lynx titles delivered this year.

  Trip Hawkins referred to the Jaguar as the "Betamax" to 3DO's "VHS."
  Any comment?

  Do you think you can compete with the bulk of software for the 3DO?
  (sorry, that was my follow-up)

  Andy, look at the prices, the 3DO is not priced to be a consumer
  product at well over $500.  3DO is simply overpriced.

  Understand. Unless Bob and Sam can take anymore questions, I'll put
  a close...  to the formal part of the CO. Closing comments, Bob and
  Sam?  And, again, sorry for the glitches that delayed the start.

  Thank you all for attending.  On behalf of Atari, we're very
  grateful for your interest in the Jaguar.  We'll be seeing you in
  the message bases here on Delphi.  Please feel to send e-mail to
  BOBBRO here on Delphi, my normal address. Goodnight!

  Kick some butt guys! :)


  Okay, the transcript will be up in short order, I hope. Thanks one
  and...  all for attending. E-mail to VIDGAMES with comments on the
  CO and future CO...  guests.


--       --==--==--      Delphi Sign-Up Information      --==--==--      --
--                                                                       --
--  To enroll as a Delphi subscriber, modem call 1-800-365-4636. Press   --
--  [Return] once or twice, and type IP26 [Return] at Password:          --
--                                                                       --
--  Answer all of the questions, and you'll be cleared for Delphi        --
--  access in a few days. If you have questions about Delphi services,   --
--  give a voice call to Delphi Member Services at 1-800-544-4005.       --
--                                                                       --
--       --==--==--      Delphi Sign-Up Information      --==--==--      --


 |||   Atari Asylum
 |||   By: Gregg Anderson
/ | \  GEnie: AEO.7

Hi there and welcome back. Have you met my room-mate yet? No? Well
then; Atari Fanatic meet Napoleon.... Napoleon, meet Atari Fanatic....
Of course he's not really Napoleon, he just thinks he is. He's a
little bit crazy don't you know. How can I be so sure of that?
Easy.... I'M NAPOLEON!!!! You wanna go conquer the world?

Meanwhile, back at the ranch.... Welcome to an unusual Asylum my
friends. This one will be shorter than the last one (really, I mean
it this time) and may be the last one for a few issues. Why? Because
I'm going to be out of town for the next few weeks and, temporarily at
least, Atariless. Hopefully they'll save my room here at the Asylum
and I'll be back on the electronic pages of AEO in September.

This issue is basically an expansion on the ScreenBlaster review from
last issue. After C.G. Haines (HAINES) sent us his review I was able
to get my hands on a SBlaster myself <yea!> and ran over a week's
worth of tests on it with one of Computer STudio's Falcon systems.
This issue is an expansion of HAINES' excellent review and will,
hopefully, help the Falcon owners out there gain a better
understanding of what the SBlaster is capable of in addition to how
well it works.

First, as HAINES pointed out, the SBlaster is capable of greatly
expanding the Falcon's available screen resolutions. Rather than just
the (already excellent) standard 640 x 480 VGA or 320 x 240 TrueColor
modes, the SBlaster provides a huge range of resolutions. What are
they? Well, the following list is a PARTIAL compilation of what is
available on a Blasted Falcon.

First; The number and type of resolution available is dependent on
the type of monitor you're using. If it's a base single-frequency VGA
unit then your options are somewhat limited when compared to a
high-dollar SuperVGA MultiScan. As a rule, the better the monitor
(i.e., the wider the horizontal and vertical frequency range) the
greater the number of usable higher-resolution displays.

Second; the following list is NOT all inclusive! Depending on the
monitor used there will be variations in the available resolutions.

Finally; This list is additive. Say what? That means that as you move
from base to better VGA monitors you have access to not only the
better resolutions the more expensive monitors offer but the
resolutions available in the less capable units as well. Though there
are a few exceptions (a few resolutions dropped, others added) this
rule stays pretty solid. Therefore, when looking to see what YOU can
expect to have available on your monitor you first need to look for
the monitor in this list with vertical and horizontal frequencies
closest to your unit. Then look BACKWARDS to the less capable monitors
IN THE SAME COLOR RANGE and see what other resolutions should be
available to you in addition to the list under your monitor.

By the way, when you see "31Khz" listed but have a 31.5Khz unit don't
worry about it. There is more than enough "slop" built into monitors
that 31Khz will accept 30-32 (or more) with no problems. The same goes
for the 35Khz listing, that will usually handle 35.2 and 35.5 Khz
sweeps as well.

            Available Falcon ScreenBlaster VGA Resolutions:
            --Note: * indicates an INTERLACED video mode--
                           Base VGA Monitor
                (60, 70 Hz Vertical, 31Khz Horizontal)

  256 Color Mode                 16 Color Mode
   RES    V    H                 RES     V    H
672x496-60.0 31.5              672x496-60.0 31.5
896x512-60.4 32.0              752x432-70.4 31.9
                               864x512-59.6 31.9
                              1072x512-59.6 31.7
                              1120x672-88.4 31.5*
                              1280x624-93.2 31.4*

    4 Color Mode                 2 Color Mode
  RES      V     H               RES    V    H
 672x496-59.4 31.2             672x496-59.4 31.2
 896x496-60.3 31.3             896x432-70.5 31.6
1152x504-60.8 31.9             896x496-60.4 31.4


                              TriSync VGA
               (60, 70 Vertical, 31, 35Khz Horizontal)

  256 Color Mode                 16 Color Mode
   RES    V    H                 RES     V    H

640x480-70.0 31.5              640x480-70.0 35.4
768x576-60.0 35.7             1024x560-60.6 35.5
896x512-60.4 32.0             1024x768-88.8 35.6*
                              1280x960-63.1 31.4*

    4 Color Mode                  2 Color Mode
   RES     V     H               RES     V     H
 640x480-70.0 35.4             640x480-71.4 35.8
 736x544-62.1 35.0             896x480-71.1 35.3
1024x560-60.6 35.5            1280x960-62.3 31.2*
1280x960-62.9 31.3


                               Super VGA
             (60, 70 Vertical, 31, 35, 38Khz Horizontal)

  256 Color Mode                16 Color Mode
  RES     V    H                RES     V    H

704x512-71.6 38.2              768x576-64.0 38.3
704x528-70.0 38.2
720x544-66.3 38.3

    4 Color Mode                 2 Color Mode
   RES     V    H               RES     V    H

 800x608-61.0 38.1              704x528-69.0 38.0
1024x528-69.8 38.1             1120x604-62.0 38.0


           (60, 70 Vertical, 31, 35, 38, 48Khz Horizontal)

  256 Color Mode               16 Color Mode
RES     V    H                 RES     V    H

                               880x656-68.3 47.3

     4 Color Mode              2 Color Mode
   RES     V    H              RES     V    H

 800x608-75.3 47.3             832x624-73.7 48.1
 832x624-71.9 47.3


                             VGA MultiScan
                  (60-80 Vertical, 31-60 Horizontal)

  256 Color Mode                 16 Color Mode
   RES    V    H                 RES     V    H

640x480-77.5 40.6              640x480-75.2 39.5
720x512-70.5 37.6              764x528-70.0 38.3
736x560-62.3 36.6              720x512-69.7 37.1
800x608-55.1 34.4              720x544-72.5 41.1
800x608-92.4 30.0*             736x544-70.0 39.6
880x656-92.1 31.8*             752x560-73.5 43.1
944x720-78.7 29.2*             768x576-73.1 43.9
                               800x608-66.2 41.8
                               800x608-72.5 46.0
                               832x624-70.0 45.6
                               880x608-67.3 42.5
                               880x565-68.3 47.3
                              1024x656-61.4 41.9
                              1152x832-86.0 37.2*

   4 Color Mode                   2 Color Mode
  RES     V    H                 RES     V    H

640x480-74.5 39.1              640x480-77.7 39.5
704x528-63.3 36.3              736x544-70.3 39.8
704x528-73.4 40.2              768x576-72.0 43.5
736x544-68.6 38.8              800x608-64.1 40.7
736x560-66.7 38.8              800x608-68.0 43.2
768x576-69.7 41.7              800x608-76.8 48.8
800x608-63.4 40.3              880x656-68.4 47.3
800x608-63.4 40.3
800x608-70.4 45.3
800x608-71.4 44.6


                    SVGA MultiScan (Overscan 1701)
                  (31-68 Horizontal, 55-90 Vertical)

  256 Color Mode                      16 Color Mode
  RES     V    H                      RES     V    H

896x512-60.4 32.0                   704x528-70.0 38.3
                                   1024x768-85.2 34.1*
                                   1152x656-86.0 37.2*

    4 Color Mode                       2 Color Mode
   RES     V    H                     RES     V    H
 800x608-61.0 38.1                  832x624-73.7 48.1
 896x496-60.3 31.3


Also included in the installed Driver utility (used to tell SBlaster
what type of monitor to expect) are the AOC 337 (30-60 Hz horizontal,
50-90 vertical) and the EIZO T560 (30-78 horizontal, 55-90 vertical),
the various Atari ST monitors, a TT color monitor, an Amiga monitor
(?), and a GENLOCK system. And YES, with the newest software upgrade
the ScreenBlaster offers expanded video resolutions on the older Atari
ST monitors.

Sorry, but I wasn't able to do a lot of in-depth testing in the
expanded True Color modes. I can, however, say that the SBlaster DOES
offer a lot more usable room in TC. Graphics that on a standard
Falcon030 had to be scrolled around a TruePaint "full screen" display
to see all of it now have obvious black borders around them. So yes,
SBlaster DOES GOOD THINGS for the TrueColor mode.

I have to make the same apology about the standard "interlaced" modes
the Falcon030 uses on the older ST monitors and TV sets. I had to
limit my testing to the VGA mode due to lack of time and layout.

Ok, first some bad news. The ScreenBlaster WILL NOT give you a full
screen, Non-Interlaced 1024 x 768 or 1280 x 960. Sorry, but even with
the SBlaster maxxed out with a top-of-the-line monitor these modes are
beyond what the Falcon's internal hardware can generate. The Falcon's
video bandwidth just isn't wide enough to handle that much data fast
enough to generate those resolutions. At least not yet <grin>.
However, you CAN access them in an interlaced mode on most monitors.
While you can't avoid the flicker in 1280 x 960 (it's pretty obvious)
you can use that resolution if you really need it. The 1024 x 768
mode, on the other hand, is VERY usable despite being interlaced. On
the shop's TriSync the interlaced 1024 x 768 is displayed with an 88.8
Hz (44.4 Hz effective) vertical refresh. At that speed the flicker is
quite acceptable for almost any application.

By the way, the faster the vertical refresh the more solid the display
will appear to the user and the weaker the "flicker" will seem.
That's why a 50 Hz, non-interlaced, refresh rate seems more "flicker
prone" than a 60 or 70 Hz rate. The same is true with an interlaced
display, the faster the rate the better the display. The Horizontal
Sweep rate also benefits from higher frequencies. The faster the
horizontal sweep rate, the brighter and clearer the display will
look. In all cases, interlaced or not, always try to use the fastest
Vertical and/or Horizontal frequencies available.

//// A Word of Caution

ALL VGA, SVGA, and MultiSync monitors expect either a specific
frequency or a pre-programmed series of frequencies from the
computer's video system. While the Falcon/ScreenBlaster combination is
able to produce several VGA/SVGA/EVGA resolutions it does so at (for
the most part) very non-standard frequencies. Because of this, and
depending on the monitor being used, the display may appear misplaced
on the screen and/or over or under-sized. Though this doesn't happen
in all the available resolutions it happens often enough to qualify as
a minor annoyance. Fixing it is usually a simple combination of the
monitor's vertical/horizontal size/position controls and the supplied
CPX. Even better are the newer Multisyncs that "remember" frequencies
and screen positions (NECs, MAGs, etc).

It's also possible to display a resolution that has a "loop around" on
the left or right edge of the screen. This will be obvious when the
mouse is moved past the edge of the screen and a faint "ghost cursor"
can be seen moving to the left (or right) while the mouse continues
moving right (or left). So what do you do? First you try to resize and
recenter the display with the monitor's controls. I suggest keeping
the display as wide as possible without killing the aspect ratio.
then, as HAINES mentioned last issue, use the supplied .CPX to help
center the display on the monitor. If these fail try changing the
vertical/horizontal polarities with the .CPX. If all these fail to
give you a usable display then you may be trying to use the wrong
monitor driver with the SBlaster. At that point your choices are to
go in and select a less powerful monitor and reboot or just learn not
to use this specific display.

If you're shopping for a monitor be sure to find one with a wide range
of adjustment in the Vertical/Horizontal Size/Position controls. The
same goes for multisyncs, try for the most flexible you can afford
with the widest range of horizontal and vertical frequencies.

//// Aspect Ratio??? What the Heck's That?

Most computer systems, and the Falcon & TT are no exception, output a
fairly standard sized display. The vast majority offer at least one of
the following resolutions: 640 x 480, 800 x 600, 1024 x 768, 1280 x
960 (or 1280 x 1024). All these are measured in pixels by the way.
What do all these displays have in common? Their Aspect Ratio is the
same; that the ratio of their width (640, 768, 800, 1024, or 1280) to
their height (480, 576, 600, 768, or 960) remains at a fairly constant
1.33333333. As long as this ratio is maintained then the GEM desktop
will look normal and circles will always look round and squares will
have even sides.

Why do I bring this up? Because many (indeed, most) of the SBlaster's
display modes have a very different aspect ratio than what most of us
think of as "normal." While small variations in this aspect ratio are
acceptable for most applications, any major alteration will cause
serious problems when working on CAD, Drafting, or DTP software.

A good rule of thumb, to see if the display mode you want to use is
close to having the right aspect ratio, is to multiply the HORIZONTAL
size by 0.75 and compare the result with the listed VERTICAL
resolution. If they match then the aspect ratio is good. If they're
close then you should be able to adjust the monitor to get a good
round circle. If they're way off though then you may want to think
about using a different resolution, unless you're just doing word
processing in which case any ratio less than 2 to 1 should be ok.

Watch for the SBlaster's time out though. While the initial "BootUp"
Set Resolution Screen will wait forever while you make up your mind,
there seems to be a default "time out" on subsequent res changes that
will automatically select a default display unless you use to cursor
to change the setting right away. Once moved it seems to disable the
timer so you can take your time deciding on the resolution you want to

Does it make a difference in overall feel? Darn right! After working
with the ScreenBlaster, going back to the Falcon030's native 640 x 480
mode is like going back to a MegaST after working with the Falcon.
You can't shake the feeling that something important is missing, even
when you know what it is <grin>. Seriously, while not all of the
Blaster's resolutions are really usable (or needed) on all monitors,
the ones that are usable (both interlaced and non-interlaced) are a
MAJOR improvement! In fact, with the Blaster the Falcon's graphics are
almost as much a step up from the base Falcon as the base Falcon is
over the standard STe system.

//// About Compatibility

What about compatibility? Well folks, "There's good news tonight!" The
Falcon/SBlaster combination is amazingly compatible, at least with all
the productivity software I was able to test it with. Granted that's
not a really huge pile of software (I can't afford to buy everything
on the market) but it's a solid indicator that most everything else
should handle the SBlaster with no problems.

y EZDraw, in most resolutions anyway, is very compatible. There are
some resolutions, as on the TT with a video card, that EZDraw confuses
with the old ST-Low resolution and refuses to load. Otherwise it
"looks Mahvolus" (with apologies to Billy Crystal).

y True Paint, no problems that I could see and it was a positive
pleasure to be able to see the ENTIRE picture in the "full page" view
mode. Shoot, most of them ended up with obvious borders around the

y FirstWord Plus, very usable and just as fast as the standard modes.
Having an 11 to 14" wide page took some getting used to though as did
having almost an entire page showing from top to bottom.

y Speed of Light, very compatible in all the 256 & 16 color modes I
was able to test it in. There were a lot of .GIF files that were much
larger than I expected and I was able to see ALL of them for the first
time in the 800 x 608 and 1024 x 768 (which works GREAT for color
graphics) modes.

y CalamusSL; what can I say? Fully compatible and able to show a LOT
more of your document. The 1024 x 768 mode is a good compromise
between interlace flicker and an almost full page display. The 1280 x
960 is a full page display but not recommended for regular use.

y Atari Works, fantastic! Readable, responsive, and just a pleasure
all the way around to use with the Blaster. Imagine, having multiple,
readable, and usable documents open on the same page!

y Atari-Supplied Falcon software. So far, no problems noted.

Some of the tested software included the Falcon's screen saver, which
not only works with the ScreenBlaster but does so better than on a
base bird. SpeedoGDOS is also very Blaster friendly and, if it loads
before MultiTOS, the Blaster is MTOS friendly as well.

A small list? Maybe, but very indicative of what to expect in the way
of productivity compatibility; almost perfect!

Of course not everything will be compatible, but the exceptions were
pretty much what we expected, games and demos. I found some of the
more popular graphics demos have problems with the the SBlaster. Most
of them appear to have been written expecting a PRE-SET 640 x 480
resolution or were put together with the assumption that they would
never have to cope with a non-standard display. This problem is NOT
limited to the SBlaster of course, it also applies to the ST, STe, and
TT as well. Blaim the authors on this one folks. Even the outstanding
English Falcon Demo now being used by Atari dealers nation-wide fall
into this class. But then, if you try to start it in the wrong Falcon
video mode it has the same problem.

Games? Sorry folks, but the Blaster isn't going to be anymore
compatible with games than the Falcon itself. As one of COMPO's reps
mentioned, software just can't make "assumptions" about the video
system like they used to in the old ST Low/Med/High days. ANY program
that "assumes" it will have to deal with a single display mode is
almost guaranteed to break on the Falcon, let alone a SBlaster, and
games are historically "assumption" prone.

In short, if the program was written correctly (i.e., resolution
independent) then it should run in the Falcon's native mode and in the
expanded Blaster modes. The vast majority of productivity software
follows the rules (though, sad to say, there are always exceptions)
and should be fully SBlaster compatible. This is especially true of
any new "Falcon Compatible" packages now coming out.

//// Performance/Speed

Sorry folks, this time I'm not going to list tons of numbers and test
results. I've caught more than a little flack for my love of testing
and numbers so I'm going to just give you a few glittering
generalities and observations.

All of the resolutions I was able to test were generally within 10% or
so of the same test running on a base Falcon. With so little impact
any loss caused by the ScreenBlaster's overhead should be easily fixed
by NVDI and/or Warp 9. The Blaster's 640 x 480 modes are actually
slightly faster the Falcon's 640 x 480 native mode (due, I suspect, to
their faster vertical and horizontal frequencies). A surprise was that
the 800 x 608 and 1024 x 768 modes test out only slightly slower than
a stock Falcon. Even more surprising was that the GEM Dialog tests
actually turned out to be faster than stock. 1280 x 960 and similar
modes? Ok, here they slow down some, to around 1/2 or less the TT
numbers, but not as bad as expected and still quite usable (except for
the flicker).

//// Monitor Size & Display Modes:

y 1280 x 960... FORGET IT, at least on a 14" monitor. If the flicker
doesn't kill you the terminal squint will. That text is TINY! Use this
display only as a conversation piece unless you're working with a 17"
monitor, and be ready for a fairly slow refresh rate and some rather
obvious interlace.

y 1024 x 768... Usable if tight on a 14" monitor. Depending on the
mode selected the interlace is not too bad (watch out for two- color
grey scales though). Be sure to pick the highest vertical refresh
speed possible. Once again, the faster this is the less noticeable the
interlace flicker is. The 1024 x 768 at 88.8 Hz is very solid if not
totally immune from the flicker. Better still it has the correct
aspect ratio so no monitor adjustment is needed. As I said, its usable
but tight on a 14" monitor, better on a 15" unit, and great on a
16-17" beast.

y 800 x 608... GREAT!!!!!!! Rock solid, non-interlaced, and a dream to
use on a 14" or 15" monitor. What can I say? This is the most flexible
and easy to use resolution in the package. The base 768 x 576 mode is
close enough to 800 x 600 that the aspect ratio is perfectly
acceptable. Sadly, this resolution is not available on all monitors.
The combination of vertical and horizontal frequencies needed for 800
x 600 are right on the "cusp" of what most monitors are capable of
handling (remember what I said about having to use non- standard
frequencies on the Falcon?). You'll need a fairly good SVGA MultiSync
to use a true 800 x 608 and a really good monitor can offer several
varieties of 800 x 600. Again, the 768 x 576 mode available on 35 Khz
VGA monitors is VERY close to the 800 x 600 and maintains the correct
aspect ratio.

y 640 x 480... SHARP!!!!!!! Though the same basic resolution as a
standard Falcon, the Blaster's mode has a higher vertical and
horizontal rate, this makes the display much brighter and even more
solid. You'll need to expand the display with the monitor's controls
a bit though as the higher frequencies make for a slightly smaller
display "window."

//// Needed

Ok, so nothing's perfect. What else would I like to see available on
the ScreenBlaster? How about:

A) A Custom Monitor Driver Kit! There are a LOT of monitors available
here in the US that do not exactly match the supplied monitor drivers.
Unless COMPO plans on releasing a complete list of monitors soon (an
almost impossible task given all the units out there) I'd like to see
a "build it yourself" kit included in the package. Dangerous? No more
so than selecting the wrong monitor from the supplied list. There's
nothing in the system to prevent your using a base VGA monitor and
telling the ScreenBlaster it's talking to a SVGA MultiSync.... But
please avoid this unless you're into watching black screens and smoke
curling up from the back of your monitor. This is a slight
exaggeration of course, there's little danger of actually frying your
VGA monitor with an "out of range" frequency. Still, it's a good idea
to avoid over-taxing your monitor in any event. Finally: NEVER custom-
wire an older SC or SM Atari monitor and tell the Falcon/Blaster to
output a VGA signal (or visa-versa). Otherwise you WILL see that smoke
I joked about earlier.

I'd be really curious to see how the SBlaster would work configured
for one of the new "Hyper' VGA multiscan monitors. Why? Because these
units offer greatly expanded flexibility over the earlier units with a
much wider range of vertical and horizontal frequencies. As an
example, the top vertical refresh offered by the SBlaster"s supplied
monitor drivers is 90Hz, yet some monitors can support a 120Hz refresh
rate. 17" Super-Monitor Examples

                 KFC CA-1726    MAG Innovision MX17f   ViewSonic V17
             (out of production)
Max Resolution:  1280 x 1024(NI)   1280 x 1024(NI)     1600 x 1280(NI)
Vertical:        50-100 Hz         50-120 Hz           50-120 Hz
Horizontal:      30-75  Khz        30-68  Khz          30-82  Khz
Bandwidth:        135   MHZ         120   Mhz           135   Mhz
Dot Pitch:       .26               .26                 .27
MSRP:           $950              $1499               $1299

Generally speaking, the larger (wider) the bandwidth the better.
While this can be important to vital on "high end" systems and
graphics workstations it's much less important on the Falcon which
wasn't designed to produce such wide signal bandwidths. Look for
anything over 65 Mhz as your bottom line.

B) A display of the exact resolution and mode you're in would be
handy. Either on call from a "hot key" or showing on the .CPX panel
that comes with the SBlaster. Currently, the only way to verify your
resolution is to reset it with the "SET VIDEO," a rather difficult
thing to do inside a program.

C) A smaller ScreenBlaster adapter would also be nice. Now we're
really picking nits. The present SBlaster is only about the size and
shape of an old Zippo lighter so it really isn't all that large.
However, once installed between the Falcon and the Atari VGA (or RGB)
video adapter you have the better part of a five inch bar sticking
out back there. This can cause some major interference with the layout
of your computer, monitor, and what-have-you. You can work around it
but it can be annoying at times.

//// Closing the Doors

Well, there you have it. My final thoughts on the ScreenBlaster? If
you've got a Falcon, you NEED the ScreenBlaster. It takes up where
Atari left off on the Bird's video system and does so at a very
reasonable price. While VERY compatible (I've yet to find anything
productivity related that didn't work with it) you can easily disable
it for those rare games and older utilities that can't handle the
SBlaster's higher resolutions.

Make it short and sweet? Ok: Got a Falcon? Get Blasted!

So until they leave my cell door unlocked again and I can wander
around the grounds without my everpresent keeper, take care and enjoy
your new Falcons. You know, this may turn out to be a very good year
for us after all.


 |||   The Unabashed Atariophile
 |||   By: Michael R. Burkley
/ | \  GEnie: AEO.4      Delphi: MRBURKLEY

Sometimes there is such a thing as too much success (not often, but
sometimes!). This week the church I serve had its Vacation Bible
School program. For the past 18 or so years we've had it in the
morning and early in July. This year, to make it more accessible to
working adults we decided to have it in mid-August and in the evening.
We were expecting about about 50 children and adults to attend. We've
had a hundred or more each night. Yikes! All of the teachers are
thanking me for asking them to teach this year! {grin}. Even so we all
are having a good time and learning a lot.

I'm very pleased to see what is happening Atari-wise these past few
weeks. I hear more and more about the Falcon (I hope to see one
someday!); Atari has just unveiled the Jaguar (amazing specs and power
there!), and the PD software production rate is still burgeoning. In
fact, I think things are getting to be a little too successful around
here! This week's article has only about 1/2 of the files I've
downloaded (which seems to be about average). I haven't included the
rest simply because I haven't had time to describe them all. It's
getting to be overwhelming! Just this past week a person sent me 26
disks (820K format) full of animations (and some other files) which I
had never seen before. And since I've seen practically everything for
the ST, that's saying something! But... don't slow down! Keep on
sharing your creations with us all! Here they are....

y ACCOUNT is Accountant v.1 by Mindbomb Developments (dated Aug.
1993). This is a TripLinK! FEDBBS utility that will display TripLinK!
users account information onscreen. Accountant will display for you
the useful information you want displayed, and not the "junk" you
don't want. It does it in its own unique and interesting way! At least
STE compatible. Docs included.

y AFMAJCOM is a series of six .IMG scans of Air Force logos/shields.
They are of: the Air Combat Command; the Air Force Special Operations;
the Air Mobility Command,; the Air Training Command; the Pacific Air
forces, and the U.S. Air Forces in Europe. All are very nicely done.

y AMP_DEMO is a demo of the Atari MIDI Processor v.2.0 by Steven
Lashower (dated July 31, 1993). This is said to be a very easy to use,
powerful, step-entry sequencer for use with all ST--Falcon computers
that can be used as a stand-alone step-entry program or in conjuntion
with any sequencer that can load and save standard MIDI files.
Actually, this demo is just a Jukebox demo that allows you to play
(over your MIDI keyboard or synth) five classical music files which
are included. This demo contains online docs that tell you in detail
the capabilities of AMP. I like the care with which this demo has been
set up. The functions are clearly seen and described and easily
accessed. ST medium or high rez only. 134K uncompressed.

y ANIMAL by Sol Guber is a DynaCadd font that is made up of about 60
animals. I assume that it's excellent (since most, if not all, of his
other efforts are!), but I don't have DynaCadd to check it out.

y ANIMALS is a series of nine very nicely done 300 dpi .IMG scans of
cartoon animals. There is a picture of a bear taking a picture, a
show-off bee, a very sad (and drunk) bloodhound pouring a drink (and
missing the cup!), a very proud lion and his three cubs, a cow
carrying a mop and bucket, an owl using an overhead projector (and
getting the transparency upside down!), a chipmunk using a portable TV
camera, a dinosaur skating, and a fox in a spacesuit reading a repair
manual with screwdriver in hand (and looking rather alarmed!). These
are all nice pictures.

y AW_CHECK by Michael Herbert (dated August 1, 1993) is a the
AtariWorks Check Register. This is a set of AtariWorks Spreadsheet and
Database templates designed to aid in the creation and maintenance of
a simple cash accounting system for home or small business use. A
tutorial is included which will get you started. The author states
that this is a work in progress but useable as it stands. Requires
AtariWorks from Atari (which I don't have which means I can't give you
a first-hand review of this).

y AW_FONTS by Michael Herbert is an AtariWorks document (.STW) that
will allow you to quickly view the appearance of various Bitstream
Speedo fonts in three sizes and the attributes that SpeedoGDOS
supports. Just load this file into AtariWorks, select the font you
wish to preview and read all about "The quick brown fox jump[ing] over
the lazy dog's back." Docs included.

y AW_FRAME is a series of twelve GEM frames created by Michael Hebert
for use in AtariWorks by Atari. They come as an AtariWorks document
(.STW) from which you cut and paste as you need. The author says that
they were created to meet the need for something a bit more complex
than the simple boxes and ellipses that can be drawn using the tools
in AtariWorks word processor. Unfortunately, since I don't have AW I
can't tell you what these frames look like! Oh well, someday! 140K+

y AW_INV is a template for Atari Works by Michael Herbert that will
allow you to create a useful invoice form for your business. It is set
up for the author's security electronics business, but with just a few
changes you can customize it for your own situation. Docs included.

y AW_SCPBK is the AtariWorks Scrapbook by Michael Hebert (dated August
7, 1993). This is a series of three blank templates for creating your
own scrapbooks in Atariworks as well as two AW documents (.STW), one
of which contains instructions for making and using scrapbooks and the
other which is a sample scrapbook volume containing 26 decorative
"initial" capitals (capital letters used at the beginning of
paragraphs or pages) known as the "Morris" capitals. 146K

y The Brain Damage Demo by Aggression is a graphics, animation, and
sound demo that I like very much. It begins with a person's head
splitting apart from a shock of internal light (yeah, I know, gross,
but...) and moves rapidly on to a series of excellent pictures,
animations and sounds that kept me looking. It comes on two .MSA files
(840K and 837K!) which you will need to reconstitute (I would suggest
MSA_2_32-- see below).

y BIRDY is a self-running animation of a walking bird created for
Atari France by Brainstorm (also in France). It is designed for the
Falcon, but this file may also run on other computers with high rez
graphic cards. I'll let you figure out the KEY to ESCAPE this
animation. Unfortunately, I can't run this on my lowly STE so I can't
tell you anything else about it (except that it uncompresses to 1.18

y CERTFONT is a file by Michael Herbert that is a three-page file for
Atari Works (.STW) that contains certificate phrase templates for a
"Certificate of Appreciation", a "Certificate of Completion," an
"Employee of the Month," a "Student of the Month" and a "funky" seal
(the author's words!). The typefaces used are Black Chancery, Helena
(Old English clone), Becker Medium (aka Rudelsberg) and Goudy
Handtooled (these are not Speedo fonts, but originally came from
Outline Art and converted to the GEM3 format using Arabeque [from
Gribnif] and then imported into Atari Works). Just fill in the
appropriate names and you're off! Docs concerning their use are

y CHEATER is The Cheaters Digest v.1.3s from PjH Publishing in the UK.
You can't download this file any more, and if you have it I hope you
will erase part of it! This file contains an excellent series of
"Cheats" in 1st Word format for many popular games. If you register
you will get a file that contains cheats for far more games. This file
also contains FCopy 3, and excellent disk copier and formatter, the
games Bellum, Blaster, FireStorm, and Nova (all excellent, and
recommended). But this file also contains the complete version of 1ST
Word v.1.06. That's what you should delete if you downloaded this
file. 1st Word is not, and never has been, freely distributable
(according to Mike Fulton of Atari Corp.). For some time it was
included with the first STs, but never as a public domain program.
It's too bad they went ahead and included it in this archive. They
also copied Jeff Minter's (the author of Llamatron and more) shareware
description/story without giving any credit (that I found). I don't
think they were consciously pirating 1ST Word (since they recommend
that you go out and buy 1ST Word Plus), but this shouldn't be
distributed anyway.

y CIVI_AP7 is a saved Civilization (from Microprose) game file by AP7
on Delphi (If you remember AP7 is the guy who is getting a lot of
programs from Germany through Jens - this file though, if his very
own). Beginning in 4000 B.C. he develops a game that conquers the
world! I suspect that if you have "Civilization then you will
thoroughly enjoy this game file. I especially was amused to see the
names of active "Delphians" crop up in the game file.

y COILS by Everett Wells is a simple .FLM animation created with
Cybersculpt and Phoenix Object Render. In order to view this you need
an ST--Falcon with extended res. The animation is rendered in 640 by
480 dots on screen with 256 colors. I imagine that this animation is
of moving coils! Requires Phoenix to view. 451K uncompressed.

y CONFIG is a utility for (some of) you Falcon users out there. It
will allow you to change the Falcon030's desktop language and keyboard
layout independently of each other. This might prove useful for
multi-lingual people who like to use a different language on their
desktop (to keep in practice if for no other reason). It might also
prove useful for programmers who wish to test their program for use in
other countries. From Atari Benelux.

y DATALITE is a press release from Oregon Research (dated Aug. 3,
1993) that describes Datalite!, their new online
Compression/Decompression utility (that effectively doubles your hard
drive space!). Datalite is interesting in itself, but this file lists
24 dealers who are carrying their product. If you want to find some
Atari Dealers, here's a source for some phone numbers!

y DAWN_E is Before Dawn v.1.01 by Arne Rudolph (dated 1993). This name
of this .ACC screen saver just might have some distant relation to a
well-known screensaver in the Mac (and now Windows) world, but who can
really tell! This version offers three modules, each of which may be
customized using a wide choice of IMG files (flying Toasters, and LOTS
more included) and, if your computer has DMA sound, .MOD files (only
one .MOD file included).

The program is in English, but the docs are in German. It's easy
enough to configure even without the docs, but I am having a problem
in keeping the displayed .IMGs from overrunning each other. I like the
fact that this .ACC can interface with the .MOD player Paula (when
Paula is run as an .ACC outside of MultiDesk), but I don't like the
fact that someone has included Paula 2.2 .ACC (a SHAREWARE program)
without any of the support files that should go along with Paula (docs
and the many other files that are normally distributed with Paula).
The author didn't do this, I am almost certain, because while he
mentions Paula in the docs, he doesn't include that file in his list
of files in the archive. Color or mono. It works on my STE TOS 1.62,
but I assume that it is fully ST--TT compatible (let me know if it
isn't, OK?).

y DROPIX_D is the demo version of Dropix by MajicSoft, Inc.. This is
an excellent two player Tetris clone, complete with very good sound,
excellent graphics, and keyboard or joystick control. You can also
play this game over the modem (in the full version). I like this game
for many reasons, one of which is that you can toggle between the
child and adult mode. Another neat feature is that you can configure
how sensitive your joystick will be. You can also attack your opponent
by various means (but watch out--you mess with him and he will mess
with you!). Along with the standard Tetris pieces the game also
provides you with bombs, weights, and power blocks (which do various
things for you to discover). This demo is limited in that you only get
to play two levels. You can play this from a hard drive, but with my
set up (lots of AUTO programs and .ACC's) the color map of the screen
is all messed up on exiting. Color only. Docs included.

y EZDESKDM is a demo version of EZDesk v.1.0 by David E. Rutherford.
EZDesk is an .ACC that will allow you to create, save and
automatically load your own color or black and white desktop
background (patterns, not pictures) while retaining the original GEM
desktop menu bar, icons and windows. You can also change the pattern
at any time. This demo is limited in that you are unable to save or
load custom images to or from disk or specify or load a default
desktop background.. TOS 1.0--Mega STE only. Docs and ordering
information included.

y E_USA is another wonderful program by Albert Baggetta. It features
the ever-popular Eliemouse, and is entitled, "Eliemouse In the
U.S.A.." v.1.0. This game does an excellent job of combining learning
and fun so your child (and you!) can learn the location, Capitals,
State Flowers and Birds, and State Songs (brief selections) of the
Continental United States. The animations really enhance this
program's attractiveness. There are many different learning and game
options from which to choose. I like this and recommend it to you.
This is a demo version of the game (you can't use your printer with
this demo and you are limited to only learning about six states).
Color only. Docs and ordering information included.

y FONT48 is Diva's Ansi-Font replacement. The author has designed and
implemented a "more elegant font for ansiterm." He feels that the
default font in AnsiTerm (currently v.1.9 and a great shareware ANSI
compatible term program) is too IBM-y in appearance, and that this
version is much more elegant. I haven't used AnsiTerm to any great
extent so I can't really comment. Try it and see!

y FRMK_DO by Mark Slagell (the author of SilkMouse v.3.1--if you don't
have that, get it!) is form_do() replacement for all of you
programmers out there (dated Aug. 1, 1993). This linkable object file
will only add 1000 bytes to your code, but it will allow you to assign
keystrokes to any dialog box (and several other things that I don't
understand). This archive includes object file, source code (S), docs,
and a sample program.

y GBENCH31 is GEM Bench v.3.1 by Ofir Gal (dated August 5, 1993). This
program provides you with a simple, GEM based way of testing the speed
(and much more) of your TOS 1.0--Falcon computer. It will test the
graphic screen drawing speed, the CPU speed (math and memory access
tests), and more. You can also use this program to tell you your
computer type, TOS version, MultiTOS (MiNT) version, Blitter status,
AES and GEMDOS versions, NVDI (a screen accelerator like Warp 9), FPU
and other information about the system. You can even force the system
(if you have a TT030!) to run in ST RAM or Fast RAM. It will also let
you compare your system against other STock Atari machines. Fully
MultiTOS compatible. Color or mono. Docs included. This version fixes
a number of bugs in version 3.0 (if you have 3.0, get this!).

y HARDCHR is a simple but fun hard disk recorder/effector for the
Falcon with a nice interface. Prompts are in German but easy to figure
out. This description is from the CodeHead BBS since I don't have a
Falcon030 on which to try it! I can say that the prompt that tells me
I can't run it on my STE comes in a box I can grab and move anywhere
on screen. That's interesting to see!

y HOWGENEV is an interesting article (dated Aug.2, 1993) by Al Fasoldt
(an excellent writer) entitled: "Geneva'S MULTITASKING: YOU DON'T NEED
ANYTHING ELSE TO ACHIEVE IT." Geneva, from Gribnif Software, is a
multitasking environment for the Atari line of computers. Since both
Geneva and NeoDesk are produced by Gribnif many people think that you
require NeoDesk to run Geneva. You don't (though having NeoDesk is a
great idea!). While telling you how to run Geneva without NeoDesk the
author tells you a lot about Geneva itself. That sounds like one great
utility! Imagine running numerous programs at once without a
tremendous slowdown of your system. It's possible with Geneva!

y HS_MO14 is the High Speed Modem fix v.1.4 by Harun Scheutzow (dated
July 24, 1993). Put this program in your AUTO folder and you will find
that you no longer have a problem you the ST, STE, Mega STe and TT
serial-port speed limitations on Modem Port 1. The author claims a
reliable speed increase to 38 kbps on an 8-mHz ST and much more on a
Mega STe and TT. The documentation is in German (also translated using
the program "German to English"). SHAREWARE. Color or mono. You only
need this if you have a 9600 baud modem or higher. I found this on the
CodeHead BBS.

y LED_122 is the Little red EDitor v.1.22 by Volkmar Wieners and
roland Bohn (dated July 9, 1993). This program is a message editor for
Fido Points and standard BBS's. LED uses the Quick BBS ST format for
message bases and is completely compatible with IOS, Bermuda, and
Jetmail. It also has full support for extended flags in message
headers. It's unfortunate, but while the German docs mention English
documentation, it's missing from this archive. ST--Falcon compatible.

y LHA210 is LHA v.2.10 by Roger Burrows (dated July 12, 1993). LHA is
a a .TTP (command line controlled) archiving program: that is, it
allows you to collect together a number of files and store them under
one file name and through data compression, reduce the file size so
that they (almost always) take up less space than they would on their
own. Older versions of LHA compressed files in the lh1 format (with
the three letter extension .LZH). This newest version also allows
compression using the lh5 format (still .LZH), the same as the newest
Quester .LZH utility (LZH201L) and allows decompression of some of the
older file formats out there that still crop up occasionally (.lz4,
lz5, and lh4), and full support for Amiga-style comments

Fully compatible with Charles Johnson's ArcShell v.3.1, this program
is a breeze to us. Color or mono. Docs included. Last issue I reviewed
Christian Grunenberg's LHarc v.2.21 (file name LHA_221). I don't think
that there is any relation between these two programs other than the
fact that they both deal with LZH files. RB's program and docs are all
in English with CG's docs are in German.

y MANUAL11 is Manualizer v.1.1 by Anthony Watson (dated July 30,
1993). This simple program will allow you to use your HP Laserjet (or
compatible printer) and your ST--TT computer to print out your ASCII
text files in a landscape format so that they will be in the proper
order to be able to fold the sheets into the form of a manual.
Believe me, this automates what is a royal pain to try to do in most
word processors or DTP programs! It's great for church songbooks, for
example! This is the same program as v.1.0, but now it is freeware
instead of SHAREWARE. NO ONE registered this excellent program, so he
decided to release it as freeware. Send him something anyway to
encourage him, OK? Color or mono. Docs included.

y MINSIDE by Tim Patrick is a series of IMG, PI3, and PC3 drawings
that parody the "Intel Inside" logo. These promote "Motorola Inside"
and feature the Atari Logo as well. Nicely done, with several
variations. They would all be excellent as a desktop background
picture. 172K uncompressed.

y MP5PATCH is a patch program for all of you MegaPaint Classic v.5.01
owners out there. This file will allow you to upgrade your software so
that you can now use U.S. page sizes and have SLM Laser Printer
compatibility. Free from CodeHead Technologies.

y MSA_2_32 is the Magic Shadow Archiver II, version 2.3+. Fully
GEM-based and works with MultiTOS. MSA_2_32.PRG can be renamed
MSA_2_32.ACC and run as an accessory. New in this version: A filename
can be passed by command line to MSA-II. This file becomes the default
.MSA file. Used by certain shells when dragging a file on MSA-II.
Magic Shadow Archiver reads in an entire floppy disk and compresses it
into a single file with an .MSA extension. It also reads .MSA files
and creates a full disk.

y PAGESIZE is a Caligrapher document by John Eidsvoog (dated August 1,
1993) that is entitled "Understanding Calligrapher's Printing." This
file (which needs to be loaded into Calligrapher, from CodeHead
Technologies) basically explains what is found on page 70 of your
Calligrapher manual, but since so many people seem to misunderstand
how to get the program to print out just the way they want it the
author explains it again here (how's that for support!). This explains
in detail the "actual page size, the physical page size, and the
virtual page size." This file also includes PRNTGRID.CPK which allows
you to accurately determine the exact printing area of which your
printer is capable (this was omitted from the Calligrapher 3
Professional master disks).

//// As you know, I like PhotoChrome 3 picture files (.PCS). Here are
some more I just downloaded.

y ECLIP92B is a .PCS format picture of a solar eclipse. Clouds partly
obscure the view and a faint reflection from the waters below accent
this scene.

y EVEREST3 is a nice .PCS picture of a daylight view of the Eastern
side (based on apparent shadows) of Mount Everest. The sky is blue,
the snow is white and blowing.

y HARD2 is a .PCS format of a young woman stretching after exercise
(she glistens with sweat). She is wearing a rather skimpy and
delapidated top.

y ISLAND is a very nice .PCS format picture of the sun shining over a
small island in a calm bay. Mountains in the background and an overall
golden color complement this peaceful sunrise (or sunset) scene.

y KAUAI_BA is a .PCS picture of Kauai, overlooking green pasture-like
land interspersed with trees and other vegetation, and then seeing the
bay with volcanic hills on the other side.

y LIGHT86 is a .PCS picture of the most awesome single-event lightning
display I have ever seen. Multiple forks coming down (or going up)
from the billowing clouds, illuminating them from within and without.
All of this takes place over the lights of a large (flat)
city/suburban area. The view is taken from what appears to be a nearby

y WATERY is a .PCS picture of a very hard to describe image. I think
that this is computer-generated, though I am not sure. Imagine a pane
of glass covered with irregular ripples. Now shine many colored lights
(predominately blues, violets, and greens) through that glass. Maybe
that's what this would remind you of.

y WATFALL1 is a .PCS picture of a two streamed waterfall pouring into
a forest pool. The stream then continues to flow downstream (of
course!) showing two other minor falls (or perhaps "rapids").

//// Now back to the rest...

y POVSTUFF is two .TIF files designed for use with extended rez, but
viewable on a standard ST using almost any TIF viewer. The first,
FALCON30.TIF is a view of an Shuttle Astronaut during a space walk as
well as several other images. The next, OBJECTS2.TIF is a series of
solid objects reflecting off of mirrored surfaces. Looking at these
two pictures using my STE is not a very satisfying experience. The 16
colors of low rez are not sufficent and so the pictures are quite
grainy. I would recommend that you get a Falcon to view these! This
file uncompresses to 1.15 Meg!

y RENSTIMP is a series of six Ren & Stimpy .AVR sound files which Bry
Edewaard made for Atari's System Audio Manager. They sound typical R &
S. Their titles are: Blast, Buttocks, Fence, Fireman, Horse1, and
RenWhiz. If you don't have System Audio Manager you can listen to
these with Sound Lab v.1.11 (the excellent SHAREWARE sound editing
tool by Damien M. Jones).

y SB_DEMO is a ScreenBlaster demo v.1.01 for the Falcon030 by Patrick
Jerchel (dated May 13, 1993). ScreenBlaster is a hardware and software
upgrade that will dramatically upgrade your Falcon video. I recommend
this highly to you Falcon owners. This demo is of the German product
(all in German), but it is now being distributed in the USA by Compo.

y SPANISH is a text file that contains 5620 Spanish words (according
to the uploader S. Ramirez, they are spelled correctly). It is
designed to be a supplemental dictionary for Calamus S or SL. There is
an attached message stating that the accent characters are likely to
be incorrect (but I don't know one way or the other!). There is
another file, found in the same place (GEnie) that contains the same
words, but is formatted as a Word Perfect 5.0 file.

y SPXCR_14 is SPX Creator v. 1.4 by Gizmo and the Phamtom. This
utility allows you to create your own SPX (Spectrum Extended
Pictures). SPX pictures can be up to six times larger (vertically)
than an ST monitor (if you have the memory) and you scroll thru the
picture using a moving window. These pictures take up your whole ST
screen, with no wasted borders! This archive includes several
utilities that will allow you to convert your GIF and RAW files into
Spectrum format and thence to .SPX format. GEM based. This creator
will switch your ST into 50 Hz mode (shakey, but very usable) and will
work in all resolutions, though you can only see the pictures in 8 MHz
color modes (TOS 1.0--2.06 compatible - at least). It will even work
on a 520 ST! The docs say an .SPX viewer is included, but it isn't.
The newest viewer is v.1.8 (found elsewhere - look for SPX18). Docs

y SP_VIEW by M.J.Matts is program that will allow you to install
itself and then view Spectrum compressed (.SPC) or Spectrum 512
uncompressed picture (.SPU) simply by double-clicking on them. You can
also just run the program and use the file selector to view the

y STALKY11 is STalky v.1.1 by Paul Lefebvre (dated August 11, 1993).
This is a desk accessory (or program) that gives STalker, the
excellent telecommunications package from Gribnif Software, a type
ahead buffer. The type ahead buffer is three lines consisting of 232
characters each to be entered. It only uses 15K of RAM. Keyboard
controlled. ST/STe/TT (and probably Falcon) compatible. This now works
with Geneva, the multi-tasking resource from Gribnif, as well as
Atari's MultiTOS (a few bug fixes from v.1.0). Color or mono. Docs

y T_REX1 is the a .DLT animation (use ANIMATE4 to view) of a
open-roofed car driving along a road in a Dinosaur preserve. A T-Rex
runs up next to the electrified fence, which suddenly loses its power,
jumps the fence, stomps on the car and flattens it, and then runs off.
This is the same animation as T_REX, except that a different car is
used and a different outcome occurs. Color only. Uncompresses to 225K.

y T_REX is the a .DLT animation (use ANIMATE4 to view) of a landrover
driving along a road in a Dinosaur preserve. A T-Rex runs up next to
the electrified fence, cocks a leg, and sprays the car, which then
drives off (to the car wash?). Color only. Uncompresses to 353K.

y TTART133 is TT Artist, the TT GEM Screen Saver v.1.33 by Massimo
Farina (dated July, 1993). This file is a very nice screen saver
designed for use with the TT. It takes advantage of all available
colors, and provides you with a wide selection of animated display
modules for you to choose. Docs included. This requires a TT.

y TTDESK_E is TT-Desk v.1.16 by Gregor Duchalski (dated July 1, 1993)
This is a utility by that will allow you to easily configure Atari's
"NewDesk." With this you can assign icons and edit "short-cut" keys
very easily (much easier than using the desktop). Even though this
program has a "TT" in its name it will work on any machine that uses
TOS 2.x or above (or so the uploaded assumes). Actually, it runs on
any TOS version (including MultiTOS), but since I don't have the
appropriate TOS, it doesn't do much good! Much of this program is in
English, but the docs are all in German (GER2EN30 does a pretty good
job of translating it).

y VIEW_24B by Doublas Little is a .TTP TARGA or RAW 24-bit image
viewer for the Falcon030 and Atari color monitors or TV's (dated Feb.,
1993). It will allow you to display TARGA files in up to 16 million
colors! Install it as an application and you're off! Limited (and
sufficient) docs included.

y VIEW_GIF by Doublas Little is a .TTP GIF image viewer for the
Falcon030 and VGA and Atari color monitors or TV's (dated Feb., 1993).
Install it as an application and you're off! This works in any
resolution. Limited (and sufficient) docs included.

y WAVE_20 by B. GRIER is a PRG/TTP (v.2.0) that will allow you to play
Microsoft Corp. WAV sound files on your STE and TT030 (and likely
Falcon030) computers (dated July 30, 1993). This version supports
16-bit mono WAVe files, supports incomplete WAVe files, such as those
found on the CD-ROMS from Profit Press, and corrects a problem
encountered when using standard input for file names. The program will
run, but not multitask under MultiTOS. The commented source code is
included (Pure C) so you can review and modify it for your own needs.
A WAVe file (Kaboom!) is included.

y XE_ST is a program that will emulate two XE 8-bit floppies on one ST
disk. This program, by Martin Krischik (dated May 29, 1988) runs on my
STe, but I really can't say much about it. From the docs (all in
German) I can see that it supports the Percom Standard (from 5.25" and
8" floppies through 1040kb?). It will allow you to emulate one ICD
compatible Hard disk as well. Supports Speedy, Sparta DOS and My DOS
and probably others as well (but since I can't read German please
don't hold me to much!). It will work on a 512K ST with a single-
sided drive, but to use all the funtions you need at least 2.5 meg of
RAM and a double-sided drive. Color or mono. Program and docs in

y XXED12 is XXED, the Hexadecimal/ASCII Editor v.1.2 by Jim Charlton
(dated April 8, 1990). This GEM based program will allow you to create
and edit files of any format, in insert or replace bytes using
hexadecimal or ascii input, display files simultaneously in hex and
ascii, cut, copy, print, paste and erase files, search or
search/replace on hex or ascii strings, mark and display your files in
up to seven individual windows. This looks to be a very full featured
editor. Color or mono. Docs and source code included. STE compatible
(at least). Found on the Boston Computer Society's BBS.

That's all for now! Take care.

All of these files can be found on one or more of the following
on-line services: GEnie (AEO.4 or M.BURKLEY1), Delphi (MRBURKLEY), The
CodeHead BBS (213-461-2095), Toad Hall (617-567-8642), and The Boston
Computer Society's Atari BBS (617-396-4607) (Michael R. Burkley).
Drop me a line!


 |||   The Second Batch of Twenty Questions to Atari
 |||   Courtesy: The Atari Forums on CompuServe
/ | \  ----------------------------------------------------------------


Please accept my apologies for this taking so long to get to you.
I've been incredibly busy here at Atari, and there is so much to do in
so little time.   I've taken the liberty of combining a few of the
questions together since I felt they were best handled by a single

Q: We have heard that LlamaZap for the Falcon is finally finished, and
the code has been sent to Atari US for duplication and packaging.  How
soon will LlamaZap be on sale in the US and Europe?

>From Bob Brodie:
Llamazap is still in our software testing group, it has not been
approved for released yet.  I've been contacted by a UK based magazine
that tells me that they have spoken to the programmer.  They state
that the programmer indicated that he's finished with the program.
Our policies require it to go through an extensive software testing
program here before it will be released.

In the US, our plans are to bundle at least a couple of the games for
the Falcon030 with the new controller pad.  Llamazap is a leading
candidate to be sold in that fashion.  I would expect to see it in the
fall.  Pricing on the controllers isn't 100% firm right now, but I
would look for it to be in the $20-30 range.

Q: When the Falcon was first announced, there were comments indicating
that a DSP modem was possible.  Is this still being worked on by

>From Bob Brodie:
Yes it is.  There have been a few problems in getting this product
implemented, especially at the price/performance point that we want it
to be done at.  We're working closely with a third party developer to
make this happen.  I'm confident that it WILL be done, it's just a
question of when.

Q: MultiTOS is reported to be fairly slow on the Falcon.  Is Atari
working on faster code?  Is the slowness due to slow video routines
that something like Warp 9 could cure?

>From Bob Brodie:
I've heard all kinds of opinions about how fast (or slow) MultiTOS is.
It's my impression that people reactions depend on what they've used
before.  If they had any experience with a Multitasking OS before,
they probably recognize it to be pretty efficient.  If they
haven't...they might not be impressed at all.

Certainly we're very interested in seeing updates to MultiTOS.  But
it's only been shipping for a short period of time, so I don't believe
it's realistic to expect an update this soon.  Perhaps later this

Re Warp 9, well...yes and no.  Warp 9 will improve the screen re-draws
speed, but there is always another sacrifice: compatibility.  This
isn't a slam against Warp 9, I use it on one of the systems in my
office here at Atari. The VDI is designed to be what it is, a VIRTUAL
interface that should work in ANY rez.  Warp 9 doesn't work in any
rez, which is why it gets upgraded every time we release a new

>From Bill Rehbock:
I use NVDI on my Falcon030 daily.  It works great with MultiTOS, and
I'm very happy.  But, I can hardly wait to be able to use Warp 9!

Q: What is the practical number of channels of Direct-to-disk
recording and playback that the Falcon can support with an SCSI-2
drive?  I've been hearing that SCSI-2, as fast as it is, isn't fast
enough for the full eight channels supported by the Falcon.  Also,
what's the highest channel count using an IDE drive?

>From James Grunke:
The Falcon030 SCSI-2 hardware does have the bandwidth to support 8
channels of digital audio at 50Khz.  We have done a proof of concept
here but it is not easy to move that much data, the software must be
well written.  As well, limitations would include the access speed of
the external drive.   Applications using SCSI-2 on the Falcon030
handle digital audio in the following ways:

Available now in Europe with US release pending, Digitape from Trade
iT uses eight tracks, two for record with the remaining six for
simultaneous playback, this should work on IDE as well as SCSI-2

Available soon, the Steinberg Cubase Audio/Yamaha CBX-D5 system will
use the SCSI-2 port for its 4 track system.  I understand that you can
link two 'D-5's to achieve 8 tracks total.  Cubase Audio for Falcon
(available later this fall) specs show that 4 tracks are used for
record/playback along with 4 voices of sample playback.

Available now, D2D 4TFX uses 4 tracks via SCSI-2 or IDE drives.

Please contact developers directly for more information.

Q: With current technology, about how many true color video frames per
second should the Falcon be capable of handling in a video playback
application?  Is this faster than what Windows video can do these

>From Bill Rehbock:
There are a lot of variables that have an impact on the answer to your
question.  It will depend on the exact rez that you are in, and if
sound is included.  At 320x200, 60 frames per second on a Falcon is
very doable.  Movies do 30 frames per second (with sound), most
animated cartoons are running at 12 frames per second, so you can see
that we're pretty competitive.

Re the comparison versus Windows, again, there are too many variables
to tell what kind of perfomance to expect. It would depend which
Windows application you were comparing it to, and what kind of
hardware Windows was running under.  For example,  the Intel Smart
Video Recorder playback rate is approximately 20-30 frames per
seconds.  The price on the card alone is $549 (street price), and
requires a 25 Mhz 486SX, and includes Intel's Indio video compression

Q: Now that the Falcon is shipping worldwide, what are the best
selling, Falcon specific (or Falcon enhanced) applications (the top 3
or 4 please)? (And if the top three are all MIDI apps, whats the best
selling non-Midi app)

>From Bill Rehbock:
We don't require our developers to report there sales to us, so they
don't.  But MusiCOMM appears to be doing well, as is True Paint,  and
Atari Works <shameless plug>.  We really like Phoenix Render, but I
don't think it's selling to well.  On the game side, Ishar is selling
well, and Transarctica looks terrific.

Q: At the most recent shareholders meeting, Sam Tramiel commented that
although the Falcon030 was not selling as well as anticipated, Atari
is nonetheless committed to staying in the computer market and that
there will be additional Falcon models.  Can you please tell us about
some of the models under consideration?

>From Bob Brodie:
Sorry, it is not our policy to discuss unannounced products.  I am
happy to confirm for you that as we stated when we announced the Atari
Falcon030, there is a new family of computers being produced by Atari.
The Falcon030 is the first of that family of computers.  I've seen
prototypes of future machines, and I believe that you'll be pleased
with the results.

Q: In the last question and answer session it was stated that Atari
plans to tell everyone about the Falcon030 but not until their is
enough product to meet the demand.  The Jaguar right now is already in
very hot demand and Atari definitely needs to make sure they can meet
it, how does Atari plan to do that as customers who can't get the
product might be turned off and move to another platform?

>From Bob Brodie:
First of all, it's important to note that we plan to ship initially
only to New York and San Francisco markets with the initial shipments
of the Jaguar.  We don't plan on being able to supply ANY of the
demand outside of those areas.  We're already getting calls from
potential dealers outside of that area, and we tell them we won't sell
to them until next year.

One of the ways that we will make sure that people will not get turned
off is by the extensive coverage that we will have in the magazines.
We've already seen some write ups by the Jaguar in a few of the gaming
magazines, and we continue to work very closely with some of the
biggest mags in the field to ensure their coverage.  I've personally
spoken to a number of the editors and writers that have seen video
tape footage of the Jaguar.  Universally, they are thrilled, and very
excited about the Jaguar.  They want review units _NOW_!  And that I'm
certain what that really means is that they want to play the machine,
not just write about it!!

We're being very up front about our sales plans for the Jaguar.
People will either have to order it from either New York or San
Francisco based stores, or wait for the product to be available in
their area.  The level of excitement in the game media is very high,
and I'm sure that will splash over into the public as well.

Q: Finally, When will Atari make public the names of 3rd party
companies for the Jaguar?

>From Bob Brodie:
I expect to make some press releases later this month on the Jaguar,
but I'm not sure exactly when we'll make that one.  Certainly within
the next 90 days.

Q: According to rumors, the Jaguar game machine has some very significant
technological capabilities.  Is there a public target date for it yet?

>From Bob Brodie:
The Jaguar definitely has some very significant technological
capabilities...that's a fact, not a rumor!!

The unit will be available for sale in the fall season in New York and
San Francisco.

Q: If the recently announced numbers of the Atari/IBM deal are to be
taken at face value, the $500 million figure equates to 2.5 million
units at a retail price of $200.  How long is the contract with IBM to
last?  Who will be able to sell the Jaguar (just current Atari

>From Bob Brodie:  The contract with IBM is for 30 months.

Obviously, we're looking toward high volume retail outlets, but
neither do we want to exclude our dealers that sell our computer
products.  At this point, I think it's reasonable to assume that the
dealers will be able to purchase the Jaguar through distributors.

Q: The press releases about the new Jaguar relationship with IBM state
that IBM will be responsible for building and 'distributing' the
Jaguar? Exactly what is meant by 'distributing?'  Does this mean
people will be able to order it from IBM, too?  Or will IBM simply
ship the completed units to whomever Atari tell them to?

>From Bob Brodie:
Distributing them means that IBM will warehouse and ship the products
for us.  The orders will still come to Atari, and then we will notify
IBM whom to ship the product to.  IBM will not be selling the Jaguar.

Q: Will there be a Jaguar version of LlamaZap?

>From Bob Brodie:
We would prefer not to discuss any titles other than what we've
released in our press releases at this time, sorry.

Q: I have gotten conflicting reports concerning the TT030 going back
into production. If it's true, will it be available to the public?
I've been trying to buy one, but nobody has any.

>From Bob Brodie:  Yes, it will be available again.

Try calling Winners Circle in Berkley, CA.    Their phone number is
510-845-4814.  I happen to know that they have a new unit in stock as
of today (8/14/93), as well as a used unit.

Q: I was a beta tester for the World Clock program for the Portfolio.
The testing was finished about a year ago but I haven't seen it
announced to the public yet.  Whats the status of this program? Atari
Corp has not announced any new software or peripherals for the
Portfolio for a long time.  There have been a few rumors but nothing
concrete about a Portfolio II model.  Is the Portfolio dead?

>From Bob Brodie:
At this point in time, we are devoting almost all of our energies
toward the Jaguar.  All Portfolio projects are on hold.

Q: We were told a few months ago that ATARI EXPLORER magazine was "under
review" and that an announcement about its continuing status would be
made "shortly."  When (if ever) can we expect the next issue?

>From Bob Brodie:
At the time we made that statement, we were in negoiations to have
Atari Explorer produced as an out of house publication.  Negotiations
to have Atari Explorer Magazine restarted as an out of house
publication have broken down.  While Atari still believes in the
magazine, it is not profitable at this time, and we cannot afford to
publish it at a loss.  However, we are very optimistic that with the
success of the Jaguar, we will be able to renew publishing Explorer


--       --==--==--    CompuServe Sign-Up Information    --==--==--      --
--                                                                       --
-- To sign up for CompuServe service, call (voice call) (800) 848-8199.  --
-- Ask for operator #198. You will be sent a $15.00 value CIS membership --
-- kit for free.                                                         --
--                                                                       --
--       --==--==--    CompuServe Sign-Up Information    --==--==--      --


 |||   An Open Letter from Bob Brodie
 |||   By: Bob Brodie
/ | \  GEnie: BOB-BRODIE   Delphi: BOBBRO

Recently, there has been a tremedous amount of coverage about the
problems that Lexicor Software has had on GEnie. Virtually all of the
press has come from the online magazine, Silicon Times Report. Most of
you know this publication better as STReport, published by Ralph
Mariano. For most of my time at Atari, Ralph has been a harsh critic
of almost anything Atari has done, and to be fair, sometimes he's been
right. Of course, when you have as many opinions as Ralph does, sooner
or later you're bound to be right! <GRIN>

Seriously, as a rule, I have tried to avoid discussions about Ralph
Mariano and his publication in most of the presentations that I give,
and most of the online networks that I participate in. This is because
I have found that almost without fail, getting into a discussion about
this man, or his opinions is unproductive, and leads to nothing but
trouble. He and his followers will yell, scream, write, call, and
basically do whatever they can to bully or intimidate people into
silence, or into changing their opinion.

But sometimes, Ralph finally goes too far, and pushes me past my
limits. This is one of those times. I have followed his coverage of
the IAAD\Lexicor\GEnie controversy for sometime now. Basically, I've
looked at it and found myself asking what all the fuss was about.

Recently, Dana Jacobsen of STR made a post on Delphi asking for input
from people about Lexicor losing their free access on GEnie. So I
gave mine.

It was wrong of me to think that I could simply ask a question of one
of the staff members of STR without Mariano going ballistic. If I
hadn't been so naive as to believe that I could have a civilized
dialogue with an STR staff member, you wouldn't be putting up with the
kind of asinine exchanges that Ralph has made his trademark. What
follows now is Ralph Mariano's response to my message, and a public
reply to Ralph.

For the most part, I just ignore Mariano. He's so offensive that I
think it is self evident to most people that STR is nothing but a
scandal sheet. But I've become sickened of all the stuff that I have
read in STR. The personal attacks are shameful. The weekly charecter
assasinations against Nathan and Darlah are insulting and demeaning.
And I'm just sick and tired of being sick and tired of this man and
his tirades. I'm sick and tired of seeing all this opinion spewed
forth as fact from Mariano and his staff with no rebuttal.

So, we're breaking our rule this week in AEO. We're going to talk
about Ralph Mariano. We're not like Ralph, though. We'll show you his
full, unedited message. No snide comments interspersed in it. No cheap
shots alongside the message, nothing taken out of context.

My reply has much coarser language than I usually use. In advance of
it, I apologize if I offend anyone. However, I hope that it
underscores the level of affront that I feel, and the anger over the
way that this man continually misrepresents the truth, and abuses his
position in the media.


59139 29-AUG 17:13 News & Reviews
     RE: STReport #9.35 (Re: Msg 59126)
     From: RMARIANO     To: BOBBRO

     Here  we go again folks... the  old, "I am afraid to  have what I said
reproduced/reprinted etc., for  fear I may  be held responsible for  what I
said", syndrome again.  <sigh>

Robert G. Brodie placed this notice at the end of a message he posted on
Delphi in the Atari Forum.. message # 59126.

This message is copyright Robert G. Brodie 1993, and may not be reproduced
in any fashion without my expressed written permission.

OK, so we didn't reproduce it in any way.. it we PARAPHRASED IT!

This post is in reply to Director Brodie's message # 59126....

     Its  sad  to  see  Atari's  Director  of  Communications,  Bob Brodie,
seemingly  jump right  into  the middle  of  this Lexicor/STRT/IAAD  matter
without being straight  forward enough  to reveal  to the  users the  WHOLE
STORY!  Apparently, more expert double speak and nothing more  is all they,
(the users), (especially Lexicor's) deserve.

In so many words Bob sez...

     he hasn't read the recent issue of STReport yet... but, please allow
     him to ask a question....

     Bob old  boy, if you  hadn't "read"  the issue yet....  how could  you
possibly have a  question about the  recent issue?   Unless of course,  you
have  some prior  knowledge of  the issues  and the  various drifts  of the
topics.  Then  again, you could  very well have been  "prompted" to have  a
question or two.  In any case, we proceed.

     His question is quite amusing  as only one who was very  well informed
as to what was/is "really" going on could possibly ask such a question.  He
asks Dana in so many words...

     Being as concerned as you are about Lexicor, their flags, etc., Have
     you asked for any explanations from Darlah and ... have you offered
     any viewpoints relative to GEnie's concern about this issue?

     To  be quite  honest with  you  there Bob,  old buddy,  GEnie has  had
nothing to do with this entire fiasco, its been the STRT and its wreckspert
managers who've apparently  been very busy  escalating this entire  matter.
Let's  get that  straight right  off the  bat.   From the  original Lexicor
complaints of six weeks ago about  message deletions to now, the aggressive
acts have all come from the RT management team.  Namely; Nathan and Darlah.
STReport has  tried time and time  again to get a straight  answer from the
STRT management team, but  all we get is rhetoric,  threats, and screaming.
I have the LD  bills to prove it too.  We HAVE  TRIED. But then again, they
say actions speak louder than words.  Lexicor didn't kill its own flags and
give up its category for no reason although I'm sure you'd love everyone to
believe that.  Like I said; Actions speak louder than words.

     Bob then goes on to say with "all sincerity...."
     "his understanding" is that Lee Seiler was told his flags would not be
     "renewed" and that Seler requested the Lexicor category be closed!!!!

     Now, we  are seeing  MR. ATARI  trying to make  Lee Seiler  of Lexicor
Software look like a first class sap!  The flags not being "renewed" is the
same exact thing as  taken away!  What good is a  category if one's company
and its personel must PAY  to suppurt its users and GEnie's members  in the
category on  a daily basis?   Every one KNOWS its  cost prohibitive without
flagged accounts.

     Bob then goes on to bring up a message posted on GEnie five weeks ago
     about the 9600 vs 2400 baud, disappearing free flag signal matter.

     Certainly you  are not trying  to tell  us that's the  reason for  the
latest "disappearance" of  Lexicor's flags are you  Bob?  Surely  you jest.
(Most of you have read about the baud vs free flag thing in STReport at the
time it was relevant.)

     Brodie then goes on and blathers about "balanced" reporting...

     More  of the  "old  kill  the  messenger  nonsense".    Actually  more
diversionary garbage.  "The bottom line is still why was Lexicor booted off
GEnie by Nathan and Darlah... Why were the flags not "renewed"? (Read taken
away)  ...the Category Closed?   ALL THE REASONS?   All this is  in a press
release from  Seiler in STReport 9.35.   Speaking of balanced,  when is the
STRT going  to tell the whole  truth about the Lexicor  matter and equally,
when is the  IAAD going to  tell the  users the REAL  REASON for  expelling
Lexicor.   You know, about the fabricated "given away Falcon story"??  Must
we all wait for the trip to France to end to get at the truth or, will that
party be "wizened" when he  returns?  Bottom line is .. STReport KNOWS what
the REAL STORY is!

                         NOW THE BIG QUESTION FOLKS

                     "WHO STANDS TO BENEFIT THE MOST BY

                       LEXICOR'S OUSTER FROM THE IAAD


     Bob then goes on to say he's "grateful" for Dana's suggestion of Atari
perhaps re-evaluating its overall position with the present STRT management
and its rather questionable policies.

     No argument there.... STReport  agrees completely.  Its time  to check
into many "questionable actions" going on  there.  We know of at  least 110
reasons, if not more.  Somebody ask Gene Mosher how he feels!
     Brodie KEEPS making a silly mistake.. he sez the problem is between a
"single developer and GEnie"....

     Really??   More double speak!  Not totally true, as none of this would
be  happening if  Nathan  and  Darlah  hadn't  seemingly  taken  the  first
perceivable aggressive actions.   They... are NOT GEnie, they are  the STRT
and  that's all they are.   At the  rate things are going  they can KEEP it

Bob then goes on to insinuate ....

     that since STReport was also "victimized" by The Nathan & Darlah Show,
     perhaps we have some sort of "special interest" in this sordid outrage
     called the Lexicor/STRT/IAAD matter?

     How quaint,  let's see, they have  no real argument since  STReport is
telling the truth about the entire scenario.  So.... they have to resort to
the  old, "let's  try to  discredit them!"   Once  again Mr.  Brodie; "NICE
TRY..... BUT NO CIGAR!"  You've tried that maneuver one too many times.

     Those  facts are  already known;   STReport  DID lose  its  free flags
because Darlah killed them.  STReport  did lose its category because Darlah
killed it  too and  Nathan had  told STR  he felt  STReport  or, any  other
magazine for that matter, didn't "need" an entire category.   Darlah stated
they were short of "room" then too!  Truth is, we ARE interested because it
happened to us too.  In fact it  all sounds far too familiar!  We only hope
that by exposing this outrageous practice to all it may stop before another
Atari supporter is burnt.

     Notice  any similarities folks?  FACT... Lexicor's flags are gone, Lee
Seiler sez  they were taken  away from him.   FACT.. Lexicor's  category is
GONE.  Darlah  has/had a notice up on the RT  entry saying the category got
gone due to "consolidation".

     In  closing Bob, why  you didn't elect  to tell the  users the entire,
"real story" is beyond comprehension.  Must the "old line" of tell 'em only
what they _need_ to know continue  to prevail?  Perhaps.. just perhaps, its
time the truth  was presented the  users and they  were allowed to  make up
their own minds.

     Again, to the many loyal Atarians and STReport readers .....

                           FROM STR927 TO STR935
                      THEN ..AFTER YOU'VE READ IT ALL;
                               ASK YOURSELF;
                      "WHO.. STANDS TO _GAIN THE MOST_
                        WHAT'S HAPPENED TO LEXICOR?"

     I believe the answer  you come up  with will suddenly make  everything
crystal clear.  In any case, the  whole story will be made public within  a
short time  for all to  read.   STReport is trying  everything possible  to
allow  the principals  in this  matter to  present the  whole truth  to the
users.  If  that cannot happen... we  shall do so.   The double speak  must

             Ralph @ STReport International Online Magazine



First of all, I have to confess that I'm truly puzzled by your
paraphrasing of my message on-line. Why did you do that? It is posted
on Delphi for all to see. The only reason that I asked that it not be
reproduced is that I don't want to be associated with you, or your
publication in any fashion. If you insist on paraphrasing me in your
issue, I suppose that there isn't anything that I can do about it. If
you were a man of any honor, any respect, you would honor my wishes to
not have any of my messages reprinted in your publication. But why
paraphrase my message on-line here? The message isn't hidden, all
anyone that wants to read it has to do is go look it up. Seems to me
that all you're doing is beating your own drum to make noise, and for
nothing other than ego. The net effect is that the paying customers of
the Atari Advantage have to pay to read my message twice. I think
that's really inconsiderate of the paying customers! Your message has
all the trappings of a self-righteous, overbearing, loudmouth,
obsessive, vindictive, self-inflated ego-maniac, who couldn't care
less about anything other than himself.

You say in your message: "His question is quite amusing as only one
who was very well informed as to what was/is "really" going on could
possibly ask such a question." Oh, I don't know about that, Ralph.
Anyone that has read STR for any length of time can attest to the fact
that you seldom give both sides equal time. You always show _your_
side of the issue. In the rare occasions that you have given equal
time, you typically follow up the rebuttal in your issue with a final
blast against anyone that dares to disagree with you. Therefore, my
question to Dana, which was basically asking if STR contacted Darlah
or GEnie for their comment regarding the story was perfectly

You see Ralph, you make a lot of noise about telling the users the
whole story. But the simple fact is that YOU NEVER TELL THE WHOLE
STORY!!! You _always_ shape your commentary to suit your own agenda.
Giving the whole story (from both perspectives) is something that I
cannot recall STR ever doing. While you lambast me for not telling the
whole story, you are yourself guilty of the very thing that you accuse
me of. And that's a fact! You assumed that I was there to debate the
whole Lexicor controversy, but that's not correct either. I was only
responding to a single message from an STR staff member, who was
soliciting opinions.

And it's a fact once again that in your issue there is no statement to
the effect that "We contacted Darlah, and she would only agree to be
interviewed via e-mail so she would have a written record of what was
actually stated. We declined her offer for a written interview", or
perhaps "Darlah declined to comment". Nope, nothing to indicate to
your readers that you were at all interested in showing the other side
of the issue. And I think that's wrong.

You state that you have the long distance bills to prove that you
tried to contact Nathan and Darlah. I would like to confirm that
myself by personally seeing those bills.

If it's easier for you to FAX them, you may FAX them to 408-745-2088.

Either way, since you have alleged that you have proof that you
attempted to contact them, I would like to see it. Of course, there is
no telling what exactly was said while you were on the phone. Maybe
you asked for information and were told that it was none of your
business. Perhaps you were told that it was a private matter between
Lexicor and the STRT. Those are appropriate answers, too. But if
that's what you were told, then you should have indicated that in your
issue. You didn't, so I don't believe that you ever tried.

I doubt that I'll ever see the copies of the bills that you have to
prove your point. It's typical of you to claim you have proof, but if
pressed, you refuse to show it. Besides, who can blame Nathan and
Darlah for refusing to talk with you? You've taken great delight in
doing everything in your power to belittle, insult, demean, and lower
their image with the public!! Your "attempts" at communicating with
them are deplorable!! Your "problem solving efforts" are
inflammatory!! All you have done is pour more gas on the flames.
Typical Mariano problem solving.

And if I do see those bills, what I am going to see? I'm going to see
where you called DMC Publishing in Toronto. I will see _NO RECORD_ of
where you have spoken to Darlah personally. My understanding is that
Darlah will not talk to you on the phone. She insists on having a
written record of correspondence with you via GEnie E-mail, because of
the way you have handled voice communication in the past. And it is
further my understanding that you haven't written to her in about six
months. Whenever you want to communicate with Darlah, you call Nathan
at DMC. And now he isn't taking your calls anymore, either!

You know darn good and well that Darlah won't talk to you on the
phone, Ralph. So when you trumpet that "you tried" to get their side
of the story, you aren't being entirely honest. Because if you _HAD
REALLY TRIED_, you would have sent e-mail to Darlah. Hmmmm, does that
qualify as a lie from Ralph Mariano????? Or is that really just a
"half truth", or " a little white lie" that shouldn't count?? Or is
there another word we should use for this particular Mariano manuever?
Misconception? Deception? Twisting the truth?

You next try to "get something straight right off the bat" that the ST
RT and its managers have been escalating the matter. Let me get this
straight Ralph... are you trying to tell me that Lee complaining to
everyone under the sun about the events on GEnie isn't escalating
things? You don't see that as an aggressive act? Don't get me wrong, I
still enjoy a very good relationship with both parties, but c'mon!
Lexicor goes to the Federal Trade Commission to complain, and you
don't see that as aggressive?

You state in your post that you were threatened by Nathan and Darlah.
That's rather unlike them. Please tell us exactly what the threats
were. And screaming??? Ralph, if anyone in the Atari Community has the
award for screaming, it's YOU! I remember Darlah posting _in public_
how their baby-sitter became alarmed when the answering machine at
Darlah's home malfunctioned, and instead of playing back a recorded
greeting, began playing back messages. Callers got to hear you
screaming and swearing through the phone at her! Screaming, obscenity
filled phone calls are a Mariano tradition!!!

Next, you accuse me of trying "to make Lee Seiler look like a first
class sap!" Sorry, I don't see that at all. In fact, there is no
mention of Lee throughout my post at all. For the record, I have
always enjoyed an excellent relationship with Lee. The present
controversy does not involve Atari's relationship with Lexicor. We
have no reason to change the opinion we have of either Lee, or his
company. What I did was to convey to Dana what I understood to be the
facts as I know them. I made no negative comment about Lee, or
Lexicor. This is just another example of you _MAKING_ the news, not
reporting it.

Re: the matter of the flag being taken away vs. not renewed.... I
thought that was self evident. I see I was mistaken, and will be happy
to explain the difference. On GEnie, flags are not given for an
indefinite period of time, like internal accounts for example. _ALL_
flags have a point in time at which they will expire, no matter how
good or bad the perceived value of the flag holder is. Darlah sent Lee
numerous letters stating what needed to be done to renew the flags.
If she had taken the flag away, it would have required additional
action by her to eliminate the flagged status of the account prior to
it's normal expiration. To further underscore the difference between
flags and an internal account, a flag is given to the holder of a
"regular GEnie account" to allow him to operate at no charge in a
particular area on GEnie. Once the flag holder leaves the area that
the flag is active for, then he is subject to normal system usage
charges again. An internal account is an account that is totally free
of charges anywhere on the system.

Just for the record, since you haven't shown Darlah's side of the
equation, here's her post from GEnie on Lee's flag. I've left the
entire post intact, even though the first portion of it isn't
pertinent to the discussion about Lexicor.


Category 1,  Topic 2
Message 33        Tue Aug 31, 1993
DARLAH [RT~SYSOP]            at 15:04 EDT

Sorry folks, I have been moving. Not quite settled in but the phones are
finally installed and the computer is half up. :-)

I would be ETERNALLY grateful if the software could take into account the
pointers when a topic move is made. I would sell everything I had, well
almost, if they could do so. Honestly, I have conveyed my concerns to the


Lexicor called into CSO at GEnie and requested the area be closed
immediately. We complied. He also stated that he was canceling his
accounts. He canceled the LEXICOR2 account. What was my request? Please
retract the lies....lies that can be verified to be such. Please stop
slandering this RT or GEnie or the representatives of this RT or we can't
offer you flags. It is against our policy to offer flags to those that
try to damage this RT. We would like to work with you in correcting this
matter etc etc.... Seeing that a good majority of our devs don't even
have free accounts and Lexicor had 4, I think we were more than fair with
our treatment to them.

John Stanford still has a flag and will remain having one as long as he
supports his products online. Lexicor can and could have their flags
again but not with the lies they are spreading. I read the press
release...well I scanned it.  Lee and Ralph's version of the truth leaves
something to be desired in a  BIG way. So what's new?


Re: the allegation that it's cost prohibitive for Lexicor to be online
without a free flag, that might be your opinion, Ralph. But I don't
see you backing it up. In fact, the issuance of a flag or an internal
is not a right, it is a privilege. There are numerous examples of
other companies paying to do support on-line. Most of the developers
in the Atari RTs do not have free accounts. Ron Luks told me that on
CompuServe, there are a number of companies willing to pay to do their
on-line support!! Even if it did cost them money, with GEnie's new
rate structure, it's more cost effective than ever to be on-line!!

Personally, I'm impressed that at least one of the programmers from
Lexicor, John Standford, has opted to remain on GEnie to support his
product, Phoenix Render. He has publicly stated that he will continue
to support the product on GEnie. It's no surprise to me that there is
no mention of that in your article, or in your message. Why? It would
appear that it's because it doesn't suit your present efforts to smear
Darlah, Nathan, and the ST RT.

Now we move to the cry of "the old kill the messenger nonsense".
Look, didn't you read the message thread at all????? I didn't say the
messenger should be killed anywhere in that post. Dana had asked
people to give him their input on the Lexicor/GEnie issue. So I did as
he asked, and gave him my input. Did I ask for the messenger to be
killed? Nope. I did indicate, in simple terms, a concern about
balanced reporting. Your subsequent posts have done more to justify my
concerns about that than anything I personally could have stated!!!!
Thanks for proving my point!!!

There are a lot of reasons that I can think of about why a flag should
not be renewed, or why an internal revoked. So far, I haven't seen you
give any reason about why they were removed, although you allege that
you KNOW what the REAL STORY is!

You also scream your question about who stands to benefit the most by
Lexicor's ouster from the IAAD. Interesting question. How can anyone
benefit, or even more importantly, what harm has come to Lexicor by
their expulsion from the IAAD? Have they lost any of the rights to
developer support from Atari? No. Have they lost the right to market
any of their products in the US, or for that matter anywhere else in
the world? No. Have they lost any status in any way as a company? No,
they have not.

In fact, some of the most successful developers on the platform are
NOT members of the IAAD. Like Migraph, Emagic, and Steinberg just to
name three. Migraph is one of the original Atari developers, Emagic is
the team that produces Notator, and Steinberg is the company that
produces Cubase, two of the finest music programs on the market. So
exactly how is Lexicor harmed by no longer being in the IAAD? And how
can anyone capitalize on that? The REAL TRUTH is that Lexicor's only
harm in being removed from the IAAD came in the form of the negative
publicity that Lexicor itself generated via STR, nothing else. There
is no other loss.

Further, there is simply no way for anyone to capitalize on the fact
that Lexicor is no longer a member of the IAAD. The reality is that
companies like Migraph and Steinberg prove on a daily basis that IAAD
membership is not a prerequisite for success.

I'll skip over some of the portions of your post, because frankly they
aren't worth responding to. Let's drop down to the part where you talk
about the fact that STR lost its free flags because Darlah killed it.
That statement is correct as far as it goes. Yes, your free flagged
account ST-REPORT was cancelled by Darlah. But what happened to your
_internal_ account, Ralph? I notice that you avoid discussing that
entirely. And the fact is, GEnie cancelled your system wide, free
internal account, ST.REPORT, Ralph. They read a few of your issues,
and came to the conclusion that sponsoring an account for STR was not
in the best interests of GEnie. All Darlah did was what any
responsible sysop would do. She pointed out that there was a potential
problem with the account holder. GEnie made the determination to
eliminate your system wide, free internal account, and they held off
long after your library and category had been removed from both the ST
RT and the GEnie Lamp RT.

Folks, this is a classic Mariano move! Ralph has told you as much as
_HE_ wanted you to know, that he held back a very salient point - the
difference of free flags vs. internal accounts, and who eliminated his
internal account on GEnie. Truly classic: bitch about double speak
from others in one breath, and do it yourself in the next!!!!

I never intended to have this turn into a debate with you, Ralph. I
read a message from Dana asking for input. I gave mine. It was not my
intent to enter into a full scale debate about Lexicor. My only intent
was to respond to a single message, and question if both sides of the
story were being told. I will now, once again, commend Dana for his
well written, well thought out response. Yes, Dana gave me a few
nudges in there, but nothing like the post that you chose to make,
Ralph. You could learn a lot by following his example, instead of
posting your temper tantrums online.

You profess in your post to tell the whole truth. Well, the whole
truth is that you don't have all the facts. You've burned all your
bridges with anyone of any authority on GEnie. They threw you off of
their service, closed your libraries, deleted your messages and did it
not just in Darlah's area, but in the GEnie Lamp RT as well. Darlah
wasn't the only one to recognize the problems that you created.

Sysop Jon Peters had opened up an area for STR in the GEnie Lamp RT.
After a brief period of time, he closed the category, removed the STR
library, purged the files, and declined to accept further issues of
STR. That means that you have not been thrown out of just one RT on
GEnie, but TWO! The IAAD holds you in disdain. You are persona
non-grata at Atari. Because you don't have all the facts, nor can you
get all the facts, it seems that you print whatever your imagination
conjures up, or whatever happens to best suit your cause of the
moment. In my opinion, TRUTH and STR are not synonyms, they are

I envision a day in the future when a user group will gather around to
talk about the old days. When people will talk about you, it's my
opinion that it will be like a faded, washed up, has been. You know,
the kind of "one trick pony" that has a hit single, knocks 'em dead on
the charts of a few weeks, sells some CDs, and does concerts in major
venues. But before long, he is reduced to being a lounge act,
performing in dingy bar and grills. And then the next step is being a
footnote in history. People will say "I wonder what ever happened to
that STReport thing, remember that? You had to wade through a ton of
crap to even _hope_ to find a kernal of info, and the whole thing
finally turned into a giant editorial. Who did that thing anyway?"

"Wasn't that the same guy that ran a business that took money from a
bunch of people, and never shipped their stuff???? The one who sold
high speed modems to a bunch of sysops in the UK, and then cut the
link to them when they complained that they never got them? YEAH,
BUYING, with a 1.2 Gigabyte HARD DISK, CD-ROM, planned a multi-line

There was a day that everyone at Atari rushed to see your issue on
Friday to see what you were saying. Now, I can think of no one here at
Atari who cares what you write. When I speak to significant developers
they all say "Who cares? It's only Ralph Mariano. He has no
credibility, he's just a rumor monger!! We just don't care what he
says. Why anyone of intelligence would put any credibility on Mariano
and STR is beyond me!"

In closing, I'd like to share with you the words of Governor Pete
Wilson (R-Calif.) regarding some of his critics: "They can kiss my
rear end, assuming they can reach that high from the low road that
they are travelling on!"

Seeya, Ralph!


 |||   How Many Colors?
 |||   By: Ken Baum
/ | \  GEnie: KEBAUM

This file is for the SPECy heads, like myself, who love to count
things and compare.

So you downloaded those JAGUAR screenshots and were wondering how many
colors were actually in those pictures. After all, 24-bit color is
more than most of us have on our computers. So I ran those pictures
through a graphics program that had the ability to count "unique
colors". Below is a list of the files and the number of different
colors in each screen shot. I cannot vouch for the accuracy of the
counts, but the program I used costs $220, so I would hope it was
reasonably close. Remember, most of the files were in the 320x200ish
range, so that there are approximately 64,000 pixels per screen (give
or take 10,000 or so).

Archive:                 FILE:               COLORS:
TT_TRGAS.ZIP             TOONRING.TGA        2084
    "                    AT_L1.TGA           10673
    "                    AT_BEAM.TGA         21315
    "                    AT_ROCK.TGA         28528

KN_TRGAS.ZIP             NINJA_1.TGA         18882
    "                    NINJA_2.TGA         17598

RA_TRGAS.ZIP             RAIDEN_1.TGA        393
    "                    RAIDEN_2.TGA        203
    "                    RAIDEN_3.TGA        151
    "                    RAIDEN_4.TGA        178
    "                    RAIDEN_5.TGA        251
    "                    SNAP_1.TGA          220
    "                    SNAP_2.TGA          239
    "                    SNAP_4.TGA          260

So far, I'm impressed with what I've seen and heard. I would like to see
some shots from the 3D games. How about it Bob?

//// Editor's Note: This originated as a message on GEnie's ST
//// RoundTable. I thought it was interesting enough that I asked
//// Ken's permission to use it in this issue. Ken told me that he
//// later looked at the Evolution Dino-Dudes Targas, "Their colors
//// all came out in the 200-400 range, similar to Raiden. I can't
//// wait to get a hold of a Jaguar."
//// Me too, Ken.


 |||   News from Usenet
 |||   By: Timothy Wilson
/ | \  Internet: WILSONT@RAHUL.NET    GEnie: AEO.8

Ah, the news started to pick up again, so here's another installment
of news from Usenet. There's been a bunch of Jaguar speculation, but
its just that, speculation. More Falcon030 users are popping up, and
there's been talk of creating comp.sys.atari.falcon, or maybe
comp.sys.atari.tos, but no formal vote as yet.

So let's dig into the news!

//// Apple Talk Driver at last?

{} () (no name found) plans on writing a real Appletalk
interface for those of you with the LocalTalk ports. A "sorta Mac LAN
selector, with file sharing and printing capabilities" If you'd like
to help betatest, email the author.

He says the final version will be freeware! Hot Dog!

//// Really Cool STe Demo

After Kiia Kallio {} posted about Aggressions
new demo, I D/L'ed it immediately and was blown away!

A neato opening animation, lots of splines, landscapes, and to top it
off a very fast (50fps claims Aggression) trip through a 3D city!

You can send your comments to:

Kiia Kallio
Lancelot of Aggression

The demo can be found at Atari archive of course, in the /atari/Ste

//// Uh OH! Virus on Works disks?!

Michael Olin {} claims to have found the "Signum"
virus on Speedo Disk #3. He found it on the 720k versions of the

Other users reported such occurances, also mentioned are System disks
from Apple have been shipped with viruses as well. The point is, it
can happen to anyone in the industry, even the big guys.  Its always a
good idea to inspect disks with a virus checker, no matter the source.

//// MiNT and NVDI

Ofir Gal {} replied to a post about
problems with NVDI.

Ofir states that versions 2.03 and 2.50 work with MTOS, while 2.11
doesn't.  He also posted some stats on NVDI 2.5 and a Falcon:

"Here are some stats when using NVDI 2.50 on a Falcon. When MTOS is
present there is a 5% slowdown on most VDI calls."

GEM Bench v3.09             = Ofir Gal 30.7.93
Falcon 030 TOS 4.04, MiNT not present
Blitter Enabled, NVDI 2.50 present
Video Mode = 880 * 656 * 2 Colours
LineF FPU installed
Run and Malloc from STRAM
Reference = F030 + FPU
GEM Dialog Box:            1.715    227%
VDI Text:                  0.435    881%
VDI Text Effects:          1.120    741%
VDI Small Text:            0.600    710%
VDI Graphics:              2.605    356%
GEM Window:                1.050    145%
Blitting:                  1.025    112%
VDI Scroll:                1.265    225%
Justified Text:            1.980    183%
VDI Enquire:               1.010    170%
Graphics:                            375%

//// Mighty Sonic Falcon Accelerator Info

Mighty Sonic, no RAM. DM 1920

The Mighty Sonic does allow up to 128 MB Fast-RAM and has a VME-bus
connector. FPU is not included. (50Mhz 030) There is also an Eagle
Sonic board at DM 700 (33Mhz 030)

But: Mighty Sonic does not fit in your FALCON case! You'll have to put
the board into a tower case.

There's a (ST-) RAM-board available now, where you can put 1, 4 or 16
(14 used) MB SIMMs onto. Price in Germany: DM 199.

These products are made by GE-Soft. Yep, this is the Falcon030
accelerator you've been hearing about from CeBit.

There was a posting about a mutant TT with a 50mhz 030, (the whole board)
that GE-Soft also makes, other posts sugguested that it's an on demand
product, or may not ever see production. It'd be best to talk to GE-Soft

Landgrafenstrasse 37
53842 Troisdorf-Oberlar

//// Falcon030 vs Sparc's and HP's playing MPEG's

{} (Mike Gassmann) wrote about MPEG speeds
to which {eberl@Informatik.TU-Muenchen.DE} (Michael Eberl) replied
with his own experiences.

A Sun Sparc Station 10, using a PD mpeg player, decoded an MPEG at 3.5
frames a second.

As I've written in a previous Usenet article, the Brainstorm MPEG
decoder runs at 15fps!

The DSP in the Falcon030 has a certain very fast instruction that can
simultaneously perform one 24x24->48 bit multiplication, one
48+56->56bit addition, TWO parallel moves including reverse carry
adressing mode. All in two clock cycles. It's also using fixed point
math, which is faster than floating point math used on the SS10.

And against the HP? Well, the HP won, at 22fps.

What I don't understand is, if MPEG's are so hard to display (an 50Mhz
HP 9000/720 Apollo is needed for 22 fps?!) whats all the hoo-haa
about? Yeah, ok, they can compress video really tiny, but it seems to
be quite a trade off. On the other hand, there are MPEG decoder
boards now that really pump the stuff out. (Atari has annouced one
for the Jaguar!)

//// Dungeon Master II; Eeek! no ST version?!

Interplay is creating Dungeon Master II, and guess what platform it'll
be released on? Yep, the clones.  If you would like to see a ST
version, why not bug Interplay at:

Interplay Productions
17922 Fitch Avenue
Irvine CA 92714
Tel:    800-969-GAME
BBS:    714-252-2822

//// MiNT 1.08 Sources (and other MiNT goodies) released

A new version of MiNT (source code only), has been sent to
Atari.archive. Eric Smith can do this ONLY as a source distribution,
and distribution of the binaries is forbidden.

Eric says that he's allowed to distribute it this way, so only
experienced programmers can compile it, and in effect gain more
testers for MiNT.

Don't use GCC 2.4.4 to compile it, it contains some minor bugs that
crop up at the most inoppertune times, avoid this version.

If you are in the know about compilers, and you do get it compiled
OK, simply replace your current MINT.PRG with this version.

New MiNTLibs also appeared as well, the newer the better.

All of this is availible in the /atari/Mint directory on

//// New GemView, V2.42.

I'll keep this post intact:

----8<---Snip snip--------
From: (Dieter Fiebelkorn)

NOTE: The DSP-JPEG-Decoder (written by BrainStorm) is a commercial product
      and must be licenced by ATARI.
      The DSP-JPEG-Decoder is not a part of the GEM-View software, but if
      enough users are interest in this software I can buy this licence and
      sell this software to any who are interested! (At the moment only 4
      people have send me a mail, THIS IS NOT ENOUGH!)

 - [2.42]:
    o loads XGA images

 - [2.41]:
    o small changes
    o Test between DSP-JPEG (Brainstorm) and MC68030 (Falcon030/16MHz)
      NOTE: The followed times are combinations of load and decode.
            For pure decoding the DSP is 10 to 14 times faster!
      Loading and decompression time (no processing by GEM-View):
                                               DSP-JPG     MC68030
      BV17.JPG    :  588 x 800 ( 84910 Bytes)  0'06.3" vs. 0'48.5"  (7.7)
      PLAY2.JPG   :  800 x 600 ( 87645 Bytes)  0'06.5" vs. 0'44.3"  (6.8)
      PLAY1.JPG   :  800 x 600 (106525 Bytes)  0'07.0" vs. 0'46.9"  (6.7)
      BLACKTIP.JPG: 1219 x 838 (124990 Bytes)  0'11.2" vs. 1'23.9"  (7.5)
      QUEENXBI.JPG: 1270 x 420 (170776 Bytes)  0'09.2" vs. 1'05.2"  (7.1)
      - NOTE: (min)'(sec).(msec)"

 - [2.40]:
    o loads now PCD (Kodak Photo-CD images) with format BASE/4 or BASE
    o uses the DSP-JPEG-Decompressor written by Brainstrom, if installed.
    o Quick 90, 180, 270 degree rotation.
      In Monochrome(ST/Mhz): up to 266666 Pixel/sec (90, 270 Grad)
                             up to 948148 Pixel/sec (180 Grad)
    o Online Rotate  : | Options |                    |
      (in Window-menu)           | Rotate +90  <ALT>M |
                                 | Rotate -90  <ALT>N |
    o Online Brighten: | Options |                     |
      (in Window-menu)           | Brighten +5% <ALT>( |
                                 | Brighten -5% <ALT>) |
    o Bug fixed in loading True-Color-XIMG's

//// TCP/IP code for your Atari

For those interested int TCP/IP software and code, Usenet sugguests: ( /pub/atari/telecomm/tcpip/*

//// HP printer tidbits

One user was having problems getting his HP deskjet plus to talk to
his STe. Our own Ed Krimen sugguested to make sure your Deskjet is on
before you reboot.

Another user asked about HP Laserjet II's (compatibility), Ben Gilbert
{} sugguested (along with praise for Atari
Works and Speedo GDOS), that the "HP LaserJet" driver that comes with
Speedo works just great.


 |||   Andreas' Den
 |||   By: Andreas Barbiero
/ | \  Delphi: ABARBIERO     GEnie: AEO.2

//// A Tall View from a Small Land

Since the last time I wrote, the Navy has sent me far and wide in my
travels. I have been to Japan, Korea, Singapore, Austrailia and
Thailand. The most stunning thing to me is how very different everyday
happenings are between countries and cultures, yet at the same are so
much alike in other ways. The biggest differences that I have noticed
so far is that nobody eats bread over here, Aussie girls will hit you
for 'pretending' to be American, (they think you are faking the accent
in order to more easily pick them up) and most of all it is perfectly
normal to charge twelve dollars for a beer. In Singapore we were
charged over twenty dollars for a small pitcher!

//// Patti's note: As his wife, I want to know what he is doing trying
//// to pick up Australian girls!! Just wait til he comes home!

With the world economy doing the things that it is, computers can
become quite an expensive pasttime. We all seem to want more with our
hobby. Prices over here are not as cheap as I expected. Memory chips
can be much less costly than back in the states, but forget about hard
drives. Figure on about 2x the cost of what the same drive will cost
you back in the States. Even in Singapore, some components are really
costly, but oddly enough I saw a Mac Powerbook for about 20% less than
it would cost in the U.S.

The typical dominance of the clone is highly rampant, and with the low
cost of motherboards, some really cheap systems can be built. But no
matter how tempting the prices, I still get that reality check (more
of a mule kick) every time I am around a clone. My roommate has a
typical '486 system, and while I cannot buy any software for my TT030
at the base exchange, he spends more time tweaking with the darn
thing than using it. Several times his BAT files have gotten screwed
up, and disinstalling Windows programs is an arcane art. To shock him,
I disconnected the hard drive and booted from a BLANK floppy. OK, so I
did not have Warp 9 and SpeedoGDOS, but I did have a fully usable GUI
and could load up my old standby Wordwriter ST and write a letter. He
is still trying to figure out how to get his CD-ROM working with his
sound card.

I must say that this machine has been a lifesaver over here,
notwithstanding lending it to let other people write letters. MY
sanity has been preserved (well the little I have left) and I finally
managed to win Chaos Strikes Back, and get a 99% score on Civilization
at the hardest level. For the use of the machine, thanks Bob! I wanted
to get online out here, but without spending my family into living on
the streets, I was depending on getting an Internet account set up
over here. Well, I got the permission, but the Air Force is seemingly
impotent when it comes to getting their hardware up. Their VAX is
really kicking their butt. I don't pretend to be a UNIX god, but c'mon
guys, three months and several million dollars in computer gear and
you STILL can't get it to work?  It just could be rivalry, we're Navy
and they HATE us here... we get to leave! Who knows, in 12 weeks I
will be home, and in 11 weeks they will have it working.

//// NeXT Step or Stumbling Stone?

I just read about the official release of the NeXT OS for the clone
platform. $795 will buy a CDROM full of everything you need to get
started. Now the OS is nice, since it is object oriented, it has
enormous flexibilty, and it is better than  Windows and TOS. For $800
it should. A while back people were wondering if there was going to be
an Atari release of NeXTstep. It would be nice, but without a $750
rebate, I probably wouldn't buy it. It could run on a Falcon030, but
with system requirements of 16 megs of RAM, 120 meg harddrive and a
CDROM, I can wait for Atari's '040 machine. The same article stated
that 24 megs of RAM and a 200 meg hard drive is more practical for day
to day usage. At $20 a megabyte that's $480 for RAM alone.

I think I will stick with TOS and its little helpers.

//// How Small is Small?

The Pentium, highly touted, is interesting but is showing some flaws,
with its design as well as in its marketing. The actual architecture
of the chip is a step up from the previous 80X86 series chips. An
advanced FPU (math coprocessor for floating point operations) with
specific circuitry for addition, division, and multiplication,
parallel five stage integer pipelines, separate instruction and data
caches and internal and external 64-bit data pathways has been
designed into the chip. All this sounds very nice on paper and
produces some good looking benchmark tests, but there is a fly in the

Not only are there some serious thermal problems, but the chip is not
as advanced as Intel would like us to think. The performance of other
chips like the DEC Alpha, and the PowerPC are rattling the cage of the
Intel Inside label makers. Based on a .6 micron design these chips
produce less heat and use less power than the relative behemoth .8
micron design of the Pentium. Maybe the delays and initial small
shipments of the Pentium reflect an intent to redesign the chip.

The '486 will be the cash cow for Intel for a while, most users would
relish the extra power of the Pentium, but the machines that will be
using the Pentium are not targeted for single user systems. Windows NT
is not for the single user, and basically, where they are counting on
the money being is not with the personal computer user. The average
Pentium machine will be in the $5000 and up range, and most personal
computers bought, top out at about $3000. This may be a good thing. A
very good thing. If people start thinking that there are OTHER things
out there to own besides a Intel clone, then we all have a chance. It
was a long time coming, but the heydey that was the computer market of
the early '80s may be coming back. Things just may get interesting


 |||   Developing News
 |||   Interesting items from TOS platform developers and supporters
/ | \  ------------------------------------------------------------------

//// STraight FAX! 2.0

STraight FAX! has been a leading Atari FAX software package since its
introduction in April of 1992. But since then, we've added a host of
features that make it easier to use, more accessible and more

Now, with the release of STraight FAX! 2.0, popular Class 1 and Class
2 FAX Modems are fully supported. This means that STraight FAX! is
compatible with a wider range of FAX Modems that ever before,
including less expensive Class 1 Only FAX Modems and high end Class 1
and Class 2 FAX Modems.

Support for Class 1 also means greater compatibility and reliability
with remote FAX devices, so you can FAX around the world without

We've also added features to make STraight FAX! 2.0 a joy to use.
Like a Quick Dial feature, for sending FAXes to locations that you
don't plan on FAXing every day.

Or you might like the new STraight FAX! Manager for seamless, system
wide FAXing from your favorite applications, including Pagestream,
Calligrapher 2/3, That's Write 2, Calamus, and Speedo GDOS based
applications such as Atari Works. Just create a document using one of
the applications above, select the special STraight FAX! "Print to
Disk" driver from the application's printer driver selector,
(optionally activate the STraight FAX! Manager CPX to select the
path/filename for the generated FAX files), and print the pages of the
document from the application's print command.

If you are using MultiTOS, you can have STraight FAX! sitting by idle
and ready to send the generated FAX without quitting the application.
Just tell the STraight FAX! Manager to send the FAX and the STraight
FAX! pops up with all the generated FAX files ready to go!

Normal TOS users can quit the application, run STraight FAX! and it
will automatically find the generated FAX files and be ready to send!

Don't wait another day to discover the FAX revolution. It's here and
working now on your Atari computer. Get it straight with STraight FAX!

STraight FAX! 2.0 Features ==========================

y Send and Receive FAXes using any Class 1 or Class 2 FAX Modem.

y Send FAXes using a SendFAX Modem.

y Print Received FAXes to any GDOS supported printer.

y Export FAXes to Image, PCX or Encapsulated PostScript (EPS)
formats. EPS files can be printed directly from the GEM Desktop to a
PostScript printer or printed with a PostScript Interpreter.

y Send ASCII Text, Mono Image, High Rez Degas/Degas Elite, Mono PCX,
GEM Metafiles, First Word, First Word Plus, Word Writer ST and FAX

y Broadcast FAXes to up to 100 Destinations.

y Schedule FAX transmissions at a later time (up to a year in advance).

y Quick Dial feature allows entry of a FAX name/number on the fly for
infrequent destinations.

y Manual Send and Receive features allows inititiating a FAX Send or
Receive from a voice call.

y Supra FAX Modem Caller ID support.

y Caller ID/Remote FAX ID can be used to reject incoming "Junk" FAXes
from a user defined list of Bad FAX callers.

y Direct scanning from within STraight FAX! via the ScanLite Desk

y Automatic merging of left and right scans from a hand scanner when
used with The Tray scanning tray.

y Full Page direct scanning support for the Navarone/Canon IX-12
series scanners with our optional driver ($19.95).

y View up to 7 Image, Degas, PCX, GEM Metafile or FAX files at a
time, each in a GEM window.

y Enhanced Image editing/processing features such as copy/paste a
defined clip area to/from a selected file or the Atari Clipboard,
Clear/Invert/Thicken a defined clip area, Reduced (50%) View and
Enlarged (FAX page size) view, Clean Up stray pixels, Rotate and Flip
Image and Draw/Erase pixels.

y Supports enhanced user interface features on Falcon TOS 4.02+ and
MultiTOS such as 3D buttons and sliders and Hierarchical drop down
menus. Supports MultiTOS features such as Drag and Drop and Iconifying

Enhanced FAX Send and Receive Logs now contain additional information:

  - Date and Time of transfer.
  - Name of destination (send) or Comment (receive) which may be
    edited by the user to allow annotation of the logs.
  - Destination FAX Number (send) or Caller ID (receive).
  - Remote ID string from destination FAX.
  - Name of first FAX file sent or received.
  - Transfer attempt number (send only).
  - Total pages sent or received.
  - Duration of transfer.
  - Resolution of transfer (Normal or Fine).
  - Established baud rate of transfer.
  - Cover Page sent (send only).
  - Modem Type (SendFAX, Class 1 or Class 2).
  - Status of transfer.

The detailed FAX Send or Receive Log information for an entry may be
printed to a line printer or copied to the Atari Clipboard.

FAX Receive Log Management Commands:

  - View FAX.
  - Print FAX (via GDOS).
  - Rename received FAX files.
  - Delete received FAX files.
  - Export received FAX files to Image, PCX or EPS files.

"Print to Disk" drivers included to print pages of a document from
with the following applications:

  - Pagestream 1.8x
  - Pagestream 2.x
  - Calamus 1.09x
  - Calamus S/SL
  - That's Write 2.xx
  - Calligrapher 2/3
  - Original Atari GDOS based applications (GEM Output, Migraph Outprint)
  - Atari FSM/Font GDOS based applications (WordFlair II)
  - Atari Speedo GDOS based applications (Atari Works)

The STraight FAX! Manager (Auto Folder TSR and CPX Module) simplifies
the "Print to Disk" of FAX files from an application. The STraight
FAX!  Manager allows the user to name generated FAX files and it keeps
track of them and communicates with STraight FAX! to automatically
enter the generated FAX files into the File List in STraight FAX!.

Support's Supra's Silent Answer feature to allow single line Voice/FAX

Enhanced Atari Clipboard support:

  - Paste Image, GEM or ASCII Text from the clipboard into a defined
    clip area in a window. Pasted Image files may be scaled to fit
    into the clip area with or without preserving the aspect ratio.
  - Copy a clip area defined in a window to the clipboard.
  - Copy/Paste text fields from the Cover Page to/from the clipboard.
  - Copy detailed FAX Send/Receive Log Information to the clipboard.

Context sensitive on-line Help available with the Help Key or "?"
button in dialogs.

Over 60 user selectable parameters such, including the new:

  - Quick Dial dialog enable.
  - Time Format (12 or 24 hour).
  - Desktop color and fill pattern.
  - Prompt on File Overwrite.
  - Default ASCII Text File Extension.
  - Default File Path for Image, Degas, PCX, GEM, ASCII Text,
    First Word/Plus and FAX files.
  - GDOS Print Quality (Final or Draft).
  - Tab Width in ASCII Text File conversion.
  - Local Area Code.
  - Maximum AT command size (for newer FAX Modems that suppport 255
    character command buffer).
  - Auto Baud parameter for FAX Modems that support automatic baud rate
  - Caller ID parameter for FAX Modems that support Caller ID detection.
  - Clipboard Image Paste options for scaling, preserving aspect ratio
    and expanding clip area to fit.

Optimized FAX import and export routines to reduce conversion times.

Load and Save user preference files to change the entire system
configuration on the fly.

Run an external text editor from within STraight FAX!

Enhanced Dialog User Interface:

  - Popup Menus and Check boxes to ease setting user selectable
  - "Fly Dial" dialogs can be dragged to any position on the screen.
  - Enhanced text edit field key commands.
  - Keyboard equivalents for button selection.


STraight FAX! 2.0 requires an Atari 520 ST, 520STFM, 1040ST, STacy,
Mega ST, STe, ST Book, Mega STe, TT030 or Falcon030 computer with a
minimum of 1 Megabyte of RAM. 2 or more Megabytes of RAM are
recommended for printing and viewing FAXes due to the large size of
uncompressed FAX images.

STraight FAX! will operate with TOS 1.00, 1.02, 1.04 (Rainbow TOS),
1.06, 1.062, 2.05-2.06, 3.05-3.06, 4.01-4.04 and MultiTOS. TOS 1.04 or
higher is recommended due to memory allocation problems on earlier TOS
versions. 4 or more Megabytes and a 16 MHz or higher speed CPU is
recommended when used with MultiTOS.

Due to the size of FAX files, a hard disk is recommended.

Printing FAX documents and importing GEM Metafiles requires a version
of GDOS and an appropriate GDOS printer driver. The original Atari
GDOS (and compatibles), Font GDOS, FSM GDOS, and Speedo GDOS are
supported. Font GDOS or Speedo GDOS are recommended. Importing GEM
Metafiles requires the MEMORY.SYS GDOS driver to be installed as
device number 61. Speedo GDOS is required to render text objects in
GEM Metafiles.

Ordering and Upgrades

Suggested List Price $109.95 (US)

Registered STraight FAX! users can upgrade to version 2.0 by sending
in their original master disk and $25.00 (US). Registered users who
have purchased STraight FAX! version 1.07 on or after June 1, 1993 can
upgrade to version 2.0 by sending in their original master disk and
$20.00 (US).  Upgrade price includes version 2.0 master disk, version
2.0 manual and shipping within North America. Upgrade orders outside
of North America, please add $5.00 (US). US funds only. Major Credit
cards accepted. Please allow 3-4 weeks for delivery (after the
official release date).

Please mail upgrade orders to:

 Toad Computers
 STraight FAX! 2.0 Upgrade Offer
 570F Ritchie Highway
 Severna Park, Maryland 21146 USA

For more information contact:

 410-544-6943 (Voice)
 410-544-1329 (FAX)
 410-544-6999 (BBS, 300-14400 baud, allow up to 60 seconds to connect)

 CompuServe: 73047,2565
 Internet: or

STraight FAX! is marketed for NewSTar Technology Management by  Toad
Computers and is distributed in North America by Eastern Front
Distributing Company and Pacific Software Supply.

All programs and products mentioned are trademarks or copyrights of
their respective companies.

//// Imagecopy 2

        :   CodeHead Software announces Imagecopy 2     :
        :     The Essential                             :
        :                Image Utility                  :
        :                       for Atari Computers     :

CodeHead Technologies is proud to bring Imagecopy 2 to North America.
This amazing utility was written by Jeremy Hughes for ST Club in
England. As with other products imported by CodeHead, Imagecopy 2
meets the high standard of excellence which CodeHead requires of its

//// Feature List

 y Copy images from the screen in any ST, TT, or Falcon video mode.
   Images can be copied by pressing Alt-Help, and a flexible
   rubber-banding system allows images to be selected with a fine
   degree of accuracy. Imagecopy 2 works with standard and large
   screens including virtual large screens.

 y Convert images to different formats. Imagecopy 2 reads and writes
   images in a wide range of formats, including Art Director, Degas,
   GIF, IFF, IMG, extended IMG, MacPaint, Neochrome, OS/2 bitmap, PC
   Paintbrush (PCX), RSC free image, Spectrum, Targa, TIFF, Tiny, and
   Windows bitmap.

 y View images in any ST, TT, or Falcon video mode.  Color-mapping and
   dithering are used to display images in video modes which contain
   fewer colors. Up to six images may be displayed simultaneously in
   GEM-window or full-screen display modes.

 y Print images and screen dumps in color or black and white on a wide
   ranges of printers, including 9-pin and 24-pin dot-matrix printers,
   Bubblejet printers, Deskjet and Laserjet printers. (Atari Laser
   printer is not yet implemented.) Imagecopy 2 can print true-color
   images containing over sixteen million colors, and offers print
   scaling, comprehensive color controls, and a choice of halftone

 y User-friendly GEM interface, including window menu, pop-up menus,
   and color sliders. Can be used as an accessory or stand-alone

//// Availability

Imagecopy 2 is available now - we have them in stock today, ready to
ship. Suggested retail price is $39.95. For more information,
contact your local dealer, or:

   CodeHead Software
   PO Box 74090
   Los Angeles, CA 90004
   Tel (213) 386-5735
   Fax (213) 386-5789
   BBS (213) 461-2095

//// Oregon Research

Continuing our commitment to bringing the highest quality
software to the Atari ST/TT/Falcon030 line of computers, Oregon
Research is pleased to announce the following new products:


Personal Finance Manager Plus is the perfect solution for home and
small business finance and accounting needs. An easy to use, mouse
driven, multiple windowed interface give you access to multiple
accounts, budgets, reports, and graphs. Automate your personal or
small business accounting with standing entries posted to multiple
accounts and review you financial progress with budget and spending
trend analysis. Compatible with all Atari Computers including TT and

Retail price: $69.95


3D Calc is a true 3-dimensional spreadsheet with an integrated editor
and programming language, graphics, and extended statistical
functions. Features include: 3D spreadsheets - 13 pages x 2048 rows x
256 columns, 3 spreadsheets open simultaneously; up to 3 windows per
spreadsheet; works in mono or color and supports all ST,TT, Falcon
resolutions; full version requires 1MB of memory but includes reduced
half-meg version; graphics module includes bar and line diagrams, pie
chart, multiple bar and line graphs, stacked bar graphs, function
graph; enhanced statistical analysis including averages and
distribution parameters, scatter diagram with best-fitting curve,
regression and correlation, and many more; easy-to-use GEM interface;
reads ASCII and Lotus 1-2-3 files; Compatible with all Atari computers
including TT and Falcon030.

Retail Price $54.95


Quartet is a 4-voice music composition and sound sample sequencer for
the Atari. It can run on any Atari ST or TT and does not require any
special hardware. Compose music on four scrolling staves by mouse
input or playing on a MIDI instrument. Choose from over 100
instruments and sounds included with Quartet, or import your own from
the Replay 16 or Stereo Replay sound samplers (sold separately). Up
to 20 instruments can be used in a piece of music. Play back through
your television, monitor, Replay 16 or Stereo Replay's sound sampling
cartridge. Digital processing is available for manipulating samples.
Routines are included for playing songs from GFA or Hi-Soft BASIC 2,
C, or assembler.

Retail Price: $79.95

Replay 16

The first low cost 16-bit sound sampler for the Atari ST. The
hardware cartridge contains 16-bit Analog to Digital, and Digital to
Analog converters. The system can record from any suitable sound
source such as CD player or any 'AUX' or 'Line" level signal source
through the stereo phono inputs. Stereo phono outputs are provided
for playback to an amplifier of mixer. The Replay 16 Editor software
is fully desktop and window-oriented, allowing samples to be loaded
and edited separately. The editor contains many sophisticated editing
and effects commands as well as a sample track sequencer, and MIDI
sample dump. Drumbeat 16, included, is a fully configurable
sample-based drum machine. MidiPlay 16, also included, transforms
your ST into aflexible multivoice MIDI keyboard emulator. Samples can
be assigned to any individual note or range of notes in a 9 octave
range. Replay 16 is fully compatible with Breakthru software.

Retail Price: $249.95

Stereo Replay

High quality stereo sound sampler and output cartridge for the Atari
ST range of computers. Record in high-quality stereo from twin phono
input sockets. Twin phono outputs provide the user of a standard ST,
STF, STFM, or Mega computer with high-quality stereo output. Atari
1040STE, Mega STE, and TT users may play samples through the stereo
outputs in their computers. Included is the advanced Stereo Editor
software, allowing the user to load 8, 12, or even 16-bit samples in
mono or stereo formats, and freely convert between them. Sample
translations are handled automatically, allowing effortless
cut-and-paste between sample types. Powerful editing functions
include looping and cross-fading, as well as effects. The Stereo Beat
program allows "kits" of samples to be loaded and sequenced, and
responds to MIDI start, stop, and sync commands. Includes routines
for playing samples from assembler, or high-level languages.

Retail Price: $169.95

Stereo Master

A low cost, high quality, 8 bit stereo sound sampler. The sampler
cartridge plugs into the cartridge port and allows you to sample and
analyze sounds input from any stereo source such as CD players,
modify the way they sound with real time effects, or save them to
disk. With powerful editing software, Stereo Master provides all of
the power and flexibility you would expect in a professional audio
editing suite.

Retail Price: $79.95


Integrated personal multimedia Video and Audio sampler for the Atari
ST. Digitize monochrome, grey scale or color images at up to 30
frames per second and combine them with sound from the integrated
sound sampler. Easy to use editing and video sequencing software
allows the easy creation of your personal video movies complete with
sound. For all Atari ST,STe, and TT computers.

Retial Price: $139.95

Sequencer One

A high quality low price MIDI sequencer that's ideal for the beginner
or semi-professional user. Full MIDI capabilities with support for
four channel sample replay through the computer's own sound output (in
stereo where supported). Sample replay can be done at the same time
as playing MIDI instruments. Step time entry over MIDI or from
computer. 32 tracks. Track and cue sheet screen. Individual note
editing screen. Music arrangement page. Powerful global editing
options (e.g.; quantize to correct timing).

Retail Price: $39.95

Sequencer One Plus

All the features of Sequencer One, plus many more! Includes
revolutionary Diamond Drag note editing system (" far the
easiest grid edit system I've seen..." --Ian Waugh, Music Technology
review). Unique juke box page allows up to 32 songs to be chained
together into an "album" or "live" performance. Also provides tempo
map screen, extra sample replay facilities (e.g.; external 8-bit
sample replay cartridge support on Atari), MIDI sysex handling,
additional global editing options, and much more! ST Review's
"Essential Buy". A 1.5 hour instructional video is included to help
you get the most out of Sequencer One Plus.

Retail Price: $169.95


A 64 track professional MIDI and sample sequencer. Includes all the
features of Sequencer One Plus, and in addition: conventional music
score notation, dedicated drum editor page, simultaneous multi-track
recording, sample palette screen, and much more! Breakthru also has a
unique advantage over other programs; at the same time as triggering
MIDI instruments, it can play back high quality 16-bit samples through
a Replay 16 sampler plugged into the cartridge port! As with
Sequencer One Plus, but with superior results, 8-bit samples can be
played through the computer's own audio hardware or through a range of
8-bit sample replay cartridges. ST Format magazine recently awarded
Breakthru their highly-prized "Gold Award", to add to the "Future
Music Platinum Award" already received! A 1.5 hour video is included
to help you get the most out of Breakthru.

Retail Price: $349.95

Breakthru Plus

All the features of Breakthru, but supports 32 MIDI channels instead
of 16. Very handy for users with more than one MIDI instrument.
Includes a hardware interface which plugs into the modem port,
providing an extra MIDI output socket.

Retail Price: $399.95

The Hit Kit

Music composition system and ideas generator to use with Oregon
Research sequencers. Create professional rhythm tracks, bass lines,
and other accompaniments in a range of popular styles. Mix and match
to easily produce complete MIDI sequences. An ideal way to learn.

Retail Price: $49.95

The Sample Series

A collection of 8-bit digital sound samples for use with Oregon
Research sequencers and some other programs. There are five volumes
in the series: Percussion & Effects, Guitars & Strings, Brass &
Woodwind, Synth & Vocals, Piano & Keyboards.

Retail Price: $19.95 each, All 5 for $79.95

For more information contact:

Oregon Research
16200 SW Pacific Hwy., Suite 162
Tigard, OR 97224

Ph:  (503) 620-4919
FAX: (503) 624-2940

Genie: ORA

//// Raystart

Lexicor Software is extremely proud to announce the release of
RAYSTART in the U.S.A. It comes, naturally completely in English and
is one of the best Raytracers around on the Atari Platform.

Check out some of the Raytraced Images of RAYSTART in our Lexicor
Graphics Library.

Ray tracing allows you to produce near-photorealistic images and
animation. The ray tracer can accurately model such lighting effects
as shadow, reflection and refraction, magnification, mirrors, and
textured surfaces.

It is a lovely addition to our family of Graphics Software. Perfect
for use in Presentation, Multimedia, Animation maybe and definately

It has a built in Editor very similar to CAD-3D2 from Antic and is
3D2 file Compatible which means that you can use your Cyber Models
(3D2) with it.

I will quote Godefroy de Maupeou from the French Magazine ST-Mag.
(translated from French into English)

"Raystart 1.0 is a big surprise. For a price that is usually for
small Utilities, it is an extremely powerful Raytracer and very easy
to use!"

            --   Godefroy de Maupeou

In the same article he said:

"Raystart is extremely fast, judge for yourself. A Sphere in 160x120
mode TIF with the raytracing option, a mirror of 100% and one solar
light takes 22 Seconds, without antialiasing, 57 Seconds with
antialiasing set to 1 (Four rays per Point rather than one)."

He however failed to mention the testing conditions, as RAYSTART
v.1.0 has no Math Co-Processor support these times are extremely fast
for any raytracer, may it be for a TT, Falcon or just a plain ST.

So how do I make a 3D Design and Raytrace it?

- Load or make an Object

- Confirm th Object for Output

- Choose a Color for your Object

- Choose a Texture

- Choose its attributes (when a ray of light hit's th Object)

- Position the light sources

- Position the Camera

- Select the method of calculation

- While an object is raytraced you have the option to interrupt it
  and continue later on

Positioning the Camera can be done using either a Coordinate System
just like PHOENIX or a point and click interface like CHRONOS.

Parallel, Point, Ambient and Spot light sources

Additional options for Interpolation, Mirror, Transparency, Convex,
Reflections, Shine, Texture, density, antialiasing and more.

Functional and Analytical Objects.

Intuitive Point and click Graphical User Interface, very easy to use.

The Textures Menu have four different types of color deviations (if
that is the right word): Block, Rings, Spherical and Striped. Each one
of these Textures can be parametrised with a dozen other features,
including the random functions. I won't go into detail of each those
other functions as they are too specific.

Distortion Raster

The built in Editor allows you to change or distort a previously
defined Object via a mathematical funtion which can be user-defined.

System Requirements:

Any Atari ST, STE, Mega, TT or Falcon.

Price: 99 U$D

Availability: GERMAN version Raystart 1.0, NOW

              ENGLISH version Raystart 1.0, September 1993

Does not include Shipping and Tax.

Please contact

1726 Franzisko Street
Berkley, CA 94703
Tel: (510) 848-7621 - Fax: (510) 848-7613

//// Cyrel Catalog Disk

              ._____.  __     __ .______.  .______. ._.
             / .___. \ \ \   / / | .___. \ | .____! | |
             | |   !_!  \ \_/ /  | !___! | | !__.   | |
             | |   ._.   \   /   | .__. ./ | .__!   | |
             | !___! |    | |    | |  \ \  | !____. | !____.
             \._____./    !_!    !_!   \_\ !______! !______!

  ._____.       __   ._________.   __      ._.       .____.    .______.
 / .___. \     /  \  !___. .___!  /  \     | |      / .__. \  / ._____!
 | |   !_!    / /\ \     | |     / /\ \    | |      | |  | |  | |  .__.
 | |   ._.   / /__\ \    | |    / /__\ \   | |      | |  | |  | |  !_ |
 | !___! |  / ______ \   | |   / ______ \  | !____. | !__! |  | !___! |
 \._____./ /_/      \_\  !_!  /_/      \_\ !______! \.____./  \.___/!_!

   ._____.  ._.  ._____. ._.  __       .__   ._. .______.         _.
   | .__. \ | | / .____! | | / /       |  \  | | | .___. \       / |
   | |  | | | | | !___.  | |/ /        | . \ | | | !___! |      /_ |
   | |  | | | | \.___. \ | |\ \        | |\ \| | | .__. ./       | |
   | !__! | | ! .____! | | | \ \       | | \ ! | | |  \ \  ._.   | |
   !_____./ !_! !_____./ !_!  \_\      !_!  \__| !_!   \_\ !_!   !_!


Cybercube Research is pleased to announce the introduction of the
CyReL Catalog Disk. This electronic catalog allows an easy selection of
the 30+ products offered by Cybercube.

The disk contains numerous files, including product overviews,
ordering informations, demo programs and scanned images and screen
shots depicting the CyReL quality tools. Take advantage of special
offers, lower prices as well as special package deals. Order your copy

The CyReL Catalog Disk comes either on two 3.5" 720 KB disks or one
3.5" 1.44 MB HD disk. Several compression techniques have been used in
order to reduce the megabytes of data. We recommend the use of the
latest versions of *.LZH and *.ZIP decompressor utilities to review
all the files and data contained on the CyReL Catalog Disk. Use a
*.JPG compatible image viewer to enjoy the 24-bit graphics.

To order your own copy, simply send U.S. $5.00 or Cdn $5.00 (Cheque or
Money Order) for shipping and handling, and we will be glad to send
you the latest, most current edition of the CyReL Catalog Disk. Please
indicate your preferred disk format.

As an added bonus to our customers, you will be able to deduct this
fee from your next CyReL order.

       ... expand your imagination!


/// High Quality 24-bit Rendered Images, Photographs and Scans:

Have a close look at our graphics cards series. Our detailed 24-bit
pictures will give you a first impression about these feature-packed
boards. Sample the awesome quality and beauty of 16.7 million color
graphics. Enjoy the best renderings used in promotions and dealer

/// FREE Working Demos of the CyReL Productivity Utilities:

Bundled with help files, icons and documents, these demo versions of
our popular utilities series will get you up and working in no time.
Experience the difference when handling a industry standard MS-mouse
or PC-Mouse under GEM, digitize in a snap with a graphics
tablet/digitizer directly on your Atari, customize your color palettes
like never before or simply have a look at the comfort and ease of
installing a CyReL M16-1280 True Color High Resolution Graphics Card
in your system. Get the most out of your system with the quality tools
from Cybercube.

/// Latest News and Press Releases:

Updated information regarding the current offerings and new special
pricing for various CyReL products. Read about the latest
developments, updates, feature lists and learn about EQUINOX, the
official support BBS for CyReL products.

/// Technical Specifications:

Get all the details. First hand, clear and informative. Take advantage
of inside tips, explanations and technical overviews.

/// View the CyReL Brochures on your Screen:

For added comfort, ease of use and to support our efforts to reduce
junk mail, you can now review the CyReL Product Brochures right on
your screen, at your own pace and leisure.

/// Screen Shots for Better Comparisons:

Have a look at the features, appearance and menus of our software
packages. Simply display these screen shots and see it for yourself.

/// Printable Order Forms:

For your convenience, simply print out the provided forms, complete,
and mail in your order. We will do our best to accurately process
them, for fast, friendly and dependable service.

Should you require more information, please contact us at the
addresses listed below:

Cybercube Research Limited
126 Grenadier Crescent
Thornhill, ON, L4J 7V7, Canada

Tel  (416) 882 0294  after Oct. 4, 1993   (905) 882 0294
Fax  (416) 886 3261                       (905) 886 3261
BBS  (416) 882 5895                       (905) 882 5895

CRS-Online: cybercube.research

UseNet/InterNet: or


ATARI UNITED! announces an expansion of their campaign to find
isolated Atari TOS computer owners. The focus of ATARI UNITED! is to
provide information to the Atari user community, especially the
isolated owner. To aid in this effort, ATARI UNITED! is calling for
volunteers to make their address and phone numbers available to anyone
in need of support living in their local area. Anyone wanting to join
this growing network should register with ATARI UNITED! and specify
that their information be made available to any individuals contacting
the organization in search of local support. ATARI UNITED! is urging
that mainstream users, especially those using commerical and private
online/bbs services, offer their time and support by registering.
Although ATARI UNITED! is endorsed by Atari Corporation, ATARI UNITED!
is independent of Atari Corp. Use of the Atari name is by permission.

For further information, contact:

Patti Barbiero                               Gordie Meyer
P.O. Box 691                                 P.O. Box 1982
Mountain View, CA 94042-0691       or        Ames, IA  50010-1982
(415) 903-9787                               (515) 232-1627               


To register, please provide the information below, and mail to:

                          ATARI UNITED!
                           P.O. Box 691
                  Mountain View, CA  94042-0691

or email your registration, questions, comments, etc to:


Name (Last, First, MI):  _________________________________________
Mailing Address:         _________________________________________
City, State, Zip:        _________________________________________
Phone Number:            _________________________________________
Online Address:          _________________________________________

Computer Model:          ___ 520 ST     ___ 520 STe    ___ TT
                         ___ 1040 ST    ___ 1040 STe   ___ F030
                         ___ Mega ST    ___ Mega STe

Computer Serial Number:  _________________________________________

User Group (if a member):________________________________________

(     ) Yes!  Please include me in your list of possible  contacts
for isolated Atari TOS owners in my area.

(      ) Also please make my name and address available  to  other
Atari related concerns.

(     ) Please  keep  all information  on  my  registration  form


//// Megatype Upgrades

The long awaited upgrades to ALL of our software are about done.
Falcon / MultiTOS / all resolution compatible versions will be
shipping within the next 60 days. The whole lineup, including
FontVerter, Font Designer PLus, MegaKern, Bitmaker, and Type 1
Converter/True Type Converter will all have new versions. (yes you did
read True Type Converter!) The new version of Type 1 Converter will
now also include conversion of True Type fonts from Windows into .ECF
format, which can be loaded into Font Designer Plus, or converted to
CALAMUS or PAGESTREAM formats with FontVerter.

We have tried to add all of the suggested ideas all of you users have
come up with into the various programs. Registered users should be
watching your mailbox for information and pricing on the upgrades,
plus information will be available online as the upgrades are ready.
Running Designer, FontVerter, Type 1 CVT, and the others all at the
same time under MultiTOS (memory permitting) is a GAS, really a GAS.
(sorry about that. I'm listening to an old Humble Pie Live album as I
write this and it just came out!)

MegaType SoftWare
P.O. Box 645
South Bend, IN 46624


 |||  Shutdown ............................ Power off, EXIT, BYE, Logoff
/ | \ ------------------------------------------------------------------

We welcome feedback from all of our readers; feedback both positive
and negative. Whatever you think of our efforts, we sincerely would
like to know. Our EMail addresses are sprinkled throughout each
issue - with the new Internet gateway into GEnie, you can reach us
through the Internet also. Append "" to any of our
GEnie addresses.

Until the next issue of AEO, I remain,
Your Editor
Travis Guy


                (This issue printed on recycled photons)




Atari Explorer Online Magazine is a bi-weekly publication covering the
Atari computer community. Material published in this issue may be
reprinted under the following terms only: articles must remain unedited
and include the issue number and author at the top of each article
reprinted. Reprint permission is granted, unless otherwise noted at the
beginning of the article, to registered Atari user groups and not for
profit publications. Opinions presented herein are those of the individual
authors and do not necessarily reflect those of the staff, or of the


Atari, ST, Mega ST, STE, Mega STE, TT030, Atari Falcon030, TOS,
MultiTOS, NewDesk, BLiTTER, Atari Lynx, ComLynx, Atari Jaguar, Atari
Portfolio, and the Atari Fuji Symbol are all trademarks or registered
trademarks of Atari Corporation. All other trademarks mentioned in
this issue belong to their respective owners.


                      Atari Explorer Online Magazine
                    "Your Only Independent Atari Online"
                   Copyright = 1993, Subspace Publishers

                                   * * *
                                   * * *
                                   * * *
                                  *  *  *
                                 *   *   *
 :::::::::::::::::::::::::::::: A    E    O :::::::::::::::::::::::::::::::
 :: Volume 2 - Issue 15     ATARI EXPLORER ONLINE      4 September 1993  ::

Return to message index